Re: [PATCH 1/6] mfd: max77843: Add max77843 MFD driver core driver

From: Beomho Seo
Date: Fri Jan 23 2015 - 01:41:23 EST

On 01/23/2015 03:32 PM, Krzysztof Kozlowski wrote:
> 2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>:
>> This patch adds MAX77843 core/irq driver to support PMIC,
>> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
>> LED and Haptic device.
>>
>> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
>> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
>> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
>> ---
>> drivers/mfd/Kconfig | 14 ++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/max77843.c | 241 ++++++++++++++++++++
>> include/linux/mfd/max77843-private.h | 410 ++++++++++++++++++++++++++++++++++
>> 4 files changed, 666 insertions(+)
>> create mode 100644 drivers/mfd/max77843.c
>> create mode 100644 include/linux/mfd/max77843-private.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 2e6b731..0c67c79 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -442,6 +442,20 @@ config MFD_MAX77693
>> additional drivers must be enabled in order to use the functionality
>> of the device.
>>
>> +config MFD_MAX77843
>> + bool "Maxim Semiconductor MAX77843 PMIC Support"
>> + depends on I2C=y
>> + select MFD_CORE
>> + select REGMAP_I2C
>> + select REGMAP_IRQ
>> + help
>> + Say yes here to add support for Maxim Semiconductor MAX77843.
>> + This is companion Power Management IC with LEDs, Haptic, Charger,
>> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
>> + This driver provides common support for accessing the device;
>> + additional drivers must be enabled in order to use the functionality
>> + of the device.
>> +
>> config MFD_MAX8907
>> tristate "Maxim Semiconductor MAX8907 PMIC Support"
>> select MFD_CORE
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 53467e2..fe4f75c 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
>> obj-$(CONFIG_MFD_MAX14577) += max14577.o
>> obj-$(CONFIG_MFD_MAX77686) += max77686.o
>> obj-$(CONFIG_MFD_MAX77693) += max77693.o
>> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
>> obj-$(CONFIG_MFD_MAX8907) += max8907.o
>> max8925-objs := max8925-core.o max8925-i2c.o
>> obj-$(CONFIG_MFD_MAX8925) += max8925.o
>> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
>> new file mode 100644
>> index 0000000..d7f8b76
>> --- /dev/null
>> +++ b/drivers/mfd/max77843.c
>> @@ -0,0 +1,241 @@
>> +/*
>> + * max77843.c - MFD core driver for the Maxim MAX77843
>> + *
>> + * Copyright (C) 2014 Samsung Electrnoics
>> + * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/module.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/max77843-private.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +
>> +static const struct mfd_cell max77843_devs[] = {
>> + {
>> + .name = "max77843-muic",
>> + .of_compatible = "maxim,max77843-muic",
>> + }, {
>> + .name = "max77843-regulator",
>> + .of_compatible = "maxim,max77843-regulator",
>> + }, {
>> + .name = "max77843-charger",
>> + .of_compatible = "maxim,max77843-charger"
>> + }, {
>> + .name = "max77843-fuelgauge",
>> + .of_compatible = "maxim,max77843-fuelgauge",
>> + },
>> +};
>> +
>> +static const struct regmap_config max77843_charger_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .max_register = MAX77843_CHG_REG_END,
>> +};
>> +
>> +static const struct regmap_config max77843_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .max_register = MAX77843_SYS_REG_END,
>> +};
>> +
>> +static const struct regmap_irq max77843_irqs[] = {
>> + /* TOPSYS interrupts */
>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
>> +};
>> +
>> +static const struct regmap_irq_chip max77843_irq_chip = {
>> + .name = "max77843",
>> + .status_base = MAX77843_SYS_REG_SYSINTSRC,
>> + .mask_base = MAX77843_SYS_REG_SYSINTMASK,
>> + .mask_invert = false,
>> + .num_regs = 1,
>> + .irqs = max77843_irqs,
>> + .num_irqs = ARRAY_SIZE(max77843_irqs),
>> +};
>> +
>> +static int max77843_chg_init(struct max77843 *max77843)
>> +{
>
> Could this function be moved to the charger driver? This way the
> driver will manage its own resources instead of depending on parent
> MFD driver.
>

Charger regulator and Charger share same resources.
So I include this function core driver.

>> + int ret;
>> +
>> + max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
>> + if (!max77843->i2c_chg) {
>> + dev_err(&max77843->i2c->dev,
>> + "Cannot allocate I2C device for Charger\n");
>> + return PTR_ERR(max77843->i2c_chg);
>> + }
>> + i2c_set_clientdata(max77843->i2c_chg, max77843);
>> +
>> + max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
>> + &max77843_charger_regmap_config);
>> + if (IS_ERR(max77843->regmap_chg)) {
>> + ret = PTR_ERR(max77843->regmap_chg);
>> + goto err_chg_i2c;
>> + }
>> +
>> + return 0;
>> +
>> +err_chg_i2c:
>> + i2c_unregister_device(max77843->i2c_chg);
>> +
>> + return ret;
>> +}
>> +
>> +static int max77843_probe(struct i2c_client *i2c,
>> + const struct i2c_device_id *id)
>> +{
>> + struct max77843 *max77843;
>> + int ret;
>> + unsigned int reg_data;
>> +
>> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
>> + if (!max77843)
>> + return -ENOMEM;
>> +
>> + i2c_set_clientdata(i2c, max77843);
>> + max77843->dev = &i2c->dev;
>> + max77843->i2c = i2c;
>> + max77843->irq = i2c->irq;
>> +
>> + max77843->regmap = devm_regmap_init_i2c(i2c,
>> + &max77843_regmap_config);
>> + if (IS_ERR(max77843->regmap)) {
>> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
>> + return PTR_ERR(max77843->regmap);
>> + }
>> +
>> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
>> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
>> + 0, &max77843_irq_chip, &max77843->irq_data);
>
> Why shared IRQ?
>
>> + if (ret) {
>> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
>> + return ret;
>> + }
>> +
>> + ret = regmap_read(max77843->regmap,
>> + MAX77843_SYS_REG_PMICID, &reg_data);
>> + if (ret < 0) {
>> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
>> + goto err_pmic_id;
>> + }
>> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
>> +
>> + ret = max77843_chg_init(max77843);
>> + if (ret) {
>> + dev_err(&i2c->dev, "Failed to init Charger\n");
>> + goto err_pmic_id;
>> + }
>> +
>> + ret = regmap_update_bits(max77843->regmap,
>> + MAX77843_SYS_REG_INTSRCMASK,
>> + MAX77843_INTSRC_MASK_MASK,
>> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
>> + if (ret < 0) {
>> + dev_err(&i2c->dev, "Failed to unmask interrupt sourece\n");
>
> s/sourece/source/
>
> Best regards,
> Krzysztof
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/