[PATCH 11/18] spi/xilinx: Remove rx_fn and tx_fn pointer
From: Ricardo Ribalda Delgado
Date: Fri Jan 23 2015 - 11:09:21 EST
Simplify the code by removing the tx and and rx function pointers and
substitute them by a single function.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
---
drivers/spi/spi-xilinx.c | 69 +++++++++++++-----------------------------------
1 file changed, 18 insertions(+), 51 deletions(-)
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 29edf1b..6b6c658 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -92,8 +92,6 @@ struct xilinx_spi {
u32 cs_inactive; /* Level of the CS pins when inactive*/
unsigned int (*read_fn)(void __iomem *);
void (*write_fn)(u32, void __iomem *);
- void (*tx_fn)(struct xilinx_spi *);
- void (*rx_fn)(struct xilinx_spi *);
};
static void xspi_write32(u32 val, void __iomem *addr)
@@ -116,49 +114,32 @@ static unsigned int xspi_read32_be(void __iomem *addr)
return ioread32be(addr);
}
-static void xspi_tx8(struct xilinx_spi *xspi)
-{
- xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET);
- xspi->tx_ptr++;
-}
-
-static void xspi_tx16(struct xilinx_spi *xspi)
-{
- xspi->write_fn(*(u16 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
- xspi->tx_ptr += 2;
-}
-
-static void xspi_tx32(struct xilinx_spi *xspi)
+static void xilinx_spi_tx(struct xilinx_spi *xspi)
{
xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
- xspi->tx_ptr += 4;
+ xspi->tx_ptr += xspi->bits_per_word/8;
}
-static void xspi_rx8(struct xilinx_spi *xspi)
+static void xilinx_spi_rx(struct xilinx_spi *xspi)
{
u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
- if (xspi->rx_ptr) {
- *xspi->rx_ptr = data & 0xff;
- xspi->rx_ptr++;
- }
-}
-static void xspi_rx16(struct xilinx_spi *xspi)
-{
- u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
- if (xspi->rx_ptr) {
- *(u16 *)(xspi->rx_ptr) = data & 0xffff;
- xspi->rx_ptr += 2;
- }
-}
+ if (!xspi->rx_ptr)
+ return;
-static void xspi_rx32(struct xilinx_spi *xspi)
-{
- u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
- if (xspi->rx_ptr) {
+ switch (xspi->bits_per_word) {
+ case 8:
+ *(u8 *)(xspi->rx_ptr) = data;
+ break;
+ case 16:
+ *(u16 *)(xspi->rx_ptr) = data;
+ break;
+ case 32:
*(u32 *)(xspi->rx_ptr) = data;
- xspi->rx_ptr += 4;
+ break;
}
+
+ xspi->rx_ptr += xspi->bits_per_word/8;
}
static void xspi_init_hw(struct xilinx_spi *xspi)
@@ -250,7 +231,7 @@ static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi, int n_words)
while (n_words--)
if (xspi->tx_ptr)
- xspi->tx_fn(xspi);
+ xilinx_spi_tx(xspi);
else
xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET);
return;
@@ -301,7 +282,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
/* Read out all the data from the Rx FIFO */
while (n_words--)
- xspi->rx_fn(xspi);
+ xilinx_spi_rx(xspi);
}
return t->len - xspi->remaining_bytes;
@@ -423,20 +404,6 @@ static int xilinx_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
xspi->bits_per_word = bits_per_word;
- if (xspi->bits_per_word == 8) {
- xspi->tx_fn = xspi_tx8;
- xspi->rx_fn = xspi_rx8;
- } else if (xspi->bits_per_word == 16) {
- xspi->tx_fn = xspi_tx16;
- xspi->rx_fn = xspi_rx16;
- } else if (xspi->bits_per_word == 32) {
- xspi->tx_fn = xspi_tx32;
- xspi->rx_fn = xspi_rx32;
- } else {
- ret = -EINVAL;
- goto put_master;
- }
-
xspi->buffer_size = xilinx_spi_find_buffer_size(xspi);
xspi->irq = platform_get_irq(pdev, 0);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/