[PATCH 2/2] x86/kernel/earlyprintk: use macros which are already defined

[Alexander Kuleshov]

Use macros which are already defined at <linux/serial_reg.h> for earlyprintk.

Signed-off-by: Alexander Kuleshov <kuleshovmail@xxxxxxxxx>
---
 arch/x86/kernel/early_printk.c | 40 +++++++++++++---------------------------
 1 file changed, 13 insertions(+), 27 deletions(-)

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 01d1c18..99ff7ee 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -7,6 +7,7 @@
 #include <linux/pci_regs.h>
 #include <linux/pci_ids.h>
 #include <linux/errno.h>
+#include <linux/serial_reg.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/fcntl.h>
@@ -78,29 +79,14 @@ static struct console early_vga_console = {

 static int early_serial_base = 0x3f8;  /* ttyS0 */

-#define XMTRDY          0x20
-
-#define DLAB		0x80
-
-#define TXR             0       /*  Transmit register (WRITE) */
-#define RXR             0       /*  Receive register  (READ)  */
-#define IER             1       /*  Interrupt Enable          */
-#define IIR             2       /*  Interrupt ID              */
-#define FCR             2       /*  FIFO control              */
-#define LCR             3       /*  Line control              */
-#define MCR             4       /*  Modem control             */
-#define LSR             5       /*  Line Status               */
-#define MSR             6       /*  Modem Status              */
-#define DLL             0       /*  Divisor Latch Low         */
-#define DLH             1       /*  Divisor latch High        */
-
 static int early_serial_putc(unsigned char ch)
 {
 	unsigned timeout = 0xffff;

-	while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+	while ((inb(early_serial_base + UART_LSR) & UART_LSR_THRE) == 0 &&
+	       --timeout)
 		cpu_relax();
-	outb(ch, early_serial_base + TXR);
+	outb(ch, early_serial_base + UART_TX);
 	return timeout ? 0 : -1;
 }

@@ -145,10 +131,10 @@ static __init void early_serial_init(char *s)
 			s++;
 	}

-	outb(0x3, early_serial_base + LCR);	/* 8n1 */
-	outb(0, early_serial_base + IER);	/* no interrupt */
-	outb(0, early_serial_base + FCR);	/* no fifo */
-	outb(0x3, early_serial_base + MCR);	/* DTR + RTS */
+	outb(0x3, early_serial_base + UART_LCR);	/* 8n1 */
+	outb(0, early_serial_base + UART_IER);		/* no interrupt */
+	outb(0, early_serial_base + UART_FCR);		/* no fifo */
+	outb(0x3, early_serial_base + UART_MCR);	/* DTR + RTS */

 	if (*s) {
 		baud = simple_strtoul(s, &e, 0);
@@ -157,11 +143,11 @@ static __init void early_serial_init(char *s)
 	}

 	divisor = 115200 / baud;
-	c = inb(early_serial_base + LCR);
-	outb(c | DLAB, early_serial_base + LCR);
-	outb(divisor & 0xff, early_serial_base + DLL);
-	outb((divisor >> 8) & 0xff, early_serial_base + DLH);
-	outb(c & ~DLAB, early_serial_base + LCR);
+	c = inb(early_serial_base + UART_LCR);
+	outb(c | UART_LCR_DLAB, early_serial_base + UART_LCR);
+	outb(divisor & 0xff, early_serial_base + UART_DLL);
+	outb((divisor >> 8) & 0xff, early_serial_base + UART_DLM);
+	outb(c & ~UART_LCR_DLAB, early_serial_base + UART_LCR);
 }

 static struct console early_serial_console = {
--
2.3.0.rc1.275.g028c360
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/