[PATCH] Devicetree binding for omap3-serial & bcm2048 combination

[Pavel Machek]

Nokia N900 contains bluetooth module connected on serial
port. Unfortunately, serial and bluetooth are rather closely coupled,
so standard serial driver can not be used, and we really don't want
/dev/ttyS1 to be published for internal port of bluetooth
stack... Hence solution below.

Signed-off-by: Pavel Machek <pavel@xxxxxx>

diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 342eedd..e9fde42 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -4,7 +4,14 @@ Required properties:
 - compatible : should be "ti,omap2-uart" for OMAP2 controllers
 - compatible : should be "ti,omap3-uart" for OMAP3 controllers
 - compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- compatible : should be "ti+brcm,omap3-uart,bcm2048" for bcm2048
+	       bluetooth connected to OMAP3 serial
 - ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
 
 Optional properties:
 - clock-frequency : frequency of the clock input to the UART
+
+Required properties for ti+brcm,omap3-uart,bcm2048:
+- reset-gpios : gpio for reset pin
+- host-wakeup-gpios : gpio for host wakeup
+- bluetooth-wakeup-gpios : gpio for bluetooth wakeup

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/