[PATCH v2] Input: MT - Add support for balanced slot assignment

From: Henrik Rydberg
Date: Sun Feb 01 2015 - 03:16:10 EST


Some devices are not fast enough to differentiate between a
fast-moving contact and a new contact. This problem cannot be fully
resolved because information is truly missing, but it is possible
to safe-guard against obvious mistakes by restricting movement with
a maximum displacement.

The new problem formulation for dmax > 0 cannot benefit from the
speedup for positive definite matrices, but since the convergence is
faster, the result is about the same. For a handful of contacts, the
latency difference is truly negligible.

Suggested-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Tested-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Signed-off-by: Henrik Rydberg <rydberg@xxxxxxxxxxx>
---
drivers/input/input-mt.c | 31 ++++++++++++++++++++-----------
drivers/input/mouse/alps.c | 2 +-
drivers/input/mouse/bcm5974.c | 2 +-
drivers/input/mouse/cypress_ps2.c | 2 +-
drivers/input/mouse/synaptics.c | 2 +-
drivers/input/touchscreen/pixcir_i2c_ts.c | 2 +-
include/linux/input/mt.h | 3 ++-
7 files changed, 27 insertions(+), 17 deletions(-)

diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index fbe29fc..cb150a1 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -293,7 +293,7 @@ void input_mt_sync_frame(struct input_dev *dev)
}
EXPORT_SYMBOL(input_mt_sync_frame);

-static int adjust_dual(int *begin, int step, int *end, int eq)
+static int adjust_dual(int *begin, int step, int *end, int eq, int mu)
{
int f, *p, s, c;

@@ -311,9 +311,10 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
s = *p;

c = (f + s + 1) / 2;
- if (c == 0 || (c > 0 && !eq))
+ if (c == 0 || (c > mu && (!eq || mu > 0)))
return 0;
- if (s < 0)
+ /* Improve convergence for positive matrices by penalizing overcovers */
+ if (s < 0 && mu <= 0)
c *= 2;

for (p = begin; p != end; p += step)
@@ -322,23 +323,24 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
return (c < s && s <= 0) || (f >= 0 && f < c);
}

-static void find_reduced_matrix(int *w, int nr, int nc, int nrc)
+static void find_reduced_matrix(int *w, int nr, int nc, int nrc, int mu)
{
int i, k, sum;

for (k = 0; k < nrc; k++) {
for (i = 0; i < nr; i++)
- adjust_dual(w + i, nr, w + i + nrc, nr <= nc);
+ adjust_dual(w + i, nr, w + i + nrc, nr <= nc, mu);
sum = 0;
for (i = 0; i < nrc; i += nr)
- sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr);
+ sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr, mu);
if (!sum)
break;
}
}

static int input_mt_set_matrix(struct input_mt *mt,
- const struct input_mt_pos *pos, int num_pos)
+ const struct input_mt_pos *pos, int num_pos,
+ int mu)
{
const struct input_mt_pos *p;
struct input_mt_slot *s;
@@ -352,7 +354,7 @@ static int input_mt_set_matrix(struct input_mt *mt,
y = input_mt_get_value(s, ABS_MT_POSITION_Y);
for (p = pos; p != pos + num_pos; p++) {
int dx = x - p->x, dy = y - p->y;
- *w++ = dx * dx + dy * dy;
+ *w++ = dx * dx + dy * dy - mu;
}
}

@@ -393,17 +395,24 @@ static void input_mt_set_slots(struct input_mt *mt,
* @slots: the slot assignment to be filled
* @pos: the position array to match
* @num_pos: number of positions
+ * @dmax: maximum ABS_MT_POSITION displacement (zero for infinite)
*
* Performs a best match against the current contacts and returns
* the slot assignment list. New contacts are assigned to unused
* slots.
*
+ * The assignments are balanced so that all coordinate displacements are
+ * below the euclidian distance dmax. If no such assignment can be found,
+ * some contacts are assigned to unused slots.
+ *
* Returns zero on success, or negative error in case of failure.
*/
int input_mt_assign_slots(struct input_dev *dev, int *slots,
- const struct input_mt_pos *pos, int num_pos)
+ const struct input_mt_pos *pos, int num_pos,
+ int dmax)
{
struct input_mt *mt = dev->mt;
+ int mu = 2 * dmax * dmax;
int nrc;

if (!mt || !mt->red)
@@ -413,8 +422,8 @@ int input_mt_assign_slots(struct input_dev *dev, int *slots,
if (num_pos < 1)
return 0;

- nrc = input_mt_set_matrix(mt, pos, num_pos);
- find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc);
+ nrc = input_mt_set_matrix(mt, pos, num_pos, mu);
+ find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc, mu);
input_mt_set_slots(mt, slots, num_pos);

return 0;
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 54ff0379..6c64fb2 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -435,7 +435,7 @@ static void alps_report_mt_data(struct psmouse *psmouse, int n)
struct alps_fields *f = &priv->f;
int i, slot[MAX_TOUCHES];

- input_mt_assign_slots(dev, slot, f->mt, n);
+ input_mt_assign_slots(dev, slot, f->mt, n, 0);
for (i = 0; i < n; i++)
alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y);

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index c329cdb..b10709f 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -564,7 +564,7 @@ static int report_tp_state(struct bcm5974 *dev, int size)
dev->index[n++] = &f[i];
}

- input_mt_assign_slots(input, dev->slots, dev->pos, n);
+ input_mt_assign_slots(input, dev->slots, dev->pos, n, 0);

for (i = 0; i < n; i++)
report_finger_data(input, dev->slots[i],
diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
index 8af34ff..9118a18 100644
--- a/drivers/input/mouse/cypress_ps2.c
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -538,7 +538,7 @@ static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt)
pos[i].y = contact->y;
}

- input_mt_assign_slots(input, slots, pos, n);
+ input_mt_assign_slots(input, slots, pos, n, 0);

for (i = 0; i < n; i++) {
contact = &report_data.contacts[i];
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index f947292..84d0401 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1204,7 +1204,7 @@ static void synaptics_profile_sensor_process(struct psmouse *psmouse,
pos[i].y = synaptics_invert_y(hw[i]->y);
}

- input_mt_assign_slots(dev, slot, pos, nsemi);
+ input_mt_assign_slots(dev, slot, pos, nsemi, 0);

for (i = 0; i < nsemi; i++) {
input_mt_slot(dev, slot[i]);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index fc49c75..ccdf654 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -126,7 +126,7 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
pos[i].y = touch->y;
}

- input_mt_assign_slots(ts->input, slots, pos, n);
+ input_mt_assign_slots(ts->input, slots, pos, n, 0);
}

for (i = 0; i < n; i++) {
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
index f583ff6..d7188de 100644
--- a/include/linux/input/mt.h
+++ b/include/linux/input/mt.h
@@ -119,7 +119,8 @@ struct input_mt_pos {
};

int input_mt_assign_slots(struct input_dev *dev, int *slots,
- const struct input_mt_pos *pos, int num_pos);
+ const struct input_mt_pos *pos, int num_pos,
+ int dmax);

int input_mt_get_slot_by_key(struct input_dev *dev, int key);

--
2.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/