Re: Linux 3.19-rc3

[Paul E. McKenney]

On Mon, Feb 02, 2015 at 02:03:33PM -0500, Peter Hurley wrote:
> On 02/02/2015 11:11 AM, Paul E. McKenney wrote:
> > On Tue, Jan 20, 2015 at 09:03:12AM -0500, Peter Hurley wrote:
> >> On 01/19/2015 07:30 PM, Paul E. McKenney wrote:
> >>> On Tue, Jan 06, 2015 at 12:47:53PM -0800, Paul E. McKenney wrote:
> >>>> On Tue, Jan 06, 2015 at 02:57:37PM -0500, Peter Hurley wrote:
> >>>
> >>> [ . . . ]
> >>>
> >>>> David Miller's call, actually.
> >>>>
> >>>> But the rule is that if it is an atomic read-modify-write operation and it
> >>>> returns a value, then the operation itself needs to include full memory
> >>>> barriers before and after (as in the caller doesn't need to add them).
> >>>> Otherwise, the operation does not need to include memory ordering.
> >>>> Since xchg(), atomic_xchg(), and atomic_long_xchg() all return a value,
> >>>> their implementations must include full memory barriers before and after.
> >>>>
> >>>> Pretty straightforward.  ;-)
> >>>
> >>> Hello again, Peter,
> >>>
> >>> Were you going to push a patch clarifying this?
> >>
> >> Hi Paul,
> >>
> >> As you pointed out, atomic_ops.txt is for arch implementors, so I wasn't
> >> planning on patching that file.
> >>
> >> I've been meaning to write up something specifically for everyone else but
> >> my own bugs have kept me from that. [That, and I'm not sure what I write
> >> will be suitable for Documentation.]
> > 
> > Well, upon revisiting this after coming back from travel, I am more inclined
> > to agree that a change would be good.  I doubt if you would be the only
> > person who might be confused.  So how about the following patch?
> 
> I think this is much clearer to both audiences. Thanks!
> 
> Regards,
> Peter Hurley
> 
> [minor corrections below]
> 
> > ------------------------------------------------------------------------
> > 
> > documentation: Clarify memory-barrier semantics of atomic operations
> > 
> > All value-returning atomic read-modify-write operations must provide full
> > memory-barrier semantics on both sides of the operation.  This commit
> > clarifies the documentation to make it clear that these memory-barrier
> > semantics are provided by the operations themselves, not by their callers.
> > 
> > Reported-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
> > 
> > diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
> > index 183e41bdcb69..672201e79c49 100644
> > --- a/Documentation/atomic_ops.txt
> > +++ b/Documentation/atomic_ops.txt
> > @@ -201,11 +201,11 @@ These routines add 1 and subtract 1, respectively, from the given
> >  atomic_t and return the new counter value after the operation is
> >  performed.
> >  
> > -Unlike the above routines, it is required that explicit memory
> > -barriers are performed before and after the operation.  It must be
> > -done such that all memory operations before and after the atomic
> > -operation calls are strongly ordered with respect to the atomic
> > -operation itself.
> > +Unlike the above routines, it is required that these primitives
> > +inlude explicit memory barriers that are performed before and after
>    ^^^^^^
>    include|provide

Good catch, switched to "include".

> > +the operation.  It must be done such that all memory operations before
> > +and after the atomic operation calls are strongly ordered with respect
> > +to the atomic operation itself.
> >  
> >  For example, it should behave as if a smp_mb() call existed both
> >  before and after the atomic operation.
> > @@ -233,21 +233,21 @@ These two routines increment and decrement by 1, respectively, the
> >  given atomic counter.  They return a boolean indicating whether the
> >  resulting counter value was zero or not.
> >  
> > -It requires explicit memory barrier semantics around the operation as
> > -above.
> > +Again, these primitive provide explicit memory barrier semantics around
>                          ^
>                          s

Good eyes, fixed.

							Thanx, Paul

> > +the atomic operation.
> >  
> >  	int atomic_sub_and_test(int i, atomic_t *v);
> >  
> >  This is identical to atomic_dec_and_test() except that an explicit
> > -decrement is given instead of the implicit "1".  It requires explicit
> > -memory barrier semantics around the operation.
> > +decrement is given instead of the implicit "1".  This primitive must
> > +provide explicit memory barrier semantics around the operation.
> >  
> >  	int atomic_add_negative(int i, atomic_t *v);
> >  
> > -The given increment is added to the given atomic counter value.  A
> > -boolean is return which indicates whether the resulting counter value
> > -is negative.  It requires explicit memory barrier semantics around the
> > -operation.
> > +The given increment is added to the given atomic counter value.  A boolean
> > +is return which indicates whether the resulting counter value is negative.
> > +This primitive must provide explicit memory barrier semantics around
> > +the operation.
> >  
> >  Then:
> >  
> > @@ -257,7 +257,7 @@ This performs an atomic exchange operation on the atomic variable v, setting
> >  the given new value.  It returns the old value that the atomic variable v had
> >  just before the operation.
> >  
> > -atomic_xchg requires explicit memory barriers around the operation.
> > +atomic_xchg must provide explicit memory barriers around the operation.
> >  
> >  	int atomic_cmpxchg(atomic_t *v, int old, int new);
> >  
> > @@ -266,7 +266,7 @@ with the given old and new values. Like all atomic_xxx operations,
> >  atomic_cmpxchg will only satisfy its atomicity semantics as long as all
> >  other accesses of *v are performed through atomic_xxx operations.
> >  
> > -atomic_cmpxchg requires explicit memory barriers around the operation.
> > +atomic_cmpxchg must provide explicit memory barriers around the operation.
> >  
> >  The semantics for atomic_cmpxchg are the same as those defined for 'cas'
> >  below.
> > @@ -279,8 +279,8 @@ If the atomic value v is not equal to u, this function adds a to v, and
> >  returns non zero. If v is equal to u then it returns zero. This is done as
> >  an atomic operation.
> >  
> > -atomic_add_unless requires explicit memory barriers around the operation
> > -unless it fails (returns 0).
> > +atomic_add_unless must provide explicit memory barriers around the
> > +operation unless it fails (returns 0).
> >  
> >  atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0)
> >  
> > @@ -460,9 +460,9 @@ the return value into an int.  There are other places where things
> >  like this occur as well.
> >  
> >  These routines, like the atomic_t counter operations returning values,
> > -require explicit memory barrier semantics around their execution.  All
> > -memory operations before the atomic bit operation call must be made
> > -visible globally before the atomic bit operation is made visible.
> > +must provide explicit memory barrier semantics around their execution.
> > +All memory operations before the atomic bit operation call must be
> > +made visible globally before the atomic bit operation is made visible.
> >  Likewise, the atomic bit operation must be visible globally before any
> >  subsequent memory operation is made visible.  For example:
> >  
> > @@ -536,8 +536,9 @@ except that two underscores are prefixed to the interface name.
> >  These non-atomic variants also do not require any special memory
> >  barrier semantics.
> >  
> > -The routines xchg() and cmpxchg() need the same exact memory barriers
> > -as the atomic and bit operations returning values.
> > +The routines xchg() and cmpxchg() must provide the same exact
> > +memory-barrier semantics as the atomic and bit operations returning
> > +values.
> >  
> >  Spinlocks and rwlocks have memory barrier expectations as well.
> >  The rule to follow is simple:
> > 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/