Re: [PATCH v3 1/2] watchdog: dw_wdt: pat the watchdog before enabling it

[Wim Van Sebroeck]

Hi Doug,

> On some dw_wdt implementations the "top" register may be initted to 0
> at bootup.  In such a case, each "pat" of the watchdog will reset the
> timer to 0xffff.  That's pretty short.
> 
> The input clock of the wdt can be any of a wide range of values.  On
> an rk3288 system, I've seen the wdt clock be 24.75 MHz.  That means
> each tick is ~40ns and we'll count to 0xffff in ~2.6ms.
> 
> Because of the above two facts, it's a really good idea to pat the
> watchdog after initting the "top" register properly and before
> enabling the watchdog.  If you don't then there's no way we'll get the
> next heartbeat in time.
> 
> Jisheng Zhang fixed this problem on some dw_wdt versions by using the
> TOP_INIT feature.  However, the dw_wdt on rk3288 doesn't have TOP_INIT
> so it's a good idea to also pat the watchdog manually.
> 
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>

Patch has been added to linux-watchdog-next.

Kind regards,
Wim.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/