[PATCH 3.10 06/51] can: kvaser_usb: Fix state handling upon BUS_ERROR events

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Ahmed S. Darwish" <ahmed.darwish@xxxxxxxxx>

commit e638642b08c170d2021b706f0b1c4f4ae93d8cbd upstream.

While being in an ERROR_WARNING state, and receiving further
bus error events with error counters still in the ERROR_WARNING
range of 97-127 inclusive, the state handling code erroneously
reverts back to ERROR_ACTIVE.

Per the CAN standard, only revert to ERROR_ACTIVE when the
error counters are less than 96.

Moreover, in certain Kvaser models, the BUS_ERROR flag is
always set along with undefined bits in the M16C status
register. Thus use bitwise operators instead of full equality
for checking that register against bus errors.

Signed-off-by: Ahmed S. Darwish <ahmed.darwish@xxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/can/usb/kvaser_usb.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -690,9 +690,7 @@ static void kvaser_usb_rx_error(const st
 		}
 
 		new_state = CAN_STATE_ERROR_PASSIVE;
-	}
-
-	if (status == M16C_STATE_BUS_ERROR) {
+	} else if (status & M16C_STATE_BUS_ERROR) {
 		if ((priv->can.state < CAN_STATE_ERROR_WARNING) &&
 		    ((txerr >= 96) || (rxerr >= 96))) {
 			cf->can_id |= CAN_ERR_CRTL;
@@ -702,7 +700,8 @@ static void kvaser_usb_rx_error(const st
 
 			priv->can.can_stats.error_warning++;
 			new_state = CAN_STATE_ERROR_WARNING;
-		} else if (priv->can.state > CAN_STATE_ERROR_ACTIVE) {
+		} else if ((priv->can.state > CAN_STATE_ERROR_ACTIVE) &&
+			   ((txerr < 96) && (rxerr < 96))) {
 			cf->can_id |= CAN_ERR_PROT;
 			cf->data[2] = CAN_ERR_PROT_ACTIVE;
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/