[PATCH_V2 00/34] jz4780 & CI20 support

From: Zubair Lutfullah Kakakhel
Date: Wed Feb 04 2015 - 10:34:34 EST

Next message: Zubair Lutfullah Kakakhel: "[PATCH_V2 10/34] MIPS: jz4740: remove non-DT interrupt controller init"
Previous message: Zubair Lutfullah Kakakhel: "[PATCH_V2 11/34] MIPS: jz4740: register an irq_domain for the interrupt controller"
Next in thread: Zubair Lutfullah Kakakhel: "[PATCH_V2 32/34] MIPS: initial Ingenic jz4780 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

This series introduces initial support for the Ingenic jz4780 SoC & the
MIPS Creator CI20 board which is based upon it.

The jz4780 shares aspects with jz4740. But jz4740 is platform only.

So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT
for some things in order to ease the process of sharing code.

Series is based on 3.19-rc7.

ACKS from various subsystems are welcome so that the series can
go via mips if that is OK with everyone.

Alternative suggestions welcome.

Changes in V2
- Removed FSF addresses.
- Removed 2 patches for binding docs that
were consolidated in the same binding for jz4740.
- Bug fix in error handling in cgu
- Rebase on 3.19-rc7
- Updated defconfig with jz47xx serial and removed initramfs
- Renames in binding from intc to interrupt-controller
- Fix in jz47xx serial for build error on x86 in one config option
- Removed interupt-parent bindings from required bindings
- Fixed imgtec prefix to img
- Added jz47xx config for qi_lb60_defconfig

Regards,
ZubairLK

Paul Burton (34):
dt: Add Ingenic Semiconductor vendor prefix
MIPS: jz4740: require & include DT
MIPS: irq_cpu: declare irqchip table entry
MIPS: jz4740: probe CPU interrupt controller via DT
MIPS: jz4740: use generic plat_irq_dispatch
MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c
dt: interrupt-controller: Add ingenic,jz4740-intc binding doc
MIPS: jz4740: allow interrupt controller probe via DT
MIPS: jz4740: probe interrupt controller via DT
MIPS: jz4740: remove non-DT interrupt controller init
MIPS: jz4740: register an irq_domain for the interrupt controller
MIPS: jz4740: call jz4740_clock_init earlier
MIPS: jz4740: replace use of jz4740_clock_bdata
clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks
dt: clk: Add ingenic,jz4740-cgu binding documentation
MIPS: clk: migrate jz4740 to common clock framework
MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu
MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu
MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu
MIPS: jz4740: remove clock.h
MIPS: jz4740: only detect RAM size if not specified in DT
MIPS: jz4740: support >32 interrupts
MIPS: jz4740: define IRQ numbers based on number of intc IRQs
dt: serial: Add ingenic,jz4740-uart binding
serial: 8250_jz47xx: support for Ingenic jz47xx UARTs
MIPS: allow mach-provided serial.h
MIPS: jz4740: use jz47xx-uart & DT for UART output
dt: clk: Add ingenic,jz4780-cgu binding documentation
clk: add Ingenic jz4780 CGU driver
MIPS: jz4740: add jz4780 interrupt controller support
MIPS: add jz4780 Ingenic vendor ID
MIPS: initial Ingenic jz4780 support
MIPS: initial MIPS Creator CI20 board support
MIPS: allow jz4780 to be selected in Kconfig

.../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++
.../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++
.../interrupt-controller/ingenic,jz4740-intc.txt | 26 +
.../bindings/serial/ingenic,jz4740-uart.txt | 22 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/mips/Kconfig | 22 +-
arch/mips/boot/dts/Makefile | 2 +
arch/mips/boot/dts/ci20.dts | 21 +
arch/mips/boot/dts/jz4740.dtsi | 68 ++
arch/mips/boot/dts/jz4780.dtsi | 101 +++
arch/mips/boot/dts/qi_lb60.dts | 15 +
arch/mips/configs/ci20_defconfig | 127 +++
arch/mips/configs/qi_lb60_defconfig | 1 +
arch/mips/include/asm/Kbuild | 1 -
arch/mips/include/asm/cpu.h | 1 +
arch/mips/include/asm/mach-generic/serial.h | 21 +
arch/mips/include/asm/mach-jz4740/clock.h | 3 +
arch/mips/include/asm/mach-jz4740/irq.h | 15 +-
arch/mips/include/asm/mach-jz4740/platform.h | 2 -
arch/mips/include/asm/mach-jz4740/serial.h | 27 +
arch/mips/include/asm/serial.h | 21 +
arch/mips/jz4740/Kconfig | 10 +
arch/mips/jz4740/Makefile | 6 +-
arch/mips/jz4740/Platform | 4 +
arch/mips/jz4740/board-qi_lb60.c | 7 -
arch/mips/jz4740/clock-debugfs.c | 108 ---
arch/mips/jz4740/clock.c | 924 ---------------------
arch/mips/jz4740/clock.h | 76 --
arch/mips/jz4740/irq.c | 103 ++-
arch/mips/jz4740/platform.c | 37 +-
arch/mips/jz4740/pm.c | 2 -
arch/mips/jz4740/prom.c | 13 -
arch/mips/jz4740/reset.c | 13 +-
arch/mips/jz4740/serial.c | 33 -
arch/mips/jz4740/serial.h | 23 -
arch/mips/jz4740/setup.c | 33 +-
arch/mips/jz4740/time.c | 19 +-
arch/mips/kernel/cpu-probe.c | 1 +
arch/mips/kernel/irq_cpu.c | 3 +
drivers/clk/Makefile | 2 +
drivers/clk/jz47xx/Makefile | 3 +
drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++
drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++
drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++
drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++
drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++
drivers/tty/serial/8250/Kconfig | 9 +
drivers/tty/serial/8250/Makefile | 1 +
include/dt-bindings/clock/jz4740-cgu.h | 37 +
include/dt-bindings/clock/jz4780-cgu.h | 88 ++
50 files changed, 3070 insertions(+), 1276 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt
create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt
create mode 100644 arch/mips/boot/dts/ci20.dts
create mode 100644 arch/mips/boot/dts/jz4740.dtsi
create mode 100644 arch/mips/boot/dts/jz4780.dtsi
create mode 100644 arch/mips/boot/dts/qi_lb60.dts
create mode 100644 arch/mips/configs/ci20_defconfig
create mode 100644 arch/mips/include/asm/mach-generic/serial.h
create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h
create mode 100644 arch/mips/include/asm/serial.h
delete mode 100644 arch/mips/jz4740/clock-debugfs.c
delete mode 100644 arch/mips/jz4740/clock.c
delete mode 100644 arch/mips/jz4740/clock.h
delete mode 100644 arch/mips/jz4740/serial.c
delete mode 100644 arch/mips/jz4740/serial.h
create mode 100644 drivers/clk/jz47xx/Makefile
create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c
create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c
create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c
create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h
create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c
create mode 100644 include/dt-bindings/clock/jz4740-cgu.h
create mode 100644 include/dt-bindings/clock/jz4780-cgu.h

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Zubair Lutfullah Kakakhel: "[PATCH_V2 10/34] MIPS: jz4740: remove non-DT interrupt controller init"
Previous message: Zubair Lutfullah Kakakhel: "[PATCH_V2 11/34] MIPS: jz4740: register an irq_domain for the interrupt controller"
Next in thread: Zubair Lutfullah Kakakhel: "[PATCH_V2 32/34] MIPS: initial Ingenic jz4780 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]