[PATCH 1/2] m25p80, spi-nor: Update id list of Macronix chips
From: Jim Kuo
Date: Thu Feb 05 2015 - 13:45:17 EST
Update the Macronix chip IDs. And add two functions to m25p80.c to
support some undefined read/write actions.
Signed-off-by: Jim Kuo <jimtingkuo@xxxxxxxxx>
---
drivers/mtd/devices/m25p80.c | 83 ++++++++++++++++++++++++++++++++++++++++---
drivers/mtd/spi-nor/spi-nor.c | 44 ++++++++++++++++-------
2 files changed, 110 insertions(+), 17 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 85e35467..731f568 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -170,6 +170,74 @@ static int m25p80_erase(struct spi_nor *nor, loff_t offset)
return 0;
}
+static int m25p80_write_xfer(struct spi_nor *nor,
+ struct spi_nor_xfer_cfg *cfg, u8 *buf, size_t len)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+ struct spi_transfer t[2] = {};
+ struct spi_message m;
+ unsigned int dummy = cfg->dummy_cycles;
+ int ret;
+
+ dummy /= 8;
+
+ if (cfg->wren) {
+ ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
+ if (ret)
+ return ret;
+ }
+
+ spi_message_init(&m);
+
+ flash->command[0] = cfg->cmd;
+ m25p_addr2cmd(nor, cfg->addr, flash->command);
+
+ t[0].tx_buf = flash->command;
+ t[0].len = cfg->cmd_pins + cfg->addr_pins + dummy;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].tx_nbits = cfg->mode_pins;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(spi, &m);
+
+ return 0;
+}
+
+static int m25p80_read_xfer(struct spi_nor *nor,
+ struct spi_nor_xfer_cfg *cfg, u8 *buf, size_t len)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+ struct spi_transfer t[2];
+ struct spi_message m;
+ unsigned int dummy = cfg->dummy_cycles;
+
+ dummy /= 8;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ flash->command[0] = cfg->cmd;
+ m25p_addr2cmd(nor, cfg->addr, flash->command);
+
+ t[0].tx_buf = flash->command;
+ t[0].len = cfg->cmd_pins + cfg->addr_pins + dummy;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].rx_nbits = cfg->mode_pins;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(spi, &m);
+
+ return 0;
+}
+
/*
* board specific setup should have ensured the SPI clock used here
* matches what the READ command supports, at least until this driver
@@ -199,6 +267,8 @@ static int m25p_probe(struct spi_device *spi)
nor->erase = m25p80_erase;
nor->write_reg = m25p80_write_reg;
nor->read_reg = m25p80_read_reg;
+ nor->write_xfer = m25p80_write_xfer;
+ nor->read_xfer = m25p80_read_xfer;
nor->dev = &spi->dev;
nor->mtd = &flash->mtd;
@@ -261,10 +331,15 @@ static const struct spi_device_id m25p_ids[] = {
{"mr25h256"}, {"mr25h10"},
{"gd25q32"}, {"gd25q64"},
{"160s33b"}, {"320s33b"}, {"640s33b"},
- {"mx25l2005a"}, {"mx25l4005a"}, {"mx25l8005"}, {"mx25l1606e"},
- {"mx25l3205d"}, {"mx25l3255e"}, {"mx25l6405d"}, {"mx25l12805d"},
- {"mx25l12855e"},{"mx25l25635e"},{"mx25l25655e"},{"mx66l51235l"},
- {"mx66l1g55g"},
+ {"mx25l512e"}, {"mx25l5121e"}, {"mx25l1006e"}, {"mx25l1021e"},
+ {"mx25l2006e"}, {"mx25l4006e"}, {"mx25u4035"}, {"mx25v4035"},
+ {"mx25l8006e"}, {"mx25u8035"}, {"mx25v8035"}, {"mx25l1606e"},
+ {"mx25l1633e"}, {"mx25l1635e"}, {"mx25u1635e"}, {"mx25l3206e"},
+ {"mx25l3239e"}, {"mx25l3225d"}, {"mx25l3255e"}, {"mx25l6406e"},
+ {"mx25l6439e"}, {"mx25l12839f"}, {"mx25l12855e"},
+ {"mx25u12835f"}, {"mx25l25635e"}, {"mx25l25655e"},
+ {"mx25u25635f"}, {"mx66l51235f"}, {"mx66u51235f"},
+ {"mx66l1g45g"}, {"mx66l1g55g"},
{"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q256a"},
{"n25q512a"}, {"n25q512ax3"}, {"n25q00"},
{"pm25lv512"}, {"pm25lv010"}, {"pm25lq032"},
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 0f8ec3c..a6c7337 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -545,19 +545,37 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
/* Macronix */
- { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
- { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
- { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) },
- { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
- { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
+ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
+ { "mx25l5121e", INFO(0xc22210, 0, 64 * 1024, 1, SECT_4K) },
+ { "mx25l1006e", INFO(0xc22011, 0, 64 * 1024, 2, SECT_4K) },
+ { "mx25l1021e", INFO(0xc22211, 0, 64 * 1024, 2, SECT_4K) },
+ { "mx25l2006e", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
+ { "mx25l4006e", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25v4035", INFO(0xc22553, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25l8006e", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
+ { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, 0) },
+ { "mx25v8035", INFO(0xc22554, 0, 64 * 1024, 16, 0) },
+ { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
+ { "mx25l1633e", INFO(0xc22415, 0, 64 * 1024, 32, 0) },
+ { "mx25l1635e", INFO(0xc22515, 0, 64 * 1024, 32, 0) },
+ { "mx25u1635e", INFO(0xc22535, 0, 64 * 1024, 32, 0) },
+ { "mx25l3206e", INFO(0xc22016, 0, 64 * 1024, 64, 0) },
+ { "mx25l3239e", INFO(0xc22536, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
+ { "mx25l3225d", INFO(0xc25e16, 0, 64 * 1024, 64, 0) },
+ { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l6406e", INFO(0xc22017, 0, 64 * 1024, 128, 0) },
+ { "mx25l6439e", INFO(0xc22537, 0, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l12839f", INFO(0xc22018, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
+ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
/* Micron */
{ "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/