[PATCH 3.10 12/17] ASoC: atmel_ssc_dai: fix start event for I2S mode

From: Greg Kroah-Hartman
Date: Mon Feb 09 2015 - 03:34:56 EST


3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bo Shen <voice.shen@xxxxxxxxx>

commit a43bd7e125143b875caae6d4f9938855b440faaf upstream.

According to the I2S specification information as following:
- WS = 0, channel 1 (left)
- WS = 1, channel 2 (right)
So, the start event should be TF/RF falling edge.

Reported-by: Songjun Wu <songjun.wu@xxxxxxxxx>
Signed-off-by: Bo Shen <voice.shen@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
sound/soc/atmel/atmel_ssc_dai.c | 18 ++++--------------
1 file changed, 4 insertions(+), 14 deletions(-)

--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -331,7 +331,6 @@ static int atmel_ssc_hw_params(struct sn
struct atmel_pcm_dma_params *dma_params;
int dir, channels, bits;
u32 tfmr, rfmr, tcmr, rcmr;
- int start_event;
int ret;

/*
@@ -450,19 +449,10 @@ static int atmel_ssc_hw_params(struct sn
* The SSC transmit clock is obtained from the BCLK signal on
* on the TK line, and the SSC receive clock is
* generated from the transmit clock.
- *
- * For single channel data, one sample is transferred
- * on the falling edge of the LRC clock.
- * For two channel data, one sample is
- * transferred on both edges of the LRC clock.
*/
- start_event = ((channels == 1)
- ? SSC_START_FALLING_RF
- : SSC_START_EDGE_RF);
-
rcmr = SSC_BF(RCMR_PERIOD, 0)
| SSC_BF(RCMR_STTDLY, START_DELAY)
- | SSC_BF(RCMR_START, start_event)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
@@ -470,14 +460,14 @@ static int atmel_ssc_hw_params(struct sn
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
| SSC_BF(RFMR_FSLEN, 0)
- | SSC_BF(RFMR_DATNB, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
| SSC_BIT(RFMR_MSBF)
| SSC_BF(RFMR_LOOP, 0)
| SSC_BF(RFMR_DATLEN, (bits - 1));

tcmr = SSC_BF(TCMR_PERIOD, 0)
| SSC_BF(TCMR_STTDLY, START_DELAY)
- | SSC_BF(TCMR_START, start_event)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
@@ -486,7 +476,7 @@ static int atmel_ssc_hw_params(struct sn
| SSC_BF(TFMR_FSDEN, 0)
| SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
| SSC_BF(TFMR_FSLEN, 0)
- | SSC_BF(TFMR_DATNB, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
| SSC_BIT(TFMR_MSBF)
| SSC_BF(TFMR_DATDEF, 0)
| SSC_BF(TFMR_DATLEN, (bits - 1));


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/