Re: [PATCH/RFC v10 15/19] media: Add registration helpers for V4L2 flash sub-devices
From: Jacek Anaszewski
Date: Mon Feb 09 2015 - 06:16:09 EST
Hi Sakari,
Thanks for the review.
On 02/05/2015 06:59 PM, Sakari Ailus wrote:
Hi Jacek,
Thank you for your continuous efforts on this! I think this ended up being
more complicated than I originally anticipated.
On Fri, Jan 09, 2015 at 04:23:05PM +0100, Jacek Anaszewski wrote:
This patch adds helper functions for registering/unregistering
LED Flash class devices as V4L2 sub-devices. The functions should
be called from the LED subsystem device driver. In case the
support for V4L2 Flash sub-devices is disabled in the kernel
config the functions' empty versions will be used.
Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Sakari Ailus <sakari.ailus@xxxxxx>
Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
drivers/media/v4l2-core/Kconfig | 11 +
drivers/media/v4l2-core/Makefile | 2 +
drivers/media/v4l2-core/v4l2-flash.c | 581 ++++++++++++++++++++++++++++++++++
include/media/v4l2-flash.h | 139 ++++++++
4 files changed, 733 insertions(+)
create mode 100644 drivers/media/v4l2-core/v4l2-flash.c
create mode 100644 include/media/v4l2-flash.h
diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
index ba7e21a..f034f1a 100644
--- a/drivers/media/v4l2-core/Kconfig
+++ b/drivers/media/v4l2-core/Kconfig
@@ -44,6 +44,17 @@ config V4L2_MEM2MEM_DEV
tristate
depends on VIDEOBUF2_CORE
+# Used by LED subsystem flash drivers
+config V4L2_FLASH_LED_CLASS
+ tristate "Enable support for Flash sub-devices"
+ depends on VIDEO_V4L2_SUBDEV_API
+ depends on LEDS_CLASS_FLASH
+ ---help---
+ Say Y here to enable support for Flash sub-devices, which allow
+ to control LED class devices with use of V4L2 Flash controls.
+
+ When in doubt, say N.
+
# Used by drivers that need Videobuf modules
config VIDEOBUF_GEN
tristate
diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile
index 63d29f2..44e858c 100644
--- a/drivers/media/v4l2-core/Makefile
+++ b/drivers/media/v4l2-core/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_VIDEO_TUNER) += tuner.o
obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o
+obj-$(CONFIG_V4L2_FLASH_LED_CLASS) += v4l2-flash.o
+
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
diff --git a/drivers/media/v4l2-core/v4l2-flash.c b/drivers/media/v4l2-core/v4l2-flash.c
new file mode 100644
index 0000000..3fd6a08
--- /dev/null
+++ b/drivers/media/v4l2-core/v4l2-flash.c
@@ -0,0 +1,581 @@
+/*
+ * V4L2 Flash LED sub-device registration helpers.
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd
+ * Author: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation."
+ */
+
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <media/v4l2-flash.h>
+
+#define has_flash_op(v4l2_flash, op) \
+ (v4l2_flash && v4l2_flash->ops->op)
+
+#define call_flash_op(v4l2_flash, op, args...) \
+ (has_flash_op(v4l2_flash, op) ? \
+ v4l2_flash->ops->op(args) : \
Wouldn't you need __VA_ARGS__ here to deliver the variable argument to the
callee? Do you need variable arguments for the current flash ops?
Indeed, it would allow to avoid the need for passing v4l2_flash
argument twice. Nonetheless, as currently we have only one op, the macro
can have fixed number of arguments.
+ -EINVAL)
+
+static inline enum led_brightness v4l2_flash_intensity_to_led_brightness(
I'd drop inline and let the compiler decide. Same below.
Yes, this is a residue from the previous versions when the function
had single line probably.
+ struct v4l2_ctrl **ctrls,
+ enum ctrl_init_data_id cdata_id,
+ s32 intensity)
+{
+ struct v4l2_ctrl *ctrl = ctrls[cdata_id];
+ s64 __intensity = intensity - ctrl->minimum;
+
+ do_div(__intensity, ctrl->step);
+
+ /*
+ * Indicator leds, unlike torch leds, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Therefore it must be possible to set it to 0 level which in
+ * the LED subsystem reflects LED_OFF state.
+ */
+ if (cdata_id != INDICATOR_INTENSITY)
+ ++__intensity;
+
+ return __intensity;
+}
+
+static inline s32 v4l2_flash_led_brightness_to_intensity(
+ struct v4l2_ctrl **ctrls,
+ enum ctrl_init_data_id cdata_id,
Could you pass a pointer to struct v4l2_ctrl instead?
Good point.
+ enum led_brightness brightness)
+{
+ struct v4l2_ctrl *ctrl = ctrls[cdata_id];
+
+ /*
+ * Indicator leds, unlike torch leds, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Do not decrement brightness read from the LED subsystem for
+ * indicator led as it may equal 0. For torch leds this function
+ * is called only when V4L2_FLASH_LED_MODE_TORCH is set and the
+ * brightness read is guaranteed to be greater than 0. In the mode
+ * V4L2_FLASH_LED_MODE_NONE the cached torch intensity value is used.
+ */
+ if (cdata_id != INDICATOR_INTENSITY)
+ --brightness;
+
+ return (brightness * ctrl->step) + ctrl->minimum;
+}
+
+static int v4l2_flash_g_volatile_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ bool is_strobing;
+ int ret;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ /*
+ * Update torch brightness only if in TORCH_MODE.
+ * In other modes torch led is turned off, which
+ * would spuriously inform the user space that
+ * V4L2_CID_FLASH_TORCH_INTENSITY control setting
+ * has changed.
+ */
+ if (ctrls[LED_MODE]->val == V4L2_FLASH_LED_MODE_TORCH) {
+ ret = led_update_brightness(led_cdev);
+ if (ret < 0)
+ return ret;
+ c->val = v4l2_flash_led_brightness_to_intensity(
+ ctrls, TORCH_INTENSITY,
+ led_cdev->brightness);
+ }
+ return 0;
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ ret = led_update_brightness(led_cdev);
+ if (ret < 0)
+ return ret;
+ c->val = v4l2_flash_led_brightness_to_intensity(
+ ctrls, INDICATOR_INTENSITY,
+ led_cdev->brightness);
+ return 0;
+ case V4L2_CID_FLASH_INTENSITY:
+ ret = led_update_flash_brightness(fled_cdev);
+ if (ret < 0)
+ return ret;
+ /* no conversion is needed */
+ c->val = fled_cdev->brightness.val;
+ return 0;
+ case V4L2_CID_FLASH_STROBE_STATUS:
+ ret = led_get_flash_strobe(fled_cdev, &is_strobing);
+ if (ret < 0)
+ return ret;
+ c->val = is_strobing;
+ return 0;
+ case V4L2_CID_FLASH_FAULT:
+ /* led faults map directly to V4L2 flash faults */
+ return led_get_flash_fault(fled_cdev, &c->val);
+ case V4L2_CID_FLASH_SYNC_STROBE:
+ c->val = fled_cdev->sync_led_id;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ enum led_brightness brightness;
+ bool external_strobe;
+ int ret = 0;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_LED_MODE:
+ switch (c->val) {
+ case V4L2_FLASH_LED_MODE_NONE:
+ led_set_brightness(led_cdev, LED_OFF);
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_FLASH_LED_MODE_FLASH:
+ /* Turn the torch LED off */
+ led_set_brightness(led_cdev, LED_OFF);
+ external_strobe = (ctrls[STROBE_SOURCE]->val ==
+ V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+
+ if (has_flash_op(v4l2_flash, external_strobe_set))
+ ret = call_flash_op(v4l2_flash,
+ external_strobe_set, v4l2_flash,
+ external_strobe);
+ return ret;
+ case V4L2_FLASH_LED_MODE_TORCH:
+ /* Stop flash strobing */
+ ret = led_set_flash_strobe(fled_cdev, false);
+ if (ret < 0)
+ return ret;
+
+ brightness =
+ v4l2_flash_intensity_to_led_brightness(
+ ctrls, TORCH_INTENSITY,
+ ctrls[TORCH_INTENSITY]->val);
+ led_set_brightness(led_cdev, brightness);
+ return 0;
+ }
+ break;
+ case V4L2_CID_FLASH_STROBE_SOURCE:
+ external_strobe = (c->val == V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+
+ return call_flash_op(v4l2_flash, external_strobe_set,
+ v4l2_flash, external_strobe);
+ case V4L2_CID_FLASH_STROBE:
+ if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH ||
+ ctrls[STROBE_SOURCE]->val !=
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE)
+ return -EINVAL;
+ return led_set_flash_strobe(fled_cdev, true);
+ case V4L2_CID_FLASH_STROBE_STOP:
+ if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH ||
+ ctrls[STROBE_SOURCE]->val !=
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE)
+ return -EINVAL;
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_CID_FLASH_TIMEOUT:
+ /* no conversion is needed */
+ return led_set_flash_timeout(fled_cdev, c->val);
+ case V4L2_CID_FLASH_INTENSITY:
+ /* no conversion is needed */
+ return led_set_flash_brightness(fled_cdev, c->val);
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ brightness = v4l2_flash_intensity_to_led_brightness(
+ ctrls, INDICATOR_INTENSITY,
+ c->val);
+ led_set_brightness(led_cdev, brightness);
+ return 0;
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ /*
+ * If not in MODE_TORCH don't call led-class brightness_set
+ * op, as it would result in turning the torch led on.
+ * Instead the value is cached only and will be written
+ * to the device upon transition to MODE_TORCH.
+ */
+ if (ctrls[LED_MODE]->val == V4L2_FLASH_LED_MODE_TORCH) {
+ brightness =
+ v4l2_flash_intensity_to_led_brightness(
+ ctrls, TORCH_INTENSITY,
+ c->val);
+ led_set_brightness(led_cdev, brightness);
+ }
+ return 0;
+ case V4L2_CID_FLASH_SYNC_STROBE:
+ fled_cdev->sync_led_id = c->val;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops v4l2_flash_ctrl_ops = {
+ .g_volatile_ctrl = v4l2_flash_g_volatile_ctrl,
+ .s_ctrl = v4l2_flash_s_ctrl,
+};
+
+static void fill_ctrl_init_data(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_ctrl_config *flash_ctrl_cfg,
+ struct v4l2_flash_ctrl_data *ctrl_init_data)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ const struct led_flash_ops *fled_cdev_ops = fled_cdev->ops;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ u32 mask;
+ s64 max;
+
+ /* Init FLASH_FAULT ctrl data */
+ if (flash_ctrl_cfg->flash_faults) {
+ ctrl_init_data[FLASH_FAULT].supported = true;
+ ctrl_cfg = &ctrl_init_data[FLASH_FAULT].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_FAULT;
+ ctrl_cfg->max = flash_ctrl_cfg->flash_faults;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init INDICATOR_INTENSITY ctrl data */
+ if (flash_ctrl_cfg->indicator_led) {
+ ctrl_init_data[INDICATOR_INTENSITY].supported = true;
+ ctrl_init_data[INDICATOR_INTENSITY].config =
+ flash_ctrl_cfg->intensity;
+ ctrl_cfg = &ctrl_init_data[INDICATOR_INTENSITY].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_INDICATOR_INTENSITY;
+ ctrl_cfg->min = 0;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ /* Indicator LED can have only faults and intensity controls. */
+ return;
+ }
+
+ /* Init FLASH_LED_MODE ctrl data */
+ mask = 1 << V4L2_FLASH_LED_MODE_NONE |
+ 1 << V4L2_FLASH_LED_MODE_TORCH;
+ if (led_cdev->flags & LED_DEV_CAP_FLASH)
+ mask |= 1 << V4L2_FLASH_LED_MODE_FLASH;
+
+ ctrl_init_data[LED_MODE].supported = true;
+ ctrl_cfg = &ctrl_init_data[LED_MODE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_LED_MODE;
+ ctrl_cfg->max = V4L2_FLASH_LED_MODE_TORCH;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_LED_MODE_NONE;
+ ctrl_cfg->flags = 0;
+
+ /* Init TORCH_INTENSITY ctrl data */
+ ctrl_init_data[TORCH_INTENSITY].supported = true;
+ ctrl_init_data[TORCH_INTENSITY].config = flash_ctrl_cfg->intensity;
+ ctrl_cfg = &ctrl_init_data[TORCH_INTENSITY].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_TORCH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ if (!(led_cdev->flags & LED_DEV_CAP_FLASH))
+ return;
+
+ /* Init FLASH_STROBE_SOURCE ctrl data */
+ mask = 1 << V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
+ if (flash_ctrl_cfg->has_external_strobe) {
+ mask |= 1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL;
+ max = V4L2_FLASH_STROBE_SOURCE_EXTERNAL;
+ } else {
+ max = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
+ }
+
+ ctrl_init_data[STROBE_SOURCE].supported = true;
+ ctrl_cfg = &ctrl_init_data[STROBE_SOURCE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_SOURCE;
+ ctrl_cfg->max = max;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
+
+ /* Init FLASH_STROBE ctrl data */
+ ctrl_init_data[FLASH_STROBE].supported = true;
+ ctrl_cfg = &ctrl_init_data[FLASH_STROBE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE;
+
+ /* Init STROBE_STOP ctrl data */
+ ctrl_init_data[STROBE_STOP].supported = true;
+ ctrl_cfg = &ctrl_init_data[STROBE_STOP].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STOP;
+
+ /* Init STROBE_STATUS ctrl data */
+ if (fled_cdev_ops->strobe_get) {
+ ctrl_init_data[STROBE_STATUS].supported = true;
+ ctrl_cfg = &ctrl_init_data[STROBE_STATUS].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STATUS;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init FLASH_TIMEOUT ctrl data */
+ if (fled_cdev_ops->timeout_set) {
+ ctrl_init_data[FLASH_TIMEOUT].supported = true;
+ ctrl_init_data[FLASH_TIMEOUT].config =
+ flash_ctrl_cfg->flash_timeout;
+ ctrl_cfg = &ctrl_init_data[FLASH_TIMEOUT].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_TIMEOUT;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+ }
+
+ /* Init FLASH_INTENSITY ctrl data */
+ if (fled_cdev_ops->flash_brightness_set) {
+ ctrl_init_data[FLASH_INTENSITY].supported = true;
+ ctrl_init_data[FLASH_INTENSITY].config =
+ flash_ctrl_cfg->flash_intensity;
+ ctrl_cfg = &ctrl_init_data[FLASH_INTENSITY].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+ }
+}
+
+static int v4l2_flash_init_sync_strobe_menu(struct v4l2_flash *v4l2_flash)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct v4l2_ctrl *ctrl;
+ int i = 0;
+
+ v4l2_flash->sync_strobe_menu =
+ devm_kcalloc(fled_cdev->led_cdev.dev->parent,
+ fled_cdev->num_sync_leds + 1,
+ sizeof(*fled_cdev),
+ GFP_KERNEL);
+
+ if (!v4l2_flash->sync_strobe_menu)
+ return -ENOMEM;
+
+ v4l2_flash->sync_strobe_menu[0] = "none";
+
+ for (i = 0; i < fled_cdev->num_sync_leds; ++i)
+ v4l2_flash->sync_strobe_menu[i + 1] =
+ (char *) fled_cdev->sync_leds[i]->led_cdev.name;
What's here, and where does it come from?
The rest of the sub-devices typically have a device's (chip's) name and the
bus address (usually i2c).
It comes from the struct led_classdev's 'name' property, which is
assigned a pointer to the parsed 'label' DT property (LEDs common
bindings) string. It has to be unique as it is passed to the
device_create_with_groups in the led-class.c
We can't use device's name and I2C bus address, as a v4l2-flash sub-dev
is created per discrete LED element, not per device (many v4l2-flash
sub-devs can be created per one flash LED device).
+ ctrl = v4l2_ctrl_new_std_menu_items(
+ &v4l2_flash->hdl, &v4l2_flash_ctrl_ops,
+ V4L2_CID_FLASH_SYNC_STROBE,
+ fled_cdev->num_sync_leds,
+ 0, 0,
+ (const char * const *) v4l2_flash->sync_strobe_menu);
Do you need the casting here?
Yes, there is warning generated without it:
drivers/media/v4l2-core/v4l2-flash.c:364:3: warning: passing argument 7
of ‘v4l2_ctrl_new_std_menu_items’ from incompatible pointer type
[enabled by default]
include/media/v4l2-ctrls.h:408:19: note: expected ‘const char * const*’
but argument is of type ‘char **’
+
+ if (ctrl)
+ ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
+
+ return 0;
+}
+
+static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_ctrl_config *flash_ctrl_cfg)
+
+{
+ struct led_classdev *led_cdev = &v4l2_flash->fled_cdev->led_cdev;
+ struct v4l2_flash_ctrl_data *ctrl_init_data;
+ struct v4l2_ctrl *ctrl;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ int i, ret, num_ctrls = 0;
+
+ /* allocate memory dynamically so as not to exceed stack frame size */
+ ctrl_init_data = kcalloc(NUM_FLASH_CTRLS, sizeof(*ctrl_init_data),
+ GFP_KERNEL);
+ if (!ctrl_init_data)
+ return -ENOMEM;
+
+ memset(ctrl_init_data, 0, sizeof(*ctrl_init_data));
kcalloc() clears the memory, no need to do it again.
Right.
+ fill_ctrl_init_data(v4l2_flash, flash_ctrl_cfg, ctrl_init_data);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i)
+ if (ctrl_init_data[i].supported)
+ ++num_ctrls;
+
+ v4l2_ctrl_handler_init(&v4l2_flash->hdl, num_ctrls);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i) {
+ ctrl_cfg = &ctrl_init_data[i].config;
+ if (!ctrl_init_data[i].supported)
+ continue;
+
+ if (ctrl_cfg->id == V4L2_CID_FLASH_LED_MODE ||
+ ctrl_cfg->id == V4L2_CID_FLASH_STROBE_SOURCE)
+ ctrl = v4l2_ctrl_new_std_menu(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->max,
+ ctrl_cfg->menu_skip_mask,
+ ctrl_cfg->def);
+ else
+ ctrl = v4l2_ctrl_new_std(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->min,
+ ctrl_cfg->max,
+ ctrl_cfg->step,
+ ctrl_cfg->def);
+
+ if (ctrl)
+ ctrl->flags |= ctrl_cfg->flags;
+
+ if (i <= STROBE_SOURCE)
+ v4l2_flash->ctrls[i] = ctrl;
+ }
+
+ kfree(ctrl_init_data);
+
+ if (led_cdev->flags & LED_DEV_CAP_SYNC_STROBE) {
+ ret = v4l2_flash_init_sync_strobe_menu(v4l2_flash);
+ if (ret < 0)
+ goto error_free_handler;
+ }
+
+ if (v4l2_flash->hdl.error) {
+ ret = v4l2_flash->hdl.error;
+ goto error_free_handler;
+ }
+
+ v4l2_ctrl_handler_setup(&v4l2_flash->hdl);
+
+ v4l2_flash->sd.ctrl_handler = &v4l2_flash->hdl;
+
+ return 0;
+
+error_free_handler:
+ v4l2_ctrl_handler_free(&v4l2_flash->hdl);
+ return ret;
+}
+
+/*
+ * V4L2 subdev internal operations
+ */
+
+static int v4l2_flash_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ int ret = 0;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (!v4l2_fh_is_singular(&fh->vfh)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ led_sysfs_disable(led_cdev);
+
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+
+static int v4l2_flash_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ int ret = 0;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (has_flash_op(v4l2_flash, external_strobe_set))
+ ret = call_flash_op(v4l2_flash, external_strobe_set,
+ v4l2_flash, false);
+ led_sysfs_enable(led_cdev);
+
+ mutex_unlock(&led_cdev->led_access);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_internal_ops v4l2_flash_subdev_internal_ops = {
+ .open = v4l2_flash_open,
+ .close = v4l2_flash_close,
+};
+
+static const struct v4l2_subdev_core_ops v4l2_flash_core_ops = {
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+};
+
+static const struct v4l2_subdev_ops v4l2_flash_subdev_ops = {
+ .core = &v4l2_flash_core_ops,
+};
+
+struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
+ const struct v4l2_flash_ops *ops,
+ struct v4l2_flash_ctrl_config *config)
+{
+ struct v4l2_flash *v4l2_flash;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (!fled_cdev || !ops || !config)
+ return ERR_PTR(-EINVAL);
+
+ v4l2_flash = kzalloc(sizeof(*v4l2_flash), GFP_KERNEL);
+ if (!v4l2_flash)
+ return ERR_PTR(-ENOMEM);
+
+ sd = &v4l2_flash->sd;
+ v4l2_flash->fled_cdev = fled_cdev;
+ v4l2_flash->ops = ops;
+ sd->dev = led_cdev->dev;
+ v4l2_subdev_init(sd, &v4l2_flash_subdev_ops);
+ sd->internal_ops = &v4l2_flash_subdev_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ snprintf(sd->name, sizeof(sd->name), led_cdev->name);
strlcpy() or snprintf(sd->name, sizeof(), "%s", led_cdev->name).
I think that strlcpy will fit here best.
+
+ ret = v4l2_flash_init_controls(v4l2_flash, config);
+ if (ret < 0)
+ goto err_init_controls;
+
+ ret = media_entity_init(&sd->entity, 0, NULL, 0);
+ if (ret < 0)
+ goto err_init_entity;
+
+ sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret < 0)
+ goto err_init_entity;
+
+ return v4l2_flash;
+
+err_init_entity:
+ media_entity_cleanup(&sd->entity);
media_entity_cleanup() can be called on an uninitialised entity (as long as
it's zeroed). So you could simplity this a little. Up to you.
+err_init_controls:
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ kfree(v4l2_flash);
+
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(v4l2_flash_init);
+
+void v4l2_flash_release(struct v4l2_flash *v4l2_flash)
+{
+ struct v4l2_subdev *sd = &v4l2_flash->sd;
+
+ if (!v4l2_flash)
+ return;
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ kfree(v4l2_flash);
+}
+EXPORT_SYMBOL_GPL(v4l2_flash_release);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("V4L2 Flash sub-device helpers");
+MODULE_LICENSE("GPL v2");
diff --git a/include/media/v4l2-flash.h b/include/media/v4l2-flash.h
new file mode 100644
index 0000000..404b5a8
--- /dev/null
+++ b/include/media/v4l2-flash.h
@@ -0,0 +1,139 @@
+/*
+ * V4L2 Flash LED sub-device registration helpers.
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd
+ * Author: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation."
There's an unbalanced quote here. Is that intended? Same in the .c file.
This is unintended, to be removed.
+ */
+
+#ifndef _V4L2_FLASH_H
+#define _V4L2_FLASH_H
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
Do you need all the above headers here?
Actually no - only media/v4l2-ctrls.h nad media/v4l2-subdev.h are
required. I will fix this.
+
+struct led_classdev_flash;
+struct led_classdev;
+struct v4l2_flash;
+enum led_brightness;
+
+enum ctrl_init_data_id {
+ LED_MODE,
+ TORCH_INTENSITY,
+ INDICATOR_INTENSITY,
+ STROBE_SOURCE,
+ FLASH_STROBE,
+ STROBE_STOP,
+ STROBE_STATUS,
I think it'd be good to say e.g. in a comment here which values are still
applicable to the struct v4l2_flash field ctrls.
OK.
+ FLASH_TIMEOUT,
+ FLASH_INTENSITY,
+ FLASH_FAULT,
+ SYNC_STROBE,
+ NUM_FLASH_CTRLS,
+};
+
+/*
+ * struct v4l2_flash_ctrl_data - flash control initialization data -
+ * filled basing on the features declared
+ * by the LED Flash class driver
+ * @config: initialization data for a control
+ * @supported: indicates whether a control is supported
+ * by the LED Flash class driver
+ */
+struct v4l2_flash_ctrl_data {
+ struct v4l2_ctrl_config config;
+ bool supported;
Every control has an id, right? Could you use that one instead of
"supported"?
OK.
+};
+
+struct v4l2_flash_ops {
+ /* setup strobing the flash by hardware pin state assertion */
+ int (*external_strobe_set)(struct v4l2_flash *v4l2_flash,
+ bool enable);
+};
+
+/**
+ * struct v4l2_flash_ctrl_config - V4L2 Flash controls initialization data
+ * @intensity: constraints for the led in a non-flash mode
+ * @flash_intensity: V4L2_CID_FLASH_INTENSITY settings constraints
+ * @flash_timeout: V4L2_CID_FLASH_TIMEOUT constraints
+ * @flash_faults: possible flash faults
+ * @has_external_strobe: external strobe capability
+ * @indicator_led: signifies that a led is of indicator type
+ */
+struct v4l2_flash_ctrl_config {
+ struct v4l2_ctrl_config intensity;
+ struct v4l2_ctrl_config flash_intensity;
+ struct v4l2_ctrl_config flash_timeout;
+ u32 flash_faults;
+ bool has_external_strobe:1;
+ bool indicator_led:1;
+};
+
+/**
+ * struct v4l2_flash - Flash sub-device context
+ * @fled_cdev: LED Flash Class device controlled by this sub-device
+ * @ops: V4L2 specific flash ops
+ * @sd: V4L2 sub-device
+ * @hdl: flash controls handler
+ * @ctrls: array of pointers to controls, whose values define
+ * the sub-device state
+ * @sync_strobe_menu leds available for flash strobe synchronization
+ */
+struct v4l2_flash {
+ struct led_classdev_flash *fled_cdev;
+ const struct v4l2_flash_ops *ops;
+
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_ctrl *ctrls[STROBE_SOURCE + 1];
+ char **sync_strobe_menu;
+};
+
+static inline struct v4l2_flash *v4l2_subdev_to_v4l2_flash(
+ struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct v4l2_flash, sd);
+}
+
+static inline struct v4l2_flash *v4l2_ctrl_to_v4l2_flash(struct v4l2_ctrl *c)
+{
+ return container_of(c->handler, struct v4l2_flash, hdl);
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+/**
+ * v4l2_flash_init - initialize V4L2 flash led sub-device
+ * @fled_cdev: the LED Flash Class device to wrap
+ * @flash_ops: V4L2 Flash device ops
+ * @config: initialization data for V4L2 Flash controls
+ *
+ * Create V4L2 subdev wrapping given LED subsystem device.
+ *
+ * Returns: A valid pointer, or, when an error occurs, the return
+ * value is encoded using ERR_PTR(). Use IS_ERR() to check and
+ * PTR_ERR() to obtain the numeric return value.
+ */
+struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
+ const struct v4l2_flash_ops *ops,
+ struct v4l2_flash_ctrl_config *config);
+
+/**
+ * v4l2_flash_release - release V4L2 Flash sub-device
+ * @flash: the V4L2 Flash device to release
+ *
+ * Release V4L2 flash led subdev.
+ */
+void v4l2_flash_release(struct v4l2_flash *v4l2_flash);
+
+#else
+#define v4l2_flash_init(fled_cdev, ops, config) (NULL)
+#define v4l2_flash_release(v4l2_flash)
+#endif /* CONFIG_V4L2_FLASH_LED_CLASS */
+
+#endif /* _V4L2_FLASH_H */
--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/