Re: [PATCH] sb_edac: Fix detection on SNB machines

[Borislav Petkov]

On Sun, Feb 08, 2015 at 07:19:16PM +0100, Borislav Petkov wrote:
> On Sun, Feb 08, 2015 at 08:54:06AM -0800, Andy Lutomirski wrote:
> > If there isn't an obvious fix, I'd be okay with reverting, too.  The
> 
> I think the obvious fix is this:

Yes, it is, of course. If no one objects, I'll send it to Linus after
3.20-rc1 is out.

---
From: Borislav Petkov <bp@xxxxxxx>
Subject: [PATCH] sb_edac: Fix detection on SNB machines

d0585cd815fa ("sb_edac: Claim a different PCI device") changed the
probing of sb_edac to look for PCI device 0x3ca0:

3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
00: 86 80 a0 3c 00 00 00 00 07 00 80 08 00 00 80 00
...

but we're matching for 0x3ca8, i.e. PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA
in sbridge_probe() therefore the probing fails.

Changing it to probe for 0x3ca0 (PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0),
.i.e., the 14.0 device, fixes the issue and driver loads successfully
again:

[ 2449.013120] EDAC DEBUG: sbridge_init:
[ 2449.017029] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.022368] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca0
[ 2449.028498] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.033768] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 2449.039028] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca8
[ 2449.045155] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
...

Add a debug printk while at it to be able to catch the failure in the
future and dump driver version on successful load.

Fixes: d0585cd815fa ("sb_edac: Claim a different PCI device")
Cc: stable@xxxxxxxxxxxxxxx # 3.18
Cc: Tony Luck <tony.luck@xxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
---
 drivers/edac/sb_edac.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 63aa6730e89e..1acf57ba4c86 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -2447,7 +2447,7 @@ static int sbridge_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_ibridge_table);
 		type = IVY_BRIDGE;
 		break;
-	case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA:
+	case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0:
 		rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_sbridge_table);
 		type = SANDY_BRIDGE;
 		break;
@@ -2460,8 +2460,11 @@ static int sbridge_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		type = BROADWELL;
 		break;
 	}
-	if (unlikely(rc < 0))
+	if (unlikely(rc < 0)) {
+		edac_dbg(0, "couldn't get all devices for 0x%x\n", pdev->device);
 		goto fail0;
+	}
+
 	mc = 0;
 
 	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
@@ -2474,7 +2477,7 @@ static int sbridge_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			goto fail1;
 	}
 
-	sbridge_printk(KERN_INFO, "Driver loaded.\n");
+	sbridge_printk(KERN_INFO, "%s\n", SBRIDGE_REVISION);
 
 	mutex_unlock(&sbridge_edac_lock);
 	return 0;
-- 
2.2.0.33.gc18b867


-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/