[PATCH 00/18] sync opal.h with firmware

[Stewart Smith]

This patch series takes a careful step-by-step process to sync the
opal.h header file (definition of interface to OPAL firmware) with
opal.h in firmware.

Each patch is designed to be as obvious as possible so that it's
easy for someone else to prove that I haven't messed it up anywhere.

In the process of doing this, I fixed a few things in firmware too,
so this matches skiboot at 4681ed9, which is a little after the most
recent skiboot release (4.1.1).

The biggest change is moving the function prototypes for API calls
out to opal-api.h.

Stewart Smith (18):
  powerpc/powernv: sync OPAL API tokens with skiboot
  powerpc/powernv: synchronize OPAL calls and return codes with
    firmware
  powerpc/powernv:
    s/OPAL_PCI_SET_PHB_CXL_MODE/OPAL_PCI_SET_PHB_CAPI_MODE/ to match
    firmware
  powerpc/powernv: relocate struct opal_sg_entry in opal.h to same
    place it is in firmware
  powerpc/powernv: synchronize opal.h whitespace with firmware
  powerpc/powernv: move OPAL_DUMP_REGION defines in opal.h to same
    place as in firmware opal.h
  powerpc/powernv: make whitespace for OPAL_PM_* defines match firmware
  powerpc/powernv: Move OpalSysparamPerm,OpalMessageType in opal.h to
    match firmware
  powerpc/powernv: match enum OpalMessageType with firmware
  powerpc/powernv: move OPAL API prototypes to opal-api.h
  powerpc/powernv: make whitespace in enum OpalSysparamPerm match
    firmware
  powerpc/powernv: add CAPI and EPOW parts to opal.h
  powerpc/powernv: add remaining missing enums to opal.h
  powerpc/powernv: sync comments and whitespace in opal.h with firmware
  powerpc/powernv: sync #includes in opal.h with firmware
  powerpc/powernv: move SG_ENTRIES_PER_NODE to linux-specific
    opal-api.h
  powerpc/powernv: s/u8/uint8_t/ to match firmware in opal.h
  powerpc/powernv: s/OpalM64EnableAction/OpalM64Action/ and __be64
    annotation

 arch/powerpc/include/asm/opal-api.h                |  244 ++++++++++
 arch/powerpc/include/asm/opal.h                    |  492 +++++++-------------
 arch/powerpc/kernel/prom.c                         |    1 +
 arch/powerpc/platforms/powernv/eeh-ioda.c          |    1 +
 arch/powerpc/platforms/powernv/eeh-powernv.c       |    1 +
 arch/powerpc/platforms/powernv/opal-async.c        |    1 +
 arch/powerpc/platforms/powernv/opal-dump.c         |    1 +
 arch/powerpc/platforms/powernv/opal-elog.c         |    1 +
 arch/powerpc/platforms/powernv/opal-flash.c        |    1 +
 arch/powerpc/platforms/powernv/opal-hmi.c          |    1 +
 arch/powerpc/platforms/powernv/opal-lpc.c          |    1 +
 .../powerpc/platforms/powernv/opal-memory-errors.c |    1 +
 arch/powerpc/platforms/powernv/opal-msglog.c       |    1 +
 arch/powerpc/platforms/powernv/opal-nvram.c        |    1 +
 arch/powerpc/platforms/powernv/opal-rtc.c          |    1 +
 arch/powerpc/platforms/powernv/opal-sensor.c       |    1 +
 arch/powerpc/platforms/powernv/opal-sysparam.c     |    1 +
 arch/powerpc/platforms/powernv/opal-wrappers.S     |    2 +-
 arch/powerpc/platforms/powernv/opal-xscom.c        |    1 +
 arch/powerpc/platforms/powernv/opal.c              |    1 +
 arch/powerpc/platforms/powernv/pci-ioda.c          |    5 +-
 arch/powerpc/platforms/powernv/pci-p5ioc2.c        |    1 +
 arch/powerpc/platforms/powernv/pci.c               |    1 +
 arch/powerpc/platforms/powernv/setup.c             |    1 +
 arch/powerpc/platforms/powernv/smp.c               |    1 +
 arch/powerpc/platforms/powernv/subcore.c           |    1 +
 arch/powerpc/sysdev/xics/ics-opal.c                |    1 +
 drivers/char/ipmi/ipmi_powernv.c                   |    2 +-
 drivers/hwmon/ibmpowernv.c                         |    1 +
 drivers/i2c/busses/i2c-opal.c                      |    1 +
 drivers/rtc/rtc-opal.c                             |    1 +
 drivers/tty/hvc/hvc_opal.c                         |    1 +
 32 files changed, 450 insertions(+), 322 deletions(-)
 create mode 100644 arch/powerpc/include/asm/opal-api.h

-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/