Re: [PATCH 3/3] arm64: dts: Add dts files for Hisilicon Hi6220 SoC

[Mark Rutland]

On Fri, Feb 06, 2015 at 03:37:52PM +0000, Brent Wang wrote:
> Hello Mark,
> 
> 2015-02-06 18:44 GMT+08:00 Mark Rutland <mark.rutland@xxxxxxx>:
> > On Fri, Feb 06, 2015 at 08:42:22AM +0000, Brent Wang wrote:
> >> Hello Mark,
> >>
> >> 2015-02-06 3:30 GMT+08:00 Mark Rutland <mark.rutland@xxxxxxx>:
> >> > On Thu, Feb 05, 2015 at 09:24:37AM +0000, Bintian Wang wrote:
> >> >> Add initial dtsi file to support Hisilicon Hi6220 SoC with
> >> >> support of Octal core CPUs in two clusters and each cluster
> >> >> has quard Cortex-A53.
> >> >>
> >> >> We now use the "spin-table" method for SMP, and it will be
> >> >> changed to PSCI later.
> >> >
> >> > If that's the case, please don't place the enable-method and related
> >> > properties in this file. Get your bootloader to add the appropriate
> >> > properties for its boot protocol.
> >> >
> >> > When is PSCI likely to appear?
> >> PSCI is under development.
> >
> > Sure. Do you have an estimate as to when it will appear?
> Another team will do the job, I can not give my estimation now.

Ok.

> > What are you using for your PSCI implementation? The ARM Trusted
> > Firmware?
> Yes, ATF.
> >
> > How are you testing it?
> I think cpu hotplug can test it.
> 
> >
> >> > Are we certain of the split between components the PSCI implementation
> >> > must touch and those the kernel must touch?
> >> >
> >> >> Also add dts file to support HiKey development board which
> >> >> based on Hi6220 SoC and document the devicetree bindings.
> >> >>
> >> >> These dts files will be changed later and more nodes will be
> >> >> added to describe other devices.
> >> >
> >> > How is this going to be changed other than the addition of nodes?
> >> >
> >> > Will this DTB continue to work in future? Or do you intend to make
> >> > changes that will break support?
> >> My original idea is: use spin-table for SMP now, when firmware is OK to
> >> support PSCI, we submit another patch to replace the spin-table with PSCI.
> >
> > For any users who have not updated their FW, this will break booting.
> >
> > This is why I suggest having hte bootloader/FW fill this in as it should
> > know what enable-method the FW supports.
> >
> >> If DTB should continue to work in the future, we really need to remove
> >> the spin-table
> >> from current dts file, how about just enable one core now?
> >>
> >> Which one do you favor or any other suggestion?
> >
> > If spin-table is just for testing while you await PSCI, drop spin-table
> > from the dts for now.
> So, just booting one core may be the right choice now, right?

Without an enable-method for secondary CPUs, that will be all that's
possible. If your FW/bootlaoder injects the appropriate enable-method,
then you could gain spin-table based SMP bringup while awaiting PSCI,
without there being a DTB compatibility issue.

[...]

> >> >> +             pm_ctrl: pm_ctrl {
> >> >> +                     compatible = "hisilicon,pmctrl", "syscon";
> >> >> +                     #address-cells = <1>;
> >> >> +                     #size-cells = <1>;
> >> >> +                     reg = <0x0 0xf7032000 0x0 0x1000>;
> >> >> +                     ranges = <0 0x0 0xf7032000 0x1000>;
> >> >> +
> >> >> +                     clock_power: clock3@0 {
> >> >> +                             compatible = "hisilicon,hi6220-clock-power";
> >> >> +                             reg = <0 0x1000>;
> >> >> +                             #clock-cells = <1>;
> >> >> +                     };
> >> >> +             };
> >> >
> >> > I really doesn't see the point in having a sub-device that covers the
> >> > entirely of the register space of the containing node, and that being
> >> > the case I am extremely concerned that the containers are marked as
> >> > syscon compatible.
> >> The SoC clocks are designed and placed under different system controllers,
> >> so I define corresponding nodes under different controllers for clock operation.
> >
> > What I'm concerned wit hhere is that the pm_ctrl node and the clock3@0
> > sub-node have the _exact_ same register space.
> >
> > Given this should mean that the clock3@0 node owns that register space,
> > having the container node export this as syscon does not make sense. And
> > the split between pm_ctrl and clock3@) doesn't seem to make sense given
> > they cover the same space.
> I understand your worry and will find the max offset of those clocks
> under this controller.
> 
> >
> > As I asked before, why is pm_ctrl marked as a syscon, and what's the
> > point of the separate sub-node?
> There is no big difference between pm_ctrl and other controller,  they
> are all designed as
> the base address to control some functions of other modules (certainly
> include some clock gates).

Are they just different instances of the same IP block, or are there
fundamental differences between them?

> Maybe only one node is enough, not one node plus one sub-node ?

At least in the case above, I cannot see a reason to have more than a
single node without a child.

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/