[PATCH v6 00/15] Tegra124 EMC (external memory controller) support

From: Tomeu Vizoso
Date: Thu Feb 12 2015 - 09:08:09 EST


Hello,

this v6 mainly contains a rebase on latest linux-next.

There's an outstanding issue with frequencies lower than 102MHz, as the MC IP
complains of EMEM arbitration errors when at those frequencies. Any suggestions
welcome. The downstream kernels that I have seen ignore those errors, but mainline prints a message out, so it's actually visible even if everything else appears to keep working.

So far it has been tested only on a Jetson TK1.

Patch 1: Removes the old EMC clock, that was unused and not functional

Patch 2: Documents bindings for the new long-ram-code property

Patch 3: Adds API for reading the ram code

Patches 4 to 7: Document OF additions

Patch 8: Adds EMC node to Tegra124 DT

Patch 9: Adds timings for Jetson TK1 board

Patch 10: Adds functions to the MC driver so the EMC driver can stay within its
own registers

Patch 11: Adds the actual EMC driver, making use of the new MC API

Patch 12: Adds EMC clock driver, making use of API provided by the EMC driver

Patch 13: Adds debugfs entry for getting and setting the EMC rate

Patch 14: On Tegra124, have the EMC clock be the parent of the MC clock

http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=emc-v6

Regards,

Tomeu

Mikko Perttunen (9):
clk: tegra124: Remove old emc clock
soc/tegra: Add ram code reader helper
of: Add Tegra124 EMC bindings
ARM: tegra: Add EMC to Tegra124 device tree
ARM: tegra: Add EMC timings to Jetson TK1 device tree
memory: tegra: Add API needed by the EMC driver
memory: tegra: Add EMC (external memory controller) driver
clk: tegra: Add EMC clock driver
memory: tegra: Add debugfs entry for getting and setting the EMC rate

Tomeu Vizoso (6):
of: Document long-ram-code property in nvidia,tegra20-apbmisc
of: document new emc-timings subnode in nvidia,tegra124-car
of: Document timings subnode of nvidia,tegra-mc
of: document external-memory-controller property in tegra124-car
clk: Expose clk_hw_reparent to providers
clk: tegra: Set the EMC clock as the parent of the MC clock

.../bindings/clock/nvidia,tegra124-car.txt | 44 +-
.../memory-controllers/nvidia,tegra-mc.txt | 84 +-
.../bindings/memory-controllers/tegra-emc.txt | 379 +++
.../bindings/misc/nvidia,tegra20-apbmisc.txt | 2 +
arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi | 2469 ++++++++++++++++++++
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +
arch/arm/boot/dts/tegra124.dtsi | 8 +
drivers/clk/clk.c | 8 +
drivers/clk/tegra/Makefile | 2 +-
drivers/clk/tegra/clk-emc.c | 528 +++++
drivers/clk/tegra/clk-tegra124.c | 18 +-
drivers/clk/tegra/clk.h | 3 +
drivers/memory/tegra/Kconfig | 11 +
drivers/memory/tegra/Makefile | 2 +
drivers/memory/tegra/mc.c | 136 ++
drivers/memory/tegra/tegra124-emc.c | 1164 +++++++++
drivers/memory/tegra/tegra124.c | 44 +
drivers/soc/tegra/fuse/tegra-apbmisc.c | 19 +
include/linux/clk-provider.h | 1 +
include/soc/tegra/emc.h | 19 +
include/soc/tegra/fuse.h | 1 +
include/soc/tegra/mc.h | 14 +-
22 files changed, 4939 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
create mode 100644 arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
create mode 100644 drivers/clk/tegra/clk-emc.c
create mode 100644 drivers/memory/tegra/tegra124-emc.c
create mode 100644 include/soc/tegra/emc.h

--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/