Re: [PATCH 1/2] power: reset: Add support for NI Ettus Research USRP E3x0 soft-poweroff.

[Paul Bolle]

One nit below.

On Thu, 2015-02-12 at 17:14 -0800, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer@xxxxxxxxx>
> ---
>  .../bindings/power/reset/e3x0-poweroff.txt         | 16 ++++
>  drivers/power/reset/Kconfig                        | 10 +++
>  drivers/power/reset/Makefile                       |  1 +
>  drivers/power/reset/e3x0-poweroff.c                | 94 ++++++++++++++++++++++
>  4 files changed, 121 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/power/reset/e3x0-poweroff.txt b/Documentation/devicetree/bindings/power/reset/e3x0-poweroff.txt
> new file mode 100644
> index 0000000..df19998
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/e3x0-poweroff.txt
> @@ -0,0 +1,16 @@
> +National Instruments Ettus Research USRP E3x0 poweroff driver
> +
> +This module is part of the NI Ettus Research USRP E3x0 SDR.
> +
> +Required properties:
> +- compatible: should be one of the following
> +  - "ettus,e3x0-poweroff": For devices such as the NI Ettus Research USRP E3x0
> +- reg: The registers to write to in order to trigger the poweroff.
> +
> +Note: Addresses may vary depending on the FPGA configuration
> +
> +Example:
> +	poweroff0: poweroff@40300000 {
> +		compatible = "ettus,e3x0-poweroff";
> +		reg = <0x40300000 0x04>;
> +	};
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 27f6646..e45029f 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -48,6 +48,16 @@ config POWER_RESET_BRCMSTB
>  	  Say Y here if you have a Broadcom STB board and you wish
>  	  to have restart support.
>  
> +config POWER_RESET_E3X0
> +	tristate "NI Ettus Research USRP E3x0 soft poweroff driver."
> +	default n
> +	help
> +	  Say Y here to enable support for the NI Ettus Research
> +	  USRP E3x0 soft poweroff.
> +
> +	  To compile this driver as a module, chose M here: the
> +	  module will be called e3x0-reset.

                                  e3x0-poweroff

> +
>  config POWER_RESET_GPIO
>  	bool "GPIO power-off driver"
>  	depends on OF_GPIO
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 11de15b..eef50e9a 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
>  obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
>  obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
>  obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> +obj-$(CONFIG_POWER_RESET_E3X0) += e3x0-poweroff.o
>  obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
>  obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
>  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o


Paul Bolle

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/