Re: [PATCH] led/led-class: Handle LEDs with the same name

[Bryan Wu]

On Tue, Feb 17, 2015 at 2:54 PM, Ricardo Ribalda Delgado
<ricardo.ribalda@xxxxxxxxx> wrote:
> Hello Bryan
>
> On Tue, Feb 17, 2015 at 11:34 PM, Bryan Wu <cooloney@xxxxxxxxx> wrote:
>>
>> Can you show me your device tree code for overlaying describing a camera?
>>
>
> The camera is composed by fpga modules. The fpga is attached via pcie
> to the host.
>
> The whole dt would be too long.
>
> Here you can see the relevant parts
>
> &axi1 {
>
>
> packer_0: packer_0{
> #address-cells = <1>;
> #size-cells = <1>;
>     compatible = "qtec,axi_matrix_packer-1.00.a";
> reg = < 0x30060000 0x10000 >;
> qtec,serial_number = "Invalid Head Serial Number";
> qtec,bitstream_version = < 0 >;
> qtec,head_i2c_address = < 0 >;
> qtec,cdma = <&cdma_0>;
> qtec,desc_mem= <&cdma_desc_mem>;
> qtec,pcie_bridge= <&pcie_bridge_0>;
> qtec,aperture-addr= < 0  4 >;
> qtec,circular_buffer= <&video_mem>;
> qtec,white_balance= <&white_0>;
> qtec,sensor = <&ccd_fg_0>;
> qtec,pll = < &pll_0 >;
> qtec,xform = <&xform_0>;
> qtec,testgen = <&testgen_0>;
> qtec,encoder = <&encoder_0>;
> interrupt-parent = <&xps_intc_0>;
> interrupts = < 5 2 >;
> };
>
> gpio_0: gpio_0 {
> #gpio-cells = <2>;
> compatible = "xlnx,xps-gpio-1.00.a";
> reg = < 0x30040000 010000 >;
> xlnx,dout-default = < 0xffffffff >;
> xlnx,tri-default =  < 0xfffffff8 >;
> xlnx,gpio-width = < 5 >;
> };
>
>
> /*Leds*/
> leds {
> reg = < 0x30040000 010000 >;
> compatible = "gpio-leds";
> red {

So why not use name "red0" and name another one "red1"? since you have
multiple different red leds here any way.

-Bryan

> gpios = <&gpio_0 0 0>;
> linux,default-trigger = "drop-qt5023_video0";
> };
> yellow {
> gpios = <&gpio_0 1 0>;
> linux,default-trigger = "packer-qt5023_video0";
> };
> green {
> gpios = <&gpio_0 2 0>;
> linux,default-trigger = "heartbeat";
> };
> };
>
>
> If there are multiple cameras, then there will be multiple red, yellow
> and green leds, throwing out the error I copied earlier.
>
>
> Thanks!
>
> --
> Ricardo Ribalda
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/