[PATCH v2 4/4] clk: dt: Introduce always-on clock domain documentation

From: Lee Jones
Date: Wed Feb 18 2015 - 11:15:52 EST


Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
.../devicetree/bindings/clock/clk-domain.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/clk-domain.txt

diff --git a/Documentation/devicetree/bindings/clock/clk-domain.txt b/Documentation/devicetree/bindings/clock/clk-domain.txt
new file mode 100644
index 0000000..b86772f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-domain.txt
@@ -0,0 +1,35 @@
+Always-on Clock Domain
+
+Some hardware is contains bunches of clocks which must never be
+turned off. If drivers a) fail to obtain a reference to any of
+these or b) give up a previously obtained reference during suspend,
+the common clk framework will attempt to disable them and the
+hardware can fail irrecoverably. Usually, the only way to recover
+from these failures is to restart.
+
+To avoid either of these two scenarios from catastrophically
+disabling an otherwise perfectly healthy running system, we have
+implemented a clock domain where clocks are consumed and references
+are taken, thus preventing them from being shut down by the
+framework.
+
+We use the generic clock bindings found in:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Must be "always-on-clk-domain"
+
+Example:
+
+clk-domain {
+ compatible = "always-on-clk-domain";
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_c0_flexgen CLK_MMC_1>,
+ <&clk_s_c0_flexgen CLK_ICN_SBC>,
+ <&clk_s_c0_flexgen CLK_ICN_LMI>,
+ <&clk_s_c0_flexgen CLK_ICN_CPU>,
+ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+ <&clk_s_a0_flexgen CLK_IC_LMI0>,
+ <&clk_m_a9>;
+};
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/