Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
From: addy ke
Date: Thu Feb 19 2015 - 05:30:56 EST
Sorry for late reply.
On 2015/2/16 07:28, Alim Akhtar wrote:
> Hi Addy,
> On Sat, Feb 14, 2015 at 11:47 AM, Addy Ke <addy.ke@xxxxxxxxxxxxxx> wrote:
>> As show in mmc_power_up(), in MMC_POWER_UP state, the voltage isn't
>> stable and we may get 'data busy' which can't be cleaned by resetting
>> all blocks. So we should not send command to update clock in this state.
>> Signed-off-by: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
>> drivers/mmc/host/dw_mmc.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 4d2e3c2..3472f9b 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -1102,7 +1102,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>> drv_data->set_ios(slot->host, ios);
>> /* Slot specific timing and width adjustment */
>> - dw_mci_setup_bus(slot, false);
>> + if (ios->power_mode != MMC_POWER_UP)
>> + dw_mci_setup_bus(slot, false);
> This looks a HACK to me.
> If stabilizing host voltage regulator is the problem, can you try out
> below patch, and see if this resolve your issue?
I have test by:
for i in $(seq 1 10000); do
echo "========================" $i
echo ff0c0000.dwmmc > unbind
echo ff0c0000.dwmmc > bind
There is no error.
I think this patch can resolve my issue, thank you.
Do you send this patch upstream, or can I put it in my patch list?
> [PATCH] mmc: dw_mmc: Wait for host voltage regulator to be stable
> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> drivers/mmc/host/dw_mmc.c | 3 +++
> 1 file changed, 3 insertions(+)
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 4d2e3c2..dc10fbb 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1202,6 +1202,9 @@ static int dw_mci_switch_voltage(struct mmc_host
> *mmc, struct mmc_ios *ios)
> mci_writel(host, UHS_REG, uhs);
> + /* wait for 5ms so that host voltage regulator is stable */
> + usleep_range(5000, 5500);
> return 0;
>> if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
>> slot->host->state = STATE_IDLE;
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/