[PATCH v3 1/2] kprobes/x86: Use 5-byte NOP when the code might be modified by ftrace

[Petr Mladek]

can_probe() checks if the given address points to the beginning of
an instruction. It analyzes all the instructions from the beginning
of the function until the given address. The code might be modified
by another Kprobe. In this case, the current code is read into a buffer,
int3 breakpoint is replaced by the saved opcode in the buffer, and
can_probe() analyzes the buffer instead.

There is a bug that __recover_probed_insn() tries to restore
the original code even for Kprobes using the ftrace framework.
But in this case, the opcode is not stored. See the difference
between arch_prepare_kprobe() and arch_prepare_kprobe_ftrace().
The opcode is stored by arch_copy_kprobe() only from
arch_prepare_kprobe().

This patch makes Kprobe to use the ideal 5-byte NOP when the code
can be modified by ftrace. It is the original instruction, see
ftrace_make_nop() and ftrace_nop_replace().

Note that we always need to use the NOP for ftrace locations. Kprobes
do not block ftrace and the instruction might get modified at anytime.
It might even be in an inconsistent state because it is modified step
by step using the int3 breakpoint.

The patch also fixes indentation of the touched comment.

Note that I found this problem when playing with Kprobes. I did it
on x86_64 with gcc-4.8.3 that supported -mfentry. I modified
samples/kprobes/kprobe_example.c and added offset 5 to put
the probe right after the fentry area:

 static struct kprobe kp = {
 	.symbol_name	= "do_fork",
+	.offset = 5,
 };

Then I was able to load kprobe_example before jprobe_example
but not the other way around:

$> modprobe jprobe_example
$> modprobe kprobe_example
modprobe: ERROR: could not insert 'kprobe_example': Invalid or incomplete multibyte or wide character

It did not make much sense and debugging pointed to the bug
described above.

Signed-off-by: Petr Mladek <pmladek@xxxxxxx>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@xxxxxxxxxxx>
---
 arch/x86/kernel/kprobes/core.c | 42 ++++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 98f654d466e5..70b9b0c12682 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -223,27 +223,41 @@ static unsigned long
 __recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr)
 {
 	struct kprobe *kp;
+	unsigned long faddr;
 
 	kp = get_kprobe((void *)addr);
-	/* There is no probe, return original address */
-	if (!kp)
+	faddr = ftrace_location(addr);
+	/*
+	 * Use the current code if it is not modified by Kprobe
+	 * and it cannot be modified by ftrace.
+	 */
+	if (!kp && !faddr)
 		return addr;
 
 	/*
-	 *  Basically, kp->ainsn.insn has an original instruction.
-	 *  However, RIP-relative instruction can not do single-stepping
-	 *  at different place, __copy_instruction() tweaks the displacement of
-	 *  that instruction. In that case, we can't recover the instruction
-	 *  from the kp->ainsn.insn.
+	 * Basically, kp->ainsn.insn has an original instruction.
+	 * However, RIP-relative instruction can not do single-stepping
+	 * at different place, __copy_instruction() tweaks the displacement of
+	 * that instruction. In that case, we can't recover the instruction
+	 * from the kp->ainsn.insn.
 	 *
-	 *  On the other hand, kp->opcode has a copy of the first byte of
-	 *  the probed instruction, which is overwritten by int3. And
-	 *  the instruction at kp->addr is not modified by kprobes except
-	 *  for the first byte, we can recover the original instruction
-	 *  from it and kp->opcode.
+	 * On the other hand, in case on normal Kprobe, kp->opcode has a copy
+	 * of the first byte of the probed instruction, which is overwritten
+	 * by int3. And the instruction at kp->addr is not modified by kprobes
+	 * except for the first byte, we can recover the original instruction
+	 * from it and kp->opcode.
+	 *
+	 * In case of Kprobes using ftrace, we do not have a copy of
+	 * the original instruction. In fact, the ftrace location might
+	 * be modified at anytime and even could be in an inconsistent state.
+	 * Fortunately, we know that the original code is the ideal 5-byte
+	 * long NOP.
 	 */
-	memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
-	buf[0] = kp->opcode;
+	memcpy(buf, (void *)addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+	if (faddr)
+		memcpy(buf, ideal_nops[NOP_ATOMIC5], 5);
+	else
+		buf[0] = kp->opcode;
 	return (unsigned long)buf;
 }
 
-- 
1.8.5.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/