Re: [PATCH 1/1] drivers: spi: ti-qspi: wait for busy bit clear before data write/read

[Mark Brown]

On Wed, Feb 18, 2015 at 12:33:51AM +0530, Mugunthan V N wrote:
> Data corruption is seen while reading/writing large data from/to qspi
> device because the data register is over written or read before data
> is ready which is denoted by busy bit in status register. SO adding
> a busy bit check before writing/reading data to/from qspi device.

Applied, thanks.

Attachment: signature.asc
Description: Digital signature