[PATCH] Staging: fbtft: fix space errors

[Matteo Semenzato]

From: Matteo Semenzato <mattew8898@xxxxxxxxx>

This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespace

Signed-off-by: Matteo Semenzato <mattew8898@xxxxxxxxx>
---
 drivers/staging/fbtft/fb_upd161704.c | 90 ++++++++++++++++++------------------
 1 file changed, 45 insertions(+), 45 deletions(-)

diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c
index fff57b3..176c210 100644
--- a/drivers/staging/fbtft/fb_upd161704.c
+++ b/drivers/staging/fbtft/fb_upd161704.c
@@ -47,84 +47,84 @@ static int init_display(struct fbtft_par *par)
 	/* Initialization sequence from Lib_UTFT */
 
 	/* register reset */
-	write_reg(par, 0x0003,0x0001);	/* Soft reset */
+	write_reg(par, 0x0003, 0x0001);	/* Soft reset */
 
 	/* oscillator start */
-	write_reg(par, 0x003A,0x0001);	/*Oscillator 0: stop, 1: operation */
+	write_reg(par, 0x003A, 0x0001);	/*Oscillator 0: stop, 1: operation */
 	udelay(100);
 
 	/* y-setting */
-	write_reg(par, 0x0024,0x007B);	/* amplitude setting */
+	write_reg(par, 0x0024, 0x007B);	/* amplitude setting */
 	udelay(10);
-	write_reg(par, 0x0025,0x003B);	/* amplitude setting */
-	write_reg(par, 0x0026,0x0034);	/* amplitude setting */
+	write_reg(par, 0x0025, 0x003B);	/* amplitude setting */
+	write_reg(par, 0x0026, 0x0034);	/* amplitude setting */
 	udelay(10);
-	write_reg(par, 0x0027,0x0004);	/* amplitude setting */
-	write_reg(par, 0x0052,0x0025);	/* circuit setting 1 */
+	write_reg(par, 0x0027, 0x0004);	/* amplitude setting */
+	write_reg(par, 0x0052, 0x0025);	/* circuit setting 1 */
 	udelay(10);
-	write_reg(par, 0x0053,0x0033);	/* circuit setting 2 */
-	write_reg(par, 0x0061,0x001C);	/* adjustment V10 positive polarity */
+	write_reg(par, 0x0053, 0x0033);	/* circuit setting 2 */
+	write_reg(par, 0x0061, 0x001C);	/* adjustment V10 positive polarity */
 	udelay(10);
-	write_reg(par, 0x0062,0x002C);	/* adjustment V9 negative polarity */
-	write_reg(par, 0x0063,0x0022);	/* adjustment V34 positive polarity */
+	write_reg(par, 0x0062, 0x002C);	/* adjustment V9 negative polarity */
+	write_reg(par, 0x0063, 0x0022);	/* adjustment V34 positive polarity */
 	udelay(10);
-	write_reg(par, 0x0064,0x0027);	/* adjustment V31 negative polarity */
+	write_reg(par, 0x0064, 0x0027);	/* adjustment V31 negative polarity */
 	udelay(10);
-	write_reg(par, 0x0065,0x0014);	/* adjustment V61 negative polarity */
+	write_reg(par, 0x0065, 0x0014);	/* adjustment V61 negative polarity */
 	udelay(10);
-	write_reg(par, 0x0066,0x0010);	/* adjustment V61 negative polarity */
-	
+	write_reg(par, 0x0066, 0x0010);	/* adjustment V61 negative polarity */
+
 	/* Basical clock for 1 line (BASECOUNT[7:0]) number specified */
-	write_reg(par, 0x002E,0x002D);
-	
+	write_reg(par, 0x002E, 0x002D);
+
 	/* Power supply setting */
-	write_reg(par, 0x0019,0x0000);	/* DC/DC output setting */
+	write_reg(par, 0x0019, 0x0000);	/* DC/DC output setting */
 	udelay(200);
-	write_reg(par, 0x001A,0x1000);	/* DC/DC frequency setting */
-	write_reg(par, 0x001B,0x0023);	/* DC/DC rising setting */
-	write_reg(par, 0x001C,0x0C01);	/* Regulator voltage setting */
-	write_reg(par, 0x001D,0x0000);	/* Regulator current setting */
-	write_reg(par, 0x001E,0x0009);	/* VCOM output setting */
-	write_reg(par, 0x001F,0x0035);	/* VCOM amplitude setting */
-	write_reg(par, 0x0020,0x0015);	/* VCOMM cencter setting */
-	write_reg(par, 0x0018,0x1E7B);	/* DC/DC operation setting */
+	write_reg(par, 0x001A, 0x1000);	/* DC/DC frequency setting */
+	write_reg(par, 0x001B, 0x0023);	/* DC/DC rising setting */
+	write_reg(par, 0x001C, 0x0C01);	/* Regulator voltage setting */
+	write_reg(par, 0x001D, 0x0000);	/* Regulator current setting */
+	write_reg(par, 0x001E, 0x0009);	/* VCOM output setting */
+	write_reg(par, 0x001F, 0x0035);	/* VCOM amplitude setting */
+	write_reg(par, 0x0020, 0x0015);	/* VCOMM cencter setting */
+	write_reg(par, 0x0018, 0x1E7B);	/* DC/DC operation setting */
 
 	/* windows setting */
-	write_reg(par, 0x0008,0x0000);	/* Minimum X address */
-	write_reg(par, 0x0009,0x00EF);	/* Maximum X address */
-	write_reg(par, 0x000a,0x0000);	/* Minimum Y address */
-	write_reg(par, 0x000b,0x013F);	/* Maximum Y address */
+	write_reg(par, 0x0008, 0x0000);	/* Minimum X address */
+	write_reg(par, 0x0009, 0x00EF);	/* Maximum X address */
+	write_reg(par, 0x000a, 0x0000);	/* Minimum Y address */
+	write_reg(par, 0x000b, 0x013F);	/* Maximum Y address */
 
 	/* LCD display area setting */
-	write_reg(par, 0x0029,0x0000);	/* [LCDSIZE]  X MIN. size set */
-	write_reg(par, 0x002A,0x0000);	/* [LCDSIZE]  Y MIN. size set */
-	write_reg(par, 0x002B,0x00EF);	/* [LCDSIZE]  X MAX. size set */
-	write_reg(par, 0x002C,0x013F);	/* [LCDSIZE]  Y MAX. size set */
+	write_reg(par, 0x0029, 0x0000);	/* [LCDSIZE]  X MIN. size set */
+	write_reg(par, 0x002A, 0x0000);	/* [LCDSIZE]  Y MIN. size set */
+	write_reg(par, 0x002B, 0x00EF);	/* [LCDSIZE]  X MAX. size set */
+	write_reg(par, 0x002C, 0x013F);	/* [LCDSIZE]  Y MAX. size set */
 
 	/* Gate scan setting */
-	write_reg(par, 0x0032,0x0002);
-	
+	write_reg(par, 0x0032, 0x0002);
+
 	/* n line inversion line number */
-	write_reg(par, 0x0033,0x0000);
+	write_reg(par, 0x0033, 0x0000);
 
 	/* Line inversion/frame inversion/interlace setting */
-	write_reg(par, 0x0037,0x0000);
-	
+	write_reg(par, 0x0037, 0x0000);
+
 	/* Gate scan operation setting register */
-	write_reg(par, 0x003B,0x0001);
-	
+	write_reg(par, 0x003B, 0x0001);
+
 	/* Color mode */
 	/*GS = 0: 260-k color (64 gray scale), GS = 1: 8 color (2 gray scale) */
-	write_reg(par, 0x0004,0x0000);
+	write_reg(par, 0x0004, 0x0000);
 
 	/* RAM control register */
-	write_reg(par, 0x0005,0x0000);	/*Window access 00:Normal, 10:Window */
+	write_reg(par, 0x0005, 0x0000);	/*Window access 00:Normal, 10:Window */
 
 	/* Display setting register 2 */
-	write_reg(par, 0x0001,0x0000);
+	write_reg(par, 0x0001, 0x0000);
 
 	/* display setting */
-	write_reg(par, 0x0000,0x0000);	/* display on */
+	write_reg(par, 0x0000, 0x0000);	/* display on */
 
 	return 0;
 }
-- 
2.3.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/