[GIT PULL] timer fixes

[Ingo Molnar]

Linus,

Please pull the latest timers-urgent-for-linus git tree from:

   git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-urgent-for-linus

   # HEAD: e3eff6fe7d8a877d94f5dbb8fea46b4f8ca4ce5a Merge branch 'clockevents/4.0-rc1' of git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent

Three clockevents/clocksource driver fixes.

 Thanks,

	Ingo

------------------>
Daniel Lezcano (1):
      clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig

Matthias Brugger (1):
      clocksource: mtk: Fix race conditions in probe code

Robert Jarzmik (1):
      clocksource: pxa: Fix section mismatch


 arch/arm/mach-asm9260/Kconfig   |  2 ++
 drivers/clocksource/Kconfig     | 16 +++++-----------
 drivers/clocksource/mtk_timer.c |  9 +++++----
 drivers/clocksource/pxa_timer.c |  2 +-
 4 files changed, 13 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
index 8423be76080e..52241207a82a 100644
--- a/arch/arm/mach-asm9260/Kconfig
+++ b/arch/arm/mach-asm9260/Kconfig
@@ -2,5 +2,7 @@ config MACH_ASM9260
 	bool "Alphascale ASM9260"
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
+	select ASM9260_TIMER
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Alphascale ASM9260 based platform.
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 1c2506f68122..68161f7a07d6 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -63,6 +63,11 @@ config VT8500_TIMER
 config CADENCE_TTC_TIMER
 	bool
 
+config ASM9260_TIMER
+	bool
+	select CLKSRC_MMIO
+	select CLKSRC_OF
+
 config CLKSRC_NOMADIK_MTU
 	bool
 	depends on (ARCH_NOMADIK || ARCH_U8500)
@@ -245,15 +250,4 @@ config CLKSRC_PXA
 	help
 	  This enables OST0 support available on PXA and SA-11x0
 	  platforms.
-
-config ASM9260_TIMER
-	bool "Alphascale ASM9260 timer driver"
-	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_MMIO
-	select CLKSRC_OF
-	default y if MACH_ASM9260
-	help
-	  This enables build of a clocksource and clockevent driver for
-	  the 32-bit System Timer hardware available on a Alphascale ASM9260.
-
 endmenu
diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
index 32a3d25795d3..68ab42356d0e 100644
--- a/drivers/clocksource/mtk_timer.c
+++ b/drivers/clocksource/mtk_timer.c
@@ -224,6 +224,8 @@ static void __init mtk_timer_init(struct device_node *node)
 	}
 	rate = clk_get_rate(clk);
 
+	mtk_timer_global_reset(evt);
+
 	if (request_irq(evt->dev.irq, mtk_timer_interrupt,
 			IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
 		pr_warn("failed to setup irq %d\n", evt->dev.irq);
@@ -232,8 +234,6 @@ static void __init mtk_timer_init(struct device_node *node)
 
 	evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 
-	mtk_timer_global_reset(evt);
-
 	/* Configure clock source */
 	mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN);
 	clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
@@ -241,10 +241,11 @@ static void __init mtk_timer_init(struct device_node *node)
 
 	/* Configure clock event */
 	mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT);
-	mtk_timer_enable_irq(evt, GPT_CLK_EVT);
-
 	clockevents_config_and_register(&evt->dev, rate, 0x3,
 					0xffffffff);
+
+	mtk_timer_enable_irq(evt, GPT_CLK_EVT);
+
 	return;
 
 err_clk_disable:
diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c
index 941f3f344e08..d9438af2bbd6 100644
--- a/drivers/clocksource/pxa_timer.c
+++ b/drivers/clocksource/pxa_timer.c
@@ -163,7 +163,7 @@ static struct irqaction pxa_ost0_irq = {
 	.dev_id		= &ckevt_pxa_osmr0,
 };
 
-static void pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
+static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 {
 	timer_writel(0, OIER);
 	timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/