Re: [PATCH 0/3] Add ktd2692 Flash LED driver

[Ingi Kim]

Hi Jacek

On 2015ë 02ì 27ì 17:42, Jacek Anaszewski wrote:
> Hi Ingi,
> 
> On 02/27/2015 02:01 AM, Ingi Kim wrote:
>> This patch supports KTD2692 flash LED driver
>>
>> Ingi Kim (3):
>>    of: Add vendor prefix for Kinetic technologies
>>    leds: ktd2692: add device tree bindings for ktd2692
>>    leds: Add ktd2692 flash LED driver
>>
>>   .../devicetree/bindings/leds/leds-ktd2692.txt      |   19 ++
>>   .../devicetree/bindings/vendor-prefixes.txt        |    1 +
>>   drivers/leds/Kconfig                               |    8 +
>>   drivers/leds/Makefile                              |    1 +
>>   drivers/leds/leds-ktd2692.c                        |  245 ++++++++++++++++++++
>>   5 files changed, 274 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>>   create mode 100644 drivers/leds/leds-ktd2692.c
>>
> 
> In your device tree binding documentation there is torch-gpio mentioned,
> but you seem not to use it in the driver.
> 
> We have already LED Flash class (/drivers/leds/led-class-flash.c) for
> this type of devices, which handles both torch and flash modes
> (flash_strobe sysfs attribute is provided for strobing the flash).
> 
> The reference drivers using LED Flash class are still pending [1], but I
> think that at least leds-aat1290 driver is almost ready for merging.
> It controls very similar device to yours.
> 
> Another advantage of using LED Flash class is that it has been designed
> to be compatible with Video for Linux 2 subsystem, which will allow for registering LED Flash class devices as a V4L2 sub-devices.
> 
> Adding Sakari.
> 

Ok, I'll check LED Flash class, and add torch-gpio
Thanks,

Adding Seung-woo Kim and Inha Song
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/