Re: [PATCH - v7] of: Move of_dma_configure() to device.c to help re-use

[Murali Karicheri]

On 03/03/2015 03:53 PM, Bjorn Helgaas wrote:
> [+cc linux-pci]
>
> On Tue, Mar 3, 2015 at 11:55 AM, Murali Karicheri<m-karicheri2@xxxxxx>  wrote:
> > On 03/02/2015 10:43 PM, Bjorn Helgaas wrote:
> > > On Mon, Mar 2, 2015 at 3:59 PM, Murali Karicheri<m-karicheri2@xxxxxx>
> > > wrote:
> > > > Move of_dma_configure() to device.c so it can be re-used for PCI devices
> > > > to
> > > > obtain DMA configuration from DT.  Also add a second argument so that for
> > > > PCI, the DT node of root bus host bridge can be used to obtain the DMA
> > > > configuration for the slave PCI device.
> > > >
> > > > Tested-by: Suravee Suthikulpanit<Suravee.Suthikulpanit@xxxxxxx>   (AMD
> > > > Seattle)
> > > > Signed-off-by: Murali Karicheri<m-karicheri2@xxxxxx>
> > > > Signed-off-by: Bjorn Helgaas<bhelgaas@xxxxxxxxxx>
> > > > Reviewed-by: Catalin Marinas<catalin.marinas@xxxxxxx>
> > > > Acked-by: Will Deacon<will.deacon@xxxxxxx>
> > > > CC: Joerg Roedel<joro@xxxxxxxxxx>
> > > > CC: Grant Likely<grant.likely@xxxxxxxxxx>
> > > > CC: Rob Herring<robh+dt@xxxxxxxxxx>
> > > > CC: Russell King<linux@xxxxxxxxxxxxxxxx>
> > > > CC: Arnd Bergmann<arnd@xxxxxxxx>
> > > > ---
> > > >    - Based on the existing patch applied to arm-pci/pci/iommu for pci next
> > > > (Bjorn)
> > > >    - Fixed the build issue reported on ARCH=x86_64
> > >
> > >
> > > Hi Murali,
> > >
> > > Can you please repost the entire series with fixed patches?  It's
> > > easier for me to reapply the whole thing at once than it is to keep
> > > track of and fiddle with individual patches.
> > >
> > > Bjorn
> >
> > Bjorn,
> >
> > Ok. I have just posted v8 of the series including all patches.
>
> Thanks, I put them on a pci/murali-v8 branch for now.  I'm assuming
> you want them to go through my tree.  In the cover letter, you
> mentioned the "arm-pci iommu branch", so if that means you want them
> via an ARM tree instead of mine, just let me know.  I assume the build
> will be clean and I'll rename it back to pci/iommu.

My bad. It should have beem pci/iommu. My remote was named arm-pci and 
hence the confusion. Please apply it to the pci/iommu branch.

Thanks

Murali
> Bjorn


--
Murali Karicheri
Linux Kernel, Texas Instruments
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/