[PATCH 3.18 149/151] x86/efi: Avoid triple faults during EFI mixed mode calls

From: Greg Kroah-Hartman
Date: Wed Mar 04 2015 - 02:12:31 EST

Next message: Greg Kroah-Hartman: "[PATCH 3.18 111/151] vt: provide notifications on selection changes"
Previous message: Tuomas Tynkkynen: "Re: [PATCH v8 15/18] cpufreq: Add cpufreq driver for Tegra124"
In reply to: Greg Kroah-Hartman: "[PATCH 3.18 151/151] x86: pmc-atom: Assign debugfs node as soon as possible"
Next in thread: Greg Kroah-Hartman: "[PATCH 3.18 111/151] vt: provide notifications on selection changes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matt Fleming <matt.fleming@xxxxxxxxx>

commit 96738c69a7fcdbf0d7c9df0c8a27660011e82a7b upstream.

Andy pointed out that if an NMI or MCE is received while we're in the
middle of an EFI mixed mode call a triple fault will occur. This can
happen, for example, when issuing an EFI mixed mode call while running
perf.

The reason for the triple fault is that we execute the mixed mode call
in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers
installed throughout the call.

At Andy's suggestion, stop playing the games we currently do at runtime,
such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We
can simply switch to the __KERNEL32_CS descriptor before invoking
firmware services, and run in compatibility mode. This way, if an
NMI/MCE does occur the kernel IDT handler will execute correctly, since
it'll jump to __KERNEL_CS automatically.

However, this change is only possible post-ExitBootServices(). Before
then the firmware "owns" the machine and expects for its 32-bit IDT
handlers to be left intact to service interrupts, etc.

So, we now need to distinguish between early boot and runtime
invocations of EFI services. During early boot, we need to restore the
GDT that the firmware expects to be present. We can only jump to the
__KERNEL32_CS code segment for mixed mode calls after ExitBootServices()
has been invoked.

A liberal sprinkling of comments in the thunking code should make the
differences in early and late environments more apparent.

Reported-by: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Tested-by: Borislav Petkov <bp@xxxxxxx>
Signed-off-by: Matt Fleming <matt.fleming@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
arch/x86/boot/compressed/Makefile | 1
arch/x86/boot/compressed/efi_stub_64.S | 25 ----
arch/x86/boot/compressed/efi_thunk_64.S | 196 ++++++++++++++++++++++++++++++++
arch/x86/platform/efi/efi_stub_64.S | 161 --------------------------
arch/x86/platform/efi/efi_thunk_64.S | 121 ++++++++++++++++---
5 files changed, 301 insertions(+), 203 deletions(-)

--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -36,6 +36,7 @@ vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) +=
$(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone

vmlinux-objs-$(CONFIG_EFI_STUB) += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
+vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o

$(obj)/vmlinux: $(vmlinux-objs-y) FORCE
$(call if_changed,ld)
--- a/arch/x86/boot/compressed/efi_stub_64.S
+++ b/arch/x86/boot/compressed/efi_stub_64.S
@@ -3,28 +3,3 @@
#include <asm/processor-flags.h>

#include "../../platform/efi/efi_stub_64.S"
-
-#ifdef CONFIG_EFI_MIXED
- .code64
- .text
-ENTRY(efi64_thunk)
- push %rbp
- push %rbx
-
- subq $16, %rsp
- leaq efi_exit32(%rip), %rax
- movl %eax, 8(%rsp)
- leaq efi_gdt64(%rip), %rax
- movl %eax, 4(%rsp)
- movl %eax, 2(%rax) /* Fixup the gdt base address */
- leaq efi32_boot_gdt(%rip), %rax
- movl %eax, (%rsp)
-
- call __efi64_thunk
-
- addq $16, %rsp
- pop %rbx
- pop %rbp
- ret
-ENDPROC(efi64_thunk)
-#endif /* CONFIG_EFI_MIXED */
--- /dev/null
+++ b/arch/x86/boot/compressed/efi_thunk_64.S
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
+ *
+ * Early support for invoking 32-bit EFI services from a 64-bit kernel.
+ *
+ * Because this thunking occurs before ExitBootServices() we have to
+ * restore the firmware's 32-bit GDT before we make EFI serivce calls,
+ * since the firmware's 32-bit IDT is still currently installed and it
+ * needs to be able to service interrupts.
+ *
+ * On the plus side, we don't have to worry about mangling 64-bit
+ * addresses into 32-bits because we're executing with an identify
+ * mapped pagetable and haven't transitioned to 64-bit virtual addresses
+ * yet.
+ */
+
+#include <linux/linkage.h>
+#include <asm/msr.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+ .code64
+ .text
+ENTRY(efi64_thunk)
+ push %rbp
+ push %rbx
+
+ subq $8, %rsp
+ leaq efi_exit32(%rip), %rax
+ movl %eax, 4(%rsp)
+ leaq efi_gdt64(%rip), %rax
+ movl %eax, (%rsp)
+ movl %eax, 2(%rax) /* Fixup the gdt base address */
+
+ movl %ds, %eax
+ push %rax
+ movl %es, %eax
+ push %rax
+ movl %ss, %eax
+ push %rax
+
+ /*
+ * Convert x86-64 ABI params to i386 ABI
+ */
+ subq $32, %rsp
+ movl %esi, 0x0(%rsp)
+ movl %edx, 0x4(%rsp)
+ movl %ecx, 0x8(%rsp)
+ movq %r8, %rsi
+ movl %esi, 0xc(%rsp)
+ movq %r9, %rsi
+ movl %esi, 0x10(%rsp)
+
+ sgdt save_gdt(%rip)
+
+ leaq 1f(%rip), %rbx
+ movq %rbx, func_rt_ptr(%rip)
+
+ /*
+ * Switch to gdt with 32-bit segments. This is the firmware GDT
+ * that was installed when the kernel started executing. This
+ * pointer was saved at the EFI stub entry point in head_64.S.
+ */
+ leaq efi32_boot_gdt(%rip), %rax
+ lgdt (%rax)
+
+ pushq $__KERNEL_CS
+ leaq efi_enter32(%rip), %rax
+ pushq %rax
+ lretq
+
+1: addq $32, %rsp
+
+ lgdt save_gdt(%rip)
+
+ pop %rbx
+ movl %ebx, %ss
+ pop %rbx
+ movl %ebx, %es
+ pop %rbx
+ movl %ebx, %ds
+
+ /*
+ * Convert 32-bit status code into 64-bit.
+ */
+ test %rax, %rax
+ jz 1f
+ movl %eax, %ecx
+ andl $0x0fffffff, %ecx
+ andl $0xf0000000, %eax
+ shl $32, %rax
+ or %rcx, %rax
+1:
+ addq $8, %rsp
+ pop %rbx
+ pop %rbp
+ ret
+ENDPROC(efi64_thunk)
+
+ENTRY(efi_exit32)
+ movq func_rt_ptr(%rip), %rax
+ push %rax
+ mov %rdi, %rax
+ ret
+ENDPROC(efi_exit32)
+
+ .code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+ENTRY(efi_enter32)
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+
+ /* Reload pgtables */
+ movl %cr3, %eax
+ movl %eax, %cr3
+
+ /* Disable paging */
+ movl %cr0, %eax
+ btrl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+
+ /* Disable long mode via EFER */
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btrl $_EFER_LME, %eax
+ wrmsr
+
+ call *%edi
+
+ /* We must preserve return value */
+ movl %eax, %edi
+
+ /*
+ * Some firmware will return with interrupts enabled. Be sure to
+ * disable them before we switch GDTs.
+ */
+ cli
+
+ movl 56(%esp), %eax
+ movl %eax, 2(%eax)
+ lgdtl (%eax)
+
+ movl %cr4, %eax
+ btsl $(X86_CR4_PAE_BIT), %eax
+ movl %eax, %cr4
+
+ movl %cr3, %eax
+ movl %eax, %cr3
+
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btsl $_EFER_LME, %eax
+ wrmsr
+
+ xorl %eax, %eax
+ lldt %ax
+
+ movl 60(%esp), %eax
+ pushl $__KERNEL_CS
+ pushl %eax
+
+ /* Enable paging */
+ movl %cr0, %eax
+ btsl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+ lret
+ENDPROC(efi_enter32)
+
+ .data
+ .balign 8
+ .global efi32_boot_gdt
+efi32_boot_gdt: .word 0
+ .quad 0
+
+save_gdt: .word 0
+ .quad 0
+func_rt_ptr: .quad 0
+
+ .global efi_gdt64
+efi_gdt64:
+ .word efi_gdt64_end - efi_gdt64
+ .long 0 /* Filled out by user */
+ .word 0
+ .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
+ .quad 0x0080890000000000 /* TS descriptor */
+ .quad 0x0000000000000000 /* TS continued */
+efi_gdt64_end:
--- a/arch/x86/platform/efi/efi_stub_64.S
+++ b/arch/x86/platform/efi/efi_stub_64.S
@@ -91,167 +91,6 @@ ENTRY(efi_call)
ret
ENDPROC(efi_call)

-#ifdef CONFIG_EFI_MIXED
-
-/*
- * We run this function from the 1:1 mapping.
- *
- * This function must be invoked with a 1:1 mapped stack.
- */
-ENTRY(__efi64_thunk)
- movl %ds, %eax
- push %rax
- movl %es, %eax
- push %rax
- movl %ss, %eax
- push %rax
-
- subq $32, %rsp
- movl %esi, 0x0(%rsp)
- movl %edx, 0x4(%rsp)
- movl %ecx, 0x8(%rsp)
- movq %r8, %rsi
- movl %esi, 0xc(%rsp)
- movq %r9, %rsi
- movl %esi, 0x10(%rsp)
-
- sgdt save_gdt(%rip)
-
- leaq 1f(%rip), %rbx
- movq %rbx, func_rt_ptr(%rip)
-
- /* Switch to gdt with 32-bit segments */
- movl 64(%rsp), %eax
- lgdt (%rax)
-
- leaq efi_enter32(%rip), %rax
- pushq $__KERNEL_CS
- pushq %rax
- lretq
-
-1: addq $32, %rsp
-
- lgdt save_gdt(%rip)
-
- pop %rbx
- movl %ebx, %ss
- pop %rbx
- movl %ebx, %es
- pop %rbx
- movl %ebx, %ds
-
- /*
- * Convert 32-bit status code into 64-bit.
- */
- test %rax, %rax
- jz 1f
- movl %eax, %ecx
- andl $0x0fffffff, %ecx
- andl $0xf0000000, %eax
- shl $32, %rax
- or %rcx, %rax
-1:
- ret
-ENDPROC(__efi64_thunk)
-
-ENTRY(efi_exit32)
- movq func_rt_ptr(%rip), %rax
- push %rax
- mov %rdi, %rax
- ret
-ENDPROC(efi_exit32)
-
- .code32
-/*
- * EFI service pointer must be in %edi.
- *
- * The stack should represent the 32-bit calling convention.
- */
-ENTRY(efi_enter32)
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %ss
-
- /* Reload pgtables */
- movl %cr3, %eax
- movl %eax, %cr3
-
- /* Disable paging */
- movl %cr0, %eax
- btrl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
-
- /* Disable long mode via EFER */
- movl $MSR_EFER, %ecx
- rdmsr
- btrl $_EFER_LME, %eax
- wrmsr
-
- call *%edi
-
- /* We must preserve return value */
- movl %eax, %edi
-
- /*
- * Some firmware will return with interrupts enabled. Be sure to
- * disable them before we switch GDTs.
- */
- cli
-
- movl 68(%esp), %eax
- movl %eax, 2(%eax)
- lgdtl (%eax)
-
- movl %cr4, %eax
- btsl $(X86_CR4_PAE_BIT), %eax
- movl %eax, %cr4
-
- movl %cr3, %eax
- movl %eax, %cr3
-
- movl $MSR_EFER, %ecx
- rdmsr
- btsl $_EFER_LME, %eax
- wrmsr
-
- xorl %eax, %eax
- lldt %ax
-
- movl 72(%esp), %eax
- pushl $__KERNEL_CS
- pushl %eax
-
- /* Enable paging */
- movl %cr0, %eax
- btsl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
- lret
-ENDPROC(efi_enter32)
-
- .data
- .balign 8
- .global efi32_boot_gdt
-efi32_boot_gdt: .word 0
- .quad 0
-
-save_gdt: .word 0
- .quad 0
-func_rt_ptr: .quad 0
-
- .global efi_gdt64
-efi_gdt64:
- .word efi_gdt64_end - efi_gdt64
- .long 0 /* Filled out by user */
- .word 0
- .quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x00af9a000000ffff /* __KERNEL_CS */
- .quad 0x00cf92000000ffff /* __KERNEL_DS */
- .quad 0x0080890000000000 /* TS descriptor */
- .quad 0x0000000000000000 /* TS continued */
-efi_gdt64_end:
-#endif /* CONFIG_EFI_MIXED */
-
.data
ENTRY(efi_scratch)
.fill 3,8,0
--- a/arch/x86/platform/efi/efi_thunk_64.S
+++ b/arch/x86/platform/efi/efi_thunk_64.S
@@ -1,9 +1,26 @@
/*
* Copyright (C) 2014 Intel Corporation; author Matt Fleming
+ *
+ * Support for invoking 32-bit EFI runtime services from a 64-bit
+ * kernel.
+ *
+ * The below thunking functions are only used after ExitBootServices()
+ * has been called. This simplifies things considerably as compared with
+ * the early EFI thunking because we can leave all the kernel state
+ * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime
+ * services from __KERNEL32_CS. This means we can continue to service
+ * interrupts across an EFI mixed mode call.
+ *
+ * We do however, need to handle the fact that we're running in a full
+ * 64-bit virtual address space. Things like the stack and instruction
+ * addresses need to be accessible by the 32-bit firmware, so we rely on
+ * using the identity mappings in the EFI page table to access the stack
+ * and kernel text (see efi_setup_page_tables()).
*/

#include <linux/linkage.h>
#include <asm/page_types.h>
+#include <asm/segment.h>

.text
.code64
@@ -33,14 +50,6 @@ ENTRY(efi64_thunk)
leaq efi_exit32(%rip), %rbx
subq %rax, %rbx
movl %ebx, 8(%rsp)
- leaq efi_gdt64(%rip), %rbx
- subq %rax, %rbx
- movl %ebx, 2(%ebx)
- movl %ebx, 4(%rsp)
- leaq efi_gdt32(%rip), %rbx
- subq %rax, %rbx
- movl %ebx, 2(%ebx)
- movl %ebx, (%rsp)

leaq __efi64_thunk(%rip), %rbx
subq %rax, %rbx
@@ -52,14 +61,92 @@ ENTRY(efi64_thunk)
retq
ENDPROC(efi64_thunk)

- .data
-efi_gdt32:
- .word efi_gdt32_end - efi_gdt32
- .long 0 /* Filled out above */
- .word 0
- .quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x00cf9a000000ffff /* __KERNEL_CS */
- .quad 0x00cf93000000ffff /* __KERNEL_DS */
-efi_gdt32_end:
+/*
+ * We run this function from the 1:1 mapping.
+ *
+ * This function must be invoked with a 1:1 mapped stack.
+ */
+ENTRY(__efi64_thunk)
+ movl %ds, %eax
+ push %rax
+ movl %es, %eax
+ push %rax
+ movl %ss, %eax
+ push %rax
+
+ subq $32, %rsp
+ movl %esi, 0x0(%rsp)
+ movl %edx, 0x4(%rsp)
+ movl %ecx, 0x8(%rsp)
+ movq %r8, %rsi
+ movl %esi, 0xc(%rsp)
+ movq %r9, %rsi
+ movl %esi, 0x10(%rsp)
+
+ leaq 1f(%rip), %rbx
+ movq %rbx, func_rt_ptr(%rip)
+
+ /* Switch to 32-bit descriptor */
+ pushq $__KERNEL32_CS
+ leaq efi_enter32(%rip), %rax
+ pushq %rax
+ lretq
+
+1: addq $32, %rsp
+
+ pop %rbx
+ movl %ebx, %ss
+ pop %rbx
+ movl %ebx, %es
+ pop %rbx
+ movl %ebx, %ds

+ /*
+ * Convert 32-bit status code into 64-bit.
+ */
+ test %rax, %rax
+ jz 1f
+ movl %eax, %ecx
+ andl $0x0fffffff, %ecx
+ andl $0xf0000000, %eax
+ shl $32, %rax
+ or %rcx, %rax
+1:
+ ret
+ENDPROC(__efi64_thunk)
+
+ENTRY(efi_exit32)
+ movq func_rt_ptr(%rip), %rax
+ push %rax
+ mov %rdi, %rax
+ ret
+ENDPROC(efi_exit32)
+
+ .code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+ENTRY(efi_enter32)
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+
+ call *%edi
+
+ /* We must preserve return value */
+ movl %eax, %edi
+
+ movl 72(%esp), %eax
+ pushl $__KERNEL_CS
+ pushl %eax
+
+ lret
+ENDPROC(efi_enter32)
+
+ .data
+ .balign 8
+func_rt_ptr: .quad 0
efi_saved_sp: .quad 0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Greg Kroah-Hartman: "[PATCH 3.18 111/151] vt: provide notifications on selection changes"
Previous message: Tuomas Tynkkynen: "Re: [PATCH v8 15/18] cpufreq: Add cpufreq driver for Tegra124"
In reply to: Greg Kroah-Hartman: "[PATCH 3.18 151/151] x86: pmc-atom: Assign debugfs node as soon as possible"
Next in thread: Greg Kroah-Hartman: "[PATCH 3.18 111/151] vt: provide notifications on selection changes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]