Re: [PATCH v2] rtc: add Abracon ABx80x driver
From: Alexandre Belloni
Date: Wed Mar 04 2015 - 05:38:25 EST
On 04/03/2015 at 10:55:56 +0100, Philippe De Muyter wrote :
> > The "AB08XX Real-Time Clock Family" document states that they are all
> > software and pin compatible (including the AB18xx).
>
> Which part(s) do you really have ? Mine is a 1805. Do all the parts have
> the trickle charger ? As I don't know, I prefer not to pretend that the
> driver supports those chips.
>
I have the AB0805. The trickle charger is not available on ABx8x1 and
ABx8x3.
> > > My hardware colleagues told me that the only way to enable the 'ultra low-power'
> > > functionality is enabling the trickle charger. And the 'ultra low-power'
> > > functionality is the reason we choose that chip, so I would at least
> > > keep that as the default behaviour.
> > >
> >
> > My concern is that you have a static configuration. I would expose a
> > sysfs interface to configure the diode, resistor and enable/disable the
> > trickle charger. Would that work for you?
>
> I think a 'of_xxx' dts/dtb description is the way to go, but I did not want to
> introduce unnecessaty complexity without knowing other usages. My hardware
> colleagues followed the recommended design from Abracon.
>
Yeah, I'm not sure about the DT description, some may argue this is
configuration. But I guess it actually depends on the battery you are
using so that could count as hardware description.
I'll use:
abracon,tc-diode = "(standard|schottky)"
abracon,tc-resistor = <(0|3|6|11)>
If both are defined and valid, I'll enable the trickle charger with the
provided configuration in probe().
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/