[PATCH v1 1/2] mfd: da9052: Fix register access via SPI
From: Adam Ward
Date: Wed Mar 04 2015 - 12:38:25 EST
The range of registers used by this driver exceeds that available
via SPI with no paging (127), so we have to override the values
from the default config which is set-up for I2C access.
Also change SPI settings to match device's recommended OTP values.
Signed-off-by: Adam Ward <adam.ward.opensource@xxxxxxxxxxx>
Tested-by: Adam Ward <adam.ward.opensource@xxxxxxxxxxx>
---
drivers/mfd/da9052-spi.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index 45ae0b7..b5de8a6 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -32,7 +32,7 @@ static int da9052_spi_probe(struct spi_device *spi)
if (!da9052)
return -ENOMEM;
- spi->mode = SPI_MODE_0 | SPI_CPOL;
+ spi->mode = SPI_MODE_0;
spi->bits_per_word = 8;
spi_setup(spi);
@@ -43,6 +43,10 @@ static int da9052_spi_probe(struct spi_device *spi)
config = da9052_regmap_config;
config.read_flag_mask = 1;
+ config.reg_bits = 7;
+ config.pad_bits = 1;
+ config.val_bits = 8;
+ config.use_single_rw = 1;
da9052->regmap = devm_regmap_init_spi(spi, &config);
if (IS_ERR(da9052->regmap)) {
--
end-of-patch for mfd: da9052: Fix SPI access and IRQ config
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/