On Thu, 2015-03-05 at 09:46 +0000, Srinivas Kandagatla wrote:Will fix it in next version.
diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig
index bff8ecb..65325c7 100644
--- a/drivers/eeprom/Kconfig
+++ b/drivers/eeprom/Kconfig
@@ -28,4 +28,11 @@ config EEPROM_SUNXI_SID
This driver can also be built as a module. If so, the module
will be called sunxi_sid.
+config QCOM_QFPROM
+ tristate "QCOM QFPROM Support"
+ depends on EEPROM
Make this one tab, please.
+ select REGMAP_MMIO
+ help
+ Say y here to enable QFPROM support. The QFPROM provides access
+ functions for QFPROM data to rest of the drivers via eeprom interface.
And this one tab and two spaces, please.
All utterly trivial, of course, but I found a less trivial problem with
this patch, so I included these two comments anyway.
Yes, I meant GPL v2, and will fix the license header too in next version.endif
diff --git a/drivers/eeprom/Makefile b/drivers/eeprom/Makefile
index 661422c..f99c824 100644
--- a/drivers/eeprom/Makefile
+++ b/drivers/eeprom/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_EEPROM) += core.o
# Devices
obj-$(CONFIG_EEPROM_SUNXI_SID) += eeprom-sunxi-sid.o
+obj-$(CONFIG_QCOM_QFPROM) += qfprom.o
diff --git a/drivers/eeprom/qfprom.c b/drivers/eeprom/qfprom.c
new file mode 100644
index 0000000..371a8c0
--- /dev/null
+++ b/drivers/eeprom/qfprom.c
@@ -0,0 +1,74 @@
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/eeprom-provider.h>
[...]
+MODULE_LICENSE("GPL2");
This will taint the kernel on module load. I guess you meant
MODULE_LICENSE("GPL v2");
but there's no comment with some lines about the license at the top of
this file, so I can't be sure.
--
Paul Bolle
(Chances are that by the end of this week everybody is so tired of
messages like this that people actually check this stuff before
submitting, and there's no need to review this anymore for the rest of
this year. That would be mission accomplished, I guess.)