[x86/xen] WARNING: CPU: 0 PID: 1 at arch/x86/xen/apic.c:73 xen_apic_write()
From: Fengguang Wu
Date: Fri Mar 06 2015 - 00:58:47 EST
Greetings,
0day kernel testing robot got the below dmesg and the first bad commit is
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip revert-3f4560207f796d5f79c18329d5a5d383fe3c97bb-3f4560207f796d5f79c18329d5a5d383fe3c97bb
commit 3f4560207f796d5f79c18329d5a5d383fe3c97bb
Author: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
AuthorDate: Mon Mar 2 12:06:23 2015 -0500
Commit: David Vrabel <david.vrabel@xxxxxxxxxx>
CommitDate: Mon Mar 2 17:15:05 2015 +0000
x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
Instead of mangling the default APIC driver, provide a Xen PV guest
specific one that explicitly provides appropriate methods.
This allows use to report that all APIC IDs are valid, allowing dom0
to boot with more than 255 VCPUs.
Since the probe order of APIC drivers is link dependent, we add in an
late probe function to change to the Xen PV if it hadn't been done
during bootup.
Suggested-by: David Vrabel <david.vrabel@xxxxxxxxxx>
Reported-by: Cathy Avery <cathy.avery@xxxxxxxxxx>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Signed-off-by: David Vrabel <david.vrabel@xxxxxxxxxx>
+--------------------------------------------------+------------+------------+------------+
| | dbc36df319 | 3f4560207f | 64abd71342 |
+--------------------------------------------------+------------+------------+------------+
| boot_successes | 60 | 0 | 0 |
| boot_failures | 0 | 20 | 12 |
| WARNING:at_arch/x86/xen/apic.c:#xen_apic_write() | 0 | 20 | 12 |
| BUG:kernel_boot_hang | 0 | 9 | 2 |
| backtrace:native_smp_prepare_cpus | 0 | 20 | 12 |
| backtrace:kernel_init_freeable | 0 | 20 | 12 |
+--------------------------------------------------+------------+------------+------------+
[ 0.021336] Freeing SMP alternatives memory: 32K (ffffffff8264c000 - ffffffff82654000)
[ 0.027813] Getting VERSION: 0
[ 0.028005] ------------[ cut here ]------------
[ 0.028838] WARNING: CPU: 0 PID: 1 at arch/x86/xen/apic.c:73 xen_apic_write+0x15/0x17()
[ 0.032006] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-00008-g3f45602 #10
[ 0.033313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 0.035045] 0000000000000009 ffff88001144fe58 ffffffff81b4bc0c 000000000000005e
[ 0.036329] 0000000000000000 ffff88001144fe98 ffffffff810729f0 0000000000000000
[ 0.037692] ffffffff81009b3b 0000000000000008 0000000000000000 000000000000a108
[ 0.039067] Call Trace:
[ 0.039506] [<ffffffff81b4bc0c>] dump_stack+0x4c/0x6e
[ 0.040008] [<ffffffff810729f0>] warn_slowpath_common+0x92/0xac
[ 0.041048] [<ffffffff81009b3b>] ? xen_apic_write+0x15/0x17
[ 0.042032] [<ffffffff81072ac1>] warn_slowpath_null+0x15/0x17
[ 0.044007] [<ffffffff81009b3b>] xen_apic_write+0x15/0x17
[ 0.044964] [<ffffffff82562db1>] verify_local_APIC+0x50/0x1a5
[ 0.045980] [<ffffffff825611f3>] native_smp_prepare_cpus+0x1f9/0x2d2
[ 0.047093] [<ffffffff825521fd>] kernel_init_freeable+0x115/0x258
[ 0.048007] [<ffffffff81b467c2>] ? rest_init+0xbc/0xbc
[ 0.048915] [<ffffffff81b467cb>] kernel_init+0x9/0xd5
[ 0.049810] [<ffffffff81b5cb3c>] ret_from_fork+0x7c/0xb0
[ 0.050753] [<ffffffff81b467c2>] ? rest_init+0xbc/0xbc
[ 0.052021] ---[ end trace 2224f94bfa1995b9 ]---
[ 0.052835] Getting VERSION: 0
git bisect start 64abd713427959b0c88f3f7ddc38888a519d9628 c517d838eb7d07bbe9507871fab3931deccff539 --
git bisect bad 564cdc396432bb58399bee9c85d2f9c9dbd1f4c8 # 02:32 0- 20 Merge 'xen-tip/devel/for-linus-4.1' into devel-xian-x86_64-201503030145
git bisect good 42d429fb535b1ed2a8f2bd64e5e2b0d1507020e8 # 03:30 20+ 0 Merge 'slave-dma/for-linus' into devel-xian-x86_64-201503030145
git bisect good 358928c49c157cfd513af221ccabe22434a63bbe # 03:55 20+ 4 Merge 'cgroup/for-4.1' into devel-xian-x86_64-201503030145
git bisect good 058e1fa5f35fbd876af4e1bcc1f938218a28706e # 04:16 20+ 0 Merge 'wq/for-4.0-fixes' into devel-xian-x86_64-201503030145
git bisect good 06324125b0143ed0efe6c3db9b210ce2fe0f255d # 04:27 20+ 10 xen: synchronize include/xen/interface/xen.h with xen
git bisect good f227b2ffd052e52f51c78c692eec4ccfba180d31 # 04:43 20+ 1 xen: use generated hypercall symbols in arch/x86/xen/xen-head.S
git bisect bad 3f4560207f796d5f79c18329d5a5d383fe3c97bb # 05:11 0- 11 x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
git bisect good dbc36df3197da8364f9a58f76970968c7862eb60 # 05:45 20+ 0 xen/pciback: Don't print scary messages when unsupported by hypervisor.
# first bad commit: [3f4560207f796d5f79c18329d5a5d383fe3c97bb] x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
git bisect good dbc36df3197da8364f9a58f76970968c7862eb60 # 05:48 60+ 0 xen/pciback: Don't print scary messages when unsupported by hypervisor.
# extra tests with DEBUG_INFO
git bisect good 3f4560207f796d5f79c18329d5a5d383fe3c97bb # 06:00 60+ 0 x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
# extra tests on HEAD of linux-devel/devel-xian-x86_64-201503030145
git bisect bad 64abd713427959b0c88f3f7ddc38888a519d9628 # 06:00 0- 12 0day head guard for 'devel-xian-x86_64-201503030145'
# extra tests on tree/branch xen-tip/devel/for-linus-4.1
git bisect bad 3f4560207f796d5f79c18329d5a5d383fe3c97bb # 06:10 0- 20 x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
# extra tests with first bad commit reverted
# extra tests on tree/branch linus/master
git bisect good a38ecbbd0be025a6ecbbfd22d2575a5b46317117 # 06:31 60+ 3 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# extra tests on tree/branch next/master
git bisect good 8bcbe02ae769f1753eb19d57897d71c731d57772 # 06:41 60+ 51 Add linux-next specific files for 20150302
This script may reproduce the error.
----------------------------------------------------------------------------
#!/bin/bash
kernel=$1
initrd=quantal-core-x86_64.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/initrd/$initrd
kvm=(
qemu-system-x86_64
-cpu kvm64
-enable-kvm
-kernel $kernel
-initrd $initrd
-m 320
-smp 2
-net nic,vlan=1,model=e1000
-net user,vlan=1
-boot order=nc
-no-reboot
-watchdog i6300esb
-rtc base=localtime
-serial stdio
-display none
-monitor null
)
append=(
hung_task_panic=1
earlyprintk=ttyS0,115200
rd.udev.log-priority=err
systemd.log_target=journal
systemd.log_level=warning
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
console=ttyS0,115200
console=tty0
vga=normal
root=/dev/ram0
rw
drbd.minor_count=8
)
"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------
Thanks,
Fengguang
early console in setup code
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.0.0-rc1-00008-g3f45602 (kbuild@xian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #10 SMP PREEMPT Tue Mar 3 05:08:59 CST 2015
[ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-acpi-redef/linux-devel:devel-xian-x86_64-201503030145:3f4560207f796d5f79c18329d5a5d383fe3c97bb:bisect-linux-8/.vmlinuz-3f4560207f796d5f79c18329d5a5d383fe3c97bb-20150303050946-12-client1 branch=linux-devel/devel-xian-x86_64-201503030145 BOOT_IMAGE=/kernel/x86_64-acpi-redef/3f4560207f796d5f79c18329d5a5d383fe3c97bb/vmlinuz-4.0.0-rc1-00008-g3f45602 drbd.minor_count=8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0]
[ 0.000000] mpc: f0ec0-f0fa4
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x032c2000, 0x032c2fff] PGTABLE
[ 0.000000] BRK [0x032c3000, 0x032c3fff] PGTABLE
[ 0.000000] BRK [0x032c4000, 0x032c4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff]
[ 0.000000] [mem 0x12600000-0x127fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x125fffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x125fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x12800000-0x13fdffff]
[ 0.000000] [mem 0x12800000-0x13dfffff] page 2M
[ 0.000000] [mem 0x13e00000-0x13fdffff] page 4k
[ 0.000000] BRK [0x032c5000, 0x032c5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x12925000-0x13fd7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0C90 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x0000000013FE18BD 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x0000000013FE0000 000040
[ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x0000000013FE1805 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x0000000013FE1885 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to Xen PV.
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:13fdf001, primary cpu clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000013fdffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000013fdffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[ 0.000000] On node 0 totalpages: 81790
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1216 pages used for memmap
[ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 477 pages/cpu @ffff880012400000 s1923736 r0 d30056 u2097152
[ 0.000000] pcpu-alloc: s1923736 r0 d30056 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1240e0c0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80489
[ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-acpi-redef/linux-devel:devel-xian-x86_64-201503030145:3f4560207f796d5f79c18329d5a5d383fe3c97bb:bisect-linux-8/.vmlinuz-3f4560207f796d5f79c18329d5a5d383fe3c97bb-20150303050946-12-client1 branch=linux-devel/devel-xian-x86_64-201503030145 BOOT_IMAGE=/kernel/x86_64-acpi-redef/3f4560207f796d5f79c18329d5a5d383fe3c97bb/vmlinuz-4.0.0-rc1-00008-g3f45602 drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 257404K/327160K available (11652K kernel code, 1511K rwdata, 5632K rodata, 2884K init, 12724K bss, 69756K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:4352 nr_irqs:440 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 8639 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] ODEBUG: selftest passed
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2992.398 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5984.79 BogoMIPS (lpj=11969592)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] ACPI: Core revision 20150204
[ 0.013191] ACPI: All ACPI Tables successfully acquired
[ 0.014292] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.015442] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.016460] Initializing cgroup subsys freezer
[ 0.017236] Initializing cgroup subsys debug
[ 0.018110] mce: CPU supports 10 MCE banks
[ 0.018889] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.020004] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.021336] Freeing SMP alternatives memory: 32K (ffffffff8264c000 - ffffffff82654000)
[ 0.027813] Getting VERSION: 0
[ 0.028005] ------------[ cut here ]------------
[ 0.028838] WARNING: CPU: 0 PID: 1 at arch/x86/xen/apic.c:73 xen_apic_write+0x15/0x17()
[ 0.032006] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-00008-g3f45602 #10
[ 0.033313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 0.035045] 0000000000000009 ffff88001144fe58 ffffffff81b4bc0c 000000000000005e
[ 0.036329] 0000000000000000 ffff88001144fe98 ffffffff810729f0 0000000000000000
[ 0.037692] ffffffff81009b3b 0000000000000008 0000000000000000 000000000000a108
[ 0.039067] Call Trace:
[ 0.039506] [<ffffffff81b4bc0c>] dump_stack+0x4c/0x6e
[ 0.040008] [<ffffffff810729f0>] warn_slowpath_common+0x92/0xac
[ 0.041048] [<ffffffff81009b3b>] ? xen_apic_write+0x15/0x17
[ 0.042032] [<ffffffff81072ac1>] warn_slowpath_null+0x15/0x17
[ 0.044007] [<ffffffff81009b3b>] xen_apic_write+0x15/0x17
[ 0.044964] [<ffffffff82562db1>] verify_local_APIC+0x50/0x1a5
[ 0.045980] [<ffffffff825611f3>] native_smp_prepare_cpus+0x1f9/0x2d2
[ 0.047093] [<ffffffff825521fd>] kernel_init_freeable+0x115/0x258
[ 0.048007] [<ffffffff81b467c2>] ? rest_init+0xbc/0xbc
[ 0.048915] [<ffffffff81b467cb>] kernel_init+0x9/0xd5
[ 0.049810] [<ffffffff81b5cb3c>] ret_from_fork+0x7c/0xb0
[ 0.050753] [<ffffffff81b467c2>] ? rest_init+0xbc/0xbc
[ 0.052021] ---[ end trace 2224f94bfa1995b9 ]---
[ 0.052835] Getting VERSION: 0
[ 0.053374] Switched APIC routing to flat.
[ 0.054174] enabled ExtINT on CPU#0
[ 0.056581] ENABLING IO-APIC IRQs
[ 0.057281] init IO_APIC IRQs
[ 0.057800] apic 0 pin 0 not connected
[ 0.058500] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.059891] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.060026] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.061405] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.064023] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.065631] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.068023] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.069423] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.070819] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.072024] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.073417] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.074825] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.076023] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.077435] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.080026] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.081449] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.084021] apic 0 pin 16 not connected
[ 0.084699] apic 0 pin 17 not connected
[ 0.085390] apic 0 pin 18 not connected
[ 0.086080] apic 0 pin 19 not connected
[ 0.086756] apic 0 pin 20 not connected
[ 0.087445] apic 0 pin 21 not connected
[ 0.088003] apic 0 pin 22 not connected
[ 0.088796] apic 0 pin 23 not connected
[ 0.089774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.092004] Using local APIC timer interrupts.
[ 0.092004] calibrating APIC timer ...
[ 0.096000] ... lapic delta = 6249983
[ 0.096000] ... PM-Timer delta = 357954
[ 0.096000] ... PM-Timer result ok
[ 0.096000] ..... delta 6249983
[ 0.096000] ..... mult: 268434725
[ 0.096000] ..... calibration result: 3999989
[ 0.096000] ..... CPU clock speed is 2992.1608 MHz.
[ 0.096000] ..... host bus clock speed is 999.3989 MHz.
[ 0.096076] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.098296] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.124156] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.132425] x86: Booting SMP configuration:
[ 0.133201] .... node #0, CPUs: #1
[ 0.008000] kvm-clock: cpu 1, msr 0:13fdf041, secondary cpu clock
[ 0.008000] masked ExtINT on CPU#1
[ 0.152000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.152000] Measured 98 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.152000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.152180] x86: Booted up 1 node, 2 CPUs
[ 0.152872] smpboot: Total of 2 processors activated (11969.59 BogoMIPS)
[ 0.156323] devtmpfs: initialized
[ 0.159856] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.152156] KVM setup async PF for cpu 1
[ 0.152156] kvm-stealtime: cpu 1, msr 1260e0c0
[ 0.164161] NET: Registered protocol family 16
[ 0.178548] cpuidle: using governor ladder
[ 0.188030] cpuidle: using governor menu
[ 0.190007] ACPI: bus type PCI registered
[ 0.190910] PCI: Using configuration type 1 for base access
[ 0.233760] ACPI: Added _OSI(Module Device)
[ 0.234496] ACPI: Added _OSI(Processor Device)
[ 0.235256] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.236005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.239459] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:3)
[ 0.245474] ACPI: Interpreter enabled
[ 0.248014] ACPI: (supports S0 S5)
[ 0.248583] ACPI: Using IOAPIC for interrupt routing
[ 0.252051] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.271276] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.272010] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.273006] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.275344] PCI host bridge to bus 0000:00
[ 0.276004] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.276925] pci_bus 0000:00: root bus resource [io 0x0cf8-0x0cff]
[ 0.277950] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.279193] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff window]
[ 0.280003] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff window]
[ 0.284007] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf window]
[ 0.288003] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff window]
[ 0.289128] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.290359] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[ 0.291665] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.292843] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.294865] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.300277] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f]
[ 0.302221] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.304004] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.305098] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.306279] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.308244] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.309974] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.311197] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.312628] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.315025] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.317033] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.323448] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.325353] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.328006] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[ 0.329874] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.334988] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.336493] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[ 0.337996] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[ 0.342826] pci_bus 0000:00: on NUMA node 0
[ 0.344752] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.346148] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.347403] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.348502] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.349660] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.351623] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.353652] SCSI subsystem initialized
[ 0.356111] libata version 3.00 loaded.
[ 0.356883] ACPI: bus type USB registered
[ 0.357633] usbcore: registered new interface driver usbfs
[ 0.358569] usbcore: registered new interface driver hub
[ 0.359545] usbcore: registered new device driver usb
[ 0.360144] Linux video capture interface: v2.00
[ 0.361005] pps_core: LinuxPPS API ver. 1 registered
[ 0.361831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.364087] PTP clock support registered
[ 0.364895] wmi: Mapper loaded
[ 0.365596] Advanced Linux Sound Architecture Driver Initialized.
[ 0.366651] PCI: Using ACPI for IRQ routing
[ 0.367362] PCI: pci_cache_line_size set to 64 bytes
[ 0.368192] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.369364] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[ 0.370918] NET: Registered protocol family 8
[ 0.372030] NET: Registered protocol family 20
[ 0.373093] cfg80211: Calling CRDA to update world regulatory domain
[ 0.375569] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.376057] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.377000] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.381365] Switched to clocksource kvm-clock
[ 0.381365] pnp: PnP ACPI init
[ 0.381654] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[ 0.383067] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.384240] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[ 0.385641] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.386767] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[ 0.388211] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.389398] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[ 0.390741] pnp 00:03: [dma 2]
[ 0.393192] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.394406] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[ 0.395802] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.397138] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[ 0.398565] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.400414] pnp: PnP ACPI: found 6 devices
[ 0.407419] pci_bus 0000:00: resource 4 [io 0x0cf8-0x0cff]
[ 0.408446] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window]
[ 0.410268] pci_bus 0000:00: resource 6 [io 0x0d00-0xadff window]
[ 0.411294] pci_bus 0000:00: resource 7 [io 0xae0f-0xaeff window]
[ 0.412333] pci_bus 0000:00: resource 8 [io 0xaf20-0xafdf window]
[ 0.413408] pci_bus 0000:00: resource 9 [io 0xafe4-0xffff window]
[ 0.414478] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[ 0.415646] pci_bus 0000:00: resource 11 [mem 0x14000000-0xfebfffff window]
[ 0.418289] NET: Registered protocol family 2
[ 0.419480] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.420750] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[ 0.422274] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.423367] TCP: reno registered
[ 0.423927] UDP hash table entries: 256 (order: 3, 49152 bytes)
[ 0.424958] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[ 0.426247] NET: Registered protocol family 1
[ 0.427008] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.428024] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.429013] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.430132] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.431119] PCI: CLS 0 bytes, default 64
[ 0.431988] Trying to unpack rootfs image as initramfs...
[ 1.340755] Freeing initrd memory: 23244K (ffff880012925000 - ffff880013fd8000)
[ 1.344467] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
[ 1.345986] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64.
[ 1.348734] cryptomgr_test (36) used greatest stack depth: 14888 bytes left
[ 1.348745] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[ 1.351671] AVX or AES-NI instructions are not detected.
[ 1.352621] AVX instructions are not detected.
[ 1.353344] AVX instructions are not detected.
[ 1.354081] AVX instructions are not detected.
[ 1.355483] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 1.356674] audit: initializing netlink subsys (disabled)
[ 1.357649] audit: type=2000 audit(1425330425.935:1): initialized
[ 1.367668] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.392103] 9p: Installing v9fs 9p2000 file system support
[ 1.399576] Key type asymmetric registered
[ 1.400501] bounce: pool size: 64 pages
[ 1.401516] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.402884] io scheduler noop registered (default)
[ 1.403916] start plist test
[ 1.405957] end plist test
[ 1.413328] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[ 1.414154] crc32: self tests passed, processed 225944 bytes in 3170242 nsec
[ 1.419081] crc32c: CRC_LE_BITS = 1
[ 1.419737] crc32c: self tests passed, processed 225944 bytes in 1845828 nsec
[ 1.603244] crc32_combine: 8373 self tests passed
[ 1.769502] crc32c_combine: 8373 self tests passed
[ 1.770731] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.772179] rivafb_setup START
[ 1.773020] vmlfb: initializing
[ 1.773805] usbcore: registered new interface driver udlfb
[ 1.774737] usbcore: registered new interface driver smscufx
[ 1.775973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.777203] ACPI: Power Button [PWRF]
[ 1.848078] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 1.849029] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.874575] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.877231] Initializing Nozomi driver 2.1d
[ 1.878046] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[ 1.879279] ac.o: No PCI boards found.
[ 1.879914] ac.o: For an ISA board you must supply memory and irq parameters.
[ 1.886888] Non-volatile memory driver v1.3
[ 1.887879] Linux agpgart interface v0.103
[ 1.888787] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.890279] [drm] Initialized drm 1.1.0 20060810
[ 1.898251] brd: module loaded
[ 1.899127] mtip32xx Version 1.3.1
[ 1.899888] Phantom Linux Driver, version n0.9.8, init OK
[ 1.901473] usbcore: registered new interface driver viperboard
[ 1.902539] Uniform Multi-Platform E-IDE driver
[ 1.903657] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 1.904846] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 1.907398] ide0: BM-DMA at 0xc040-0xc047
[ 1.908201] ide1: BM-DMA at 0xc048-0xc04f
[ 1.908933] Probing IDE interface ide0...
[ 2.484319] Probing IDE interface ide1...
[ 3.224159] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 3.900248] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 3.901420] hdc: MWDMA2 mode selected
[ 3.902254] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.903076] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.904941] ide-gd driver 1.18
[ 3.905694] Loading iSCSI transport class v2.0-870.
[ 3.915696] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17
[ 3.916719] fnic: Successfully Initialized Trace Buffer
[ 3.917786] fnic: Successfully Initialized FC_CTLR Trace Buffer
[ 3.919443] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 3.920374] Detecting Adaptec I2O RAID controllers...
[ 3.921229] Adaptec aacraid driver 1.2-0[30300]-ms
[ 3.922174] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
[ 3.923560] csiostor: Chelsio FCoE driver 1.0.0
[ 3.924511] megasas: 06.806.08.00-rc1
[ 3.925177] mpt2sas version 20.100.00.00 loaded
[ 3.926131] mpt3sas version 04.100.00.00 loaded
[ 3.927043] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.928309] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
[ 3.929751] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 3.931021] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[ 3.932193] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[ 3.933233] iscsi: registered transport (cxgb3i)
[ 3.934013] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
[ 3.934901] iscsi: registered transport (cxgb4i)
[ 3.935687] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[ 3.936916] iscsi: registered transport (bnx2i)
[ 3.937903] iscsi: registered transport (be2iscsi)
[ 3.938709] In beiscsi_module_init, tt=ffffffff822a1f80
[ 3.939969] Error: Driver 'pata_platform' is already registered, aborting...
[ 3.941280] SSFDC read-only Flash Translation layer
[ 3.942123] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[ 3.943370] device id = 2440
[ 3.943864] device id = 2480
[ 3.944364] device id = 24c0
[ 3.944866] device id = 24d0
[ 3.945353] device id = 25a1
[ 3.945850] device id = 2670
[ 3.946490] slram: not enough parameters.
[ 3.948083] ftl_cs: FTL header not found.
[ 3.950915] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 3.953796] eql: Equalizer2002: Simon Janes (simon@xxxxxxx) and David S. Miller (davem@xxxxxxxxxx)
[ 3.956447] libphy: Fixed MDIO Bus: probed
[ 3.957409] vcan: Virtual CAN interface driver
[ 3.958143] slcan: serial line CAN interface driver
[ 3.958953] slcan: 10 dynamic interface channels.
[ 3.959731] CAN device driver interface
[ 3.960421] usbcore: registered new interface driver peak_usb
[ 3.961404] sja1000 CAN netdevice driver
[ 3.962059] sja1000_isa: insufficient parameters supplied
[ 3.963218] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 3.964124] Copyright (c) 2007 Atheros Corporation.
[ 3.965097] cnic: QLogic NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
[ 3.966886] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.62
[ 3.968261] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[ 3.969207] tehuti: Options: hw_csum
[ 3.969978] usbcore: registered new interface driver catc
[ 3.970886] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 3.972139] usbcore: registered new interface driver pegasus
[ 3.973082] hso: drivers/net/usb/hso.c: Option Wireless
[ 3.974273] usbcore: registered new interface driver hso
[ 3.975184] usbcore: registered new interface driver ipheth
[ 3.976124] Madge ATM Ambassador driver version 1.2.4
[ 3.977010] idt77252_init: at ffffffff8258bf24
[ 3.977784] Solos PCI Driver Version 1.04
[ 3.978499] adummy: version 1.0
[ 3.980131] aoe: AoE v85 initialised.
[ 3.980871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.981905] ohci-pci: OHCI PCI platform driver
[ 3.982690] ohci-platform: OHCI generic platform driver
[ 3.983677] usbcore: registered new interface driver cdc_acm
[ 3.984642] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.985967] usbcore: registered new interface driver usblp
[ 3.986904] usbcore: registered new interface driver cdc_wdm
[ 3.987878] usbcore: registered new interface driver usb-storage
[ 3.988920] usbcore: registered new interface driver ums-alauda
[ 3.989917] usbcore: registered new interface driver ums-datafab
[ 3.990926] usbcore: registered new interface driver ums-freecom
[ 3.991943] usbcore: registered new interface driver ums-jumpshot
[ 3.992987] usbcore: registered new interface driver ums-realtek
[ 3.994002] usbcore: registered new interface driver ums-sddr55
[ 3.995015] usbcore: registered new interface driver mdc800
[ 3.995935] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 3.997231] usbcore: registered new interface driver cypress_cy7c63
[ 3.998299] usbcore: registered new interface driver emi62 - firmware loader
[ 3.999500] usbcore: registered new interface driver iowarrior
[ 4.000504] usbcore: registered new interface driver usblcd
[ 4.001467] usbcore: registered new interface driver rio500
[ 4.002416] usbcore: registered new interface driver usbtest
[ 4.003397] usbcore: registered new interface driver usbsevseg
[ 4.004433] usbcore: registered new interface driver cxacru
[ 4.005390] usbcore: registered new interface driver ueagle-atm
[ 4.006764] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[ 4.007965] dummy_hcd dummy_hcd.0: Dummy host controller
[ 4.008880] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[ 4.010230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.011348] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.012551] usb usb1: Product: Dummy host controller
[ 4.013368] usb usb1: Manufacturer: Linux 4.0.0-rc1-00008-g3f45602 dummy_hcd
[ 4.014535] usb usb1: SerialNumber: dummy_hcd.0
[ 4.015712] hub 1-0:1.0: USB hub found
[ 4.016398] hub 1-0:1.0: 1 port detected
[ 4.017830] Number of LUNs=8
[ 4.018317] Mass Storage Function, version: 2009/09/11
[ 4.019176] LUN: removable file: (no medium)
[ 4.019897] Number of LUNs=1
[ 4.020403] no file given for LUN0
[ 4.021499] g_acm_ms dummy_udc.0: failed to start g_acm_ms: -22
[ 4.022590] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 4.024903] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.025902] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.027898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 4.029957] usbcore: registered new interface driver bcm5974
[ 4.032122] usbcore: registered new interface driver synaptics_usb
[ 4.033197] usbcore: registered new interface driver gtco
[ 4.034112] usbcore: registered new interface driver hanwang
[ 4.035156] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 4.036408] usbcore: registered new interface driver ati_remote2
[ 4.037645] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 4.038722] usbcore: registered new interface driver cm109
[ 4.039706] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 4.041911] i2c-parport-light: adapter type unspecified
[ 4.044135] IR NEC protocol handler initialized
[ 4.044900] IR SANYO protocol handler initialized
[ 4.045688] IR Sharp protocol handler initialized
[ 4.046474] IR XMP protocol handler initialized
[ 4.047257] usbcore: registered new interface driver imon
[ 4.048252] usbcore: registered new interface driver mceusb
[ 4.049269] Registered IR keymap rc-empty
[ 4.050143] input: rc-core loopback device as /devices/virtual/rc/rc0/input4
[ 4.051525] rc0: rc-core loopback device as /devices/virtual/rc/rc0
[ 4.052784] pps_ldisc: PPS line discipline registered
[ 4.053663] Driver for 1-wire Dallas network protocol.
[ 4.054664] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 4.055705] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 4.057935] applesmc: supported laptop not found!
[ 4.058719] applesmc: driver init failed (ret=-19)!
[ 4.060951] intel_powerclamp: Intel powerclamp does not run on family 15 model 6
[ 4.062201] acquirewdt: WDT driver for Acquire single board computer initialising
[ 4.063582] acquirewdt: I/O address 0x0043 already in use
[ 4.064507] acquirewdt: probe of acquirewdt failed with error -5
[ 4.065695] ib700wdt: WDT driver for IB700 single board computer initialising
[ 4.067162] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[ 4.068509] wafer5823wdt: I/O address 0x0443 already in use
[ 4.069432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.070367] sc1200wdt: build 20020303
[ 4.071005] sc1200wdt: io parameter must be specified
[ 4.071866] cpu5wdt: misc_register failed
[ 4.072650] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[ 4.075022] smsc37b787_wdt: Unable to register miscdev on minor 130
[ 4.076088] machzwd: MachZ ZF-Logic Watchdog driver initializing
[ 4.077083] machzwd: no ZF-Logic found
[ 4.078359] usbcore: registered new interface driver ft1000usb
[ 4.079528] ashmem: initialized
[ 4.080462] ozwpan ozwpan: Ozmo Devices WPAN
[ 4.081180] ozwpan ozwpan: new USB bus registered, assigned bus number 2
[ 4.082395] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.083513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.084733] usb usb2: Product: Ozmo Devices WPAN
[ 4.085503] usb usb2: Manufacturer: Linux 4.0.0-rc1-00008-g3f45602 Ozmo WPAN
[ 4.086664] usb usb2: SerialNumber: ozwpan
[ 4.087834] hub 2-0:1.0: USB hub found
[ 4.088534] hub 2-0:1.0: 8 ports detected
[ 4.090068] I2O subsystem v1.325
[ 4.090620] i2o: max drivers = 8
[ 4.091449] I2O Bus Adapter OSM v1.317
[ 4.092124] I2O Block Device OSM v1.325
[ 4.093056] I2O SCSI Peripheral OSM v1.316
[ 4.093782] I2O ProcFS OSM v1.316
[ 4.094393] msi_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 4.096144] compal_laptop: Motherboard not recognized (You could try the module's force-parameter)
[ 4.097642] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 4.098437] acer_wmi: No or unsupported WMI interface, unable to load
[ 4.099603] fujitsu_tablet: Unknown (using defaults)
[ 4.100565] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[ 4.102008] toshiba_acpi: Unable to create proc dir toshiba
[ 4.105477] usbcore: registered new interface driver snd-usb-audio
[ 4.106537] usbcore: registered new interface driver snd-ua101
[ 4.107531] usbcore: registered new interface driver snd-usb-us122l
[ 4.108613] usbcore: registered new interface driver snd-usb-caiaq
[ 4.109925] NET: Registered protocol family 26
[ 4.110678] Netfilter messages via NETLINK v0.30.
[ 4.111518] nfnl_acct: registering with nfnetlink.
[ 4.112479] xt_time: kernel timezone is -0000
[ 4.113212] ip_set: protocol 6
[ 4.113759] IPVS: Registered protocols (ESP)
[ 4.114485] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 4.115678] IPVS: Each connection entry needs 408 bytes at least
[ 4.116771] IPVS: Creating netns size=1608 id=0
[ 4.117549] IPVS: ipvs loaded.
[ 4.118065] IPVS: [lc] scheduler registered.
[ 4.118790] IPVS: [wlc] scheduler registered.
[ 4.119521] IPVS: [lblc] scheduler registered.
[ 4.120283] IPVS: [dh] scheduler registered.
[ 4.121002] IPVS: [sed] scheduler registered.
[ 4.121726] ipip: IPv4 over IPv4 tunneling driver
[ 4.122887] TCP: bic registered
[ 4.123420] TCP: cubic registered
[ 4.123974] TCP: westwood registered
[ 4.124639] TCP: hybla registered
[ 4.125189] TCP: htcp registered
[ 4.125738] TCP: vegas registered
[ 4.126287] TCP: veno registered
[ 4.126840] TCP: scalable registered
[ 4.127448] TCP: yeah registered
[ 4.127985] Initializing XFRM netlink socket
[ 4.128910] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this