[PATCH v2 10/10] ARM: berlin: rework chip and system controller nodes for BG2Q

From: Antoine Tenart
Date: Fri Mar 06 2015 - 10:06:30 EST


The chip and system controller nodes are now handled by the Berlin
controller mfd driver. Its sub-devices are then registered by the mfd
driver and let the drivers be probed properly, using their own
sub-nodes.

Rework the device tree to take this changes into account.

Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/berlin2q.dtsi | 70 ++++++++++++++++++++++++-----------------
1 file changed, 41 insertions(+), 29 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index be5397288d24..006d382d44ff 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -127,7 +127,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 14>;
+ resets = <&chip_rst 0x104 14>;
status = "disabled";
};

@@ -145,7 +145,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 12>;
+ resets = <&chip_rst 0x104 12>;
status = "disabled";
};

@@ -359,22 +359,30 @@
};
};

- chip: chip-control@ea0000 {
- compatible = "marvell,berlin2q-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ chip: chip-controller@ea0000 {
+ compatible = "marvell,berlin2q-chip-ctrl", "simple-mfd", "syscon";
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+ #clock-cells = <1>;
clocks = <&refclk>;
clock-names = "refclk";

- twsi0_pmux: twsi0-pmux {
- groups = "G6";
- function = "twsi0";
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-soc-pinctrl";
+
+ twsi0_pmux: twsi0-pmux {
+ groups = "G6";
+ function = "twsi0";
+ };
+
+ twsi1_pmux: twsi1-pmux {
+ groups = "G7";
+ function = "twsi1";
+ };
};

- twsi1_pmux: twsi1-pmux {
- groups = "G7";
- function = "twsi1";
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};

@@ -525,28 +533,32 @@
};
};

- sysctrl: pin-controller@d000 {
- compatible = "marvell,berlin2q-system-ctrl";
+ sysctrl: system-controller@d000 {
+ compatible = "marvell,berlin2q-system-ctrl", "simple-mfd", "syscon";
reg = <0xd000 0x100>;

- uart0_pmux: uart0-pmux {
- groups = "GSM12";
- function = "uart0";
- };
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-system-pinctrl";

- uart1_pmux: uart1-pmux {
- groups = "GSM14";
- function = "uart1";
- };
+ uart0_pmux: uart0-pmux {
+ groups = "GSM12";
+ function = "uart0";
+ };

- twsi2_pmux: twsi2-pmux {
- groups = "GSM13";
- function = "twsi2";
- };
+ uart1_pmux: uart1-pmux {
+ groups = "GSM14";
+ function = "uart1";
+ };
+
+ twsi2_pmux: twsi2-pmux {
+ groups = "GSM13";
+ function = "twsi2";
+ };

- twsi3_pmux: twsi3-pmux {
- groups = "GSM14";
- function = "twsi3";
+ twsi3_pmux: twsi3-pmux {
+ groups = "GSM14";
+ function = "twsi3";
+ };
};
};

--
2.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/