[PATCH v2 -next 13/14] serial: 8250_early: Use port->regshift

[Peter Hurley]

earlycon initializes struct uart_port::regshift to the correct
value for UPIO_MEM32 already. Use the port field rather than
hard-coded value.

This enables broader support for various i/o access methods in
8250 earlycon (eg., omap8250 earlycon).

Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_early.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index a2b4e58..53db31c 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -38,11 +38,13 @@
 
 unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
 {
+	offset <<= port->regshift;
+
 	switch (port->iotype) {
 	case UPIO_MEM:
 		return readb(port->membase + offset);
 	case UPIO_MEM32:
-		return readl(port->membase + (offset << 2));
+		return readl(port->membase + offset);
 	case UPIO_PORT:
 		return inb(port->iobase + offset);
 	default:
@@ -52,12 +54,14 @@ unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offse
 
 void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value)
 {
+	offset <<= port->regshift;
+
 	switch (port->iotype) {
 	case UPIO_MEM:
 		writeb(value, port->membase + offset);
 		break;
 	case UPIO_MEM32:
-		writel(value, port->membase + (offset << 2));
+		writel(value, port->membase + offset);
 		break;
 	case UPIO_PORT:
 		outb(value, port->iobase + offset);
-- 
2.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/