Re: [PATCH v2 5/6] watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND

[Pavel Machek]

On Sat 2015-03-07 12:06:45, Alexandre Belloni wrote:
> On 07/03/2015 at 11:39:39 +0100, Pavel Machek wrote :
> > > The Atmel watchdog can't be stopped once it's started. This is actually 
> > > very useful so we can reset if suspend or resume failed, the only 
> > > drawback is that you have to wake up from time to time (e.g. by using 
> > > the RTC/RTT) to clear the watchdog and then go back to sleep ASAP.
> > 
> > Yeah. So you do "echo mem > /sys/power/state", and few seconds/minutes
> > after watchdog kills the system. But you did not ask for dead system,
> > you asked for suspend.
> > 
> > And while that behaviour is useful for you, I don't think it is
> > exactly useful behaviour, nor it is the behaviour user would expect.
> > 
> 
> I think you misunderstood, that is exactly the expected behaviour. This
> is hardware defined. Once the watchdog is started, nobody can stop it.
> Trying to change the mode register will result in a reset of the
> SoC.

Well, it boils down to "what is stronger". Desire to suspend the
system, or desire to reboot the system.

It is "echo mem > state", not "echo reboot > state".

> It is documented in the datasheet and any user wanting another behaviour
> is out of luck.

Actaully, your platform should just refuse to enter suspend-to-RAM
when hw watchdog is enabled.

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/