[PATCH v0 10/11] intel_th: Add PTI output driver

[Alexander Shishkin]

Parallel Trace Interface (PTI) unit is a trace output device that sends
data over a PTI port.

The driver provides interfaces to configure bus width, bus clock divider
and mode. Tracing is enabled via output device's "active" attribute.

Signed-off-by: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
---
 .../ABI/testing/sysfs-bus-intel_th-devices-pti     |  24 ++
 drivers/intel_th/Kconfig                           |   9 +
 drivers/intel_th/Makefile                          |   3 +
 drivers/intel_th/pti.c                             | 252 +++++++++++++++++++++
 drivers/intel_th/pti.h                             |  29 +++
 5 files changed, 317 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti
 create mode 100644 drivers/intel_th/pti.c
 create mode 100644 drivers/intel_th/pti.h

diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti
new file mode 100644
index 0000000000..c179f41878
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti
@@ -0,0 +1,24 @@
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/mode
+Date:		February 2015
+KernelVersion:	4.1
+Contact:	Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
+Description:	(RW) Configure PTI output width. Currently supported values
+		are 4, 8, 12, 16.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/freerunning_clock
+Date:		February 2015
+KernelVersion:	4.1
+Contact:	Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
+Description:	(RW) 0: PTI trace clock acts as a strobe which only toggles
+		when there is trace data to send. 1: PTI trace clock is a
+		free-running clock.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/clock_divider
+Date:		February 2015
+KernelVersion:	4.1
+Contact:	Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
+Description:	(RW) Configure PTI port clock divider:
+		 - 0: Intel TH clock rate,
+		 - 1: 1/2 Intel TH clock rate,
+		 - 2: 1/4 Intel TH clock rate,
+		 - 3: 1/8 Intel TH clock rate.
diff --git a/drivers/intel_th/Kconfig b/drivers/intel_th/Kconfig
index cfb68c3f58..29287c6b18 100644
--- a/drivers/intel_th/Kconfig
+++ b/drivers/intel_th/Kconfig
@@ -54,6 +54,15 @@ config INTEL_TH_MSU
 
 	  Say Y here to enable MSU output device for Intel TH.
 
+config INTEL_TH_PTI
+        tristate "Intel Trace Hub PTI output"
+	help
+	  Parallel Trace Interface unit (PTI) is a trace output device
+	  of Intel TH architecture that facilitates STP trace output via
+	  a PTI port.
+
+	  Say Y to enable PTI output of Intel TH data.
+
 config INTEL_TH_DEBUG
 	bool "Intel Trace Hub debugging"
 	depends on DEBUG_FS
diff --git a/drivers/intel_th/Makefile b/drivers/intel_th/Makefile
index 4636757df2..81d42fe918 100644
--- a/drivers/intel_th/Makefile
+++ b/drivers/intel_th/Makefile
@@ -13,3 +13,6 @@ intel_th_sth-y			:= sth.o
 
 obj-$(CONFIG_INTEL_TH_MSU)	+= intel_th_msu.o
 intel_th_msu-y			:= msu.o
+
+obj-$(CONFIG_INTEL_TH_PTI)	+= intel_th_pti.o
+intel_th_pti-y			:= pti.o
diff --git a/drivers/intel_th/pti.c b/drivers/intel_th/pti.c
new file mode 100644
index 0000000000..599689fe69
--- /dev/null
+++ b/drivers/intel_th/pti.c
@@ -0,0 +1,252 @@
+/*
+ * Intel Trace Hub PTI output driver
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/sizes.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#include "intel_th.h"
+#include "pti.h"
+
+struct pti_device {
+	void __iomem		*base;
+	struct intel_th_device	*thdev;
+	unsigned int		mode;
+	unsigned int		freeclk;
+	unsigned int		clkdiv;
+	unsigned int		patgen;
+};
+
+/* map PTI widths to MODE settings of PTI_CTL register */
+static const unsigned int pti_mode[] = {
+	0, 4, 8, 0, 12, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0,
+};
+
+static int pti_width_mode(unsigned int width)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pti_mode); i++)
+		if (pti_mode[i] == width)
+			return i;
+
+	return -EINVAL;
+}
+
+static ssize_t mode_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", pti_mode[pti->mode]);
+}
+
+static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t size)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = pti_width_mode(val);
+	if (ret < 0)
+		return ret;
+
+	pti->mode = ret;
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(mode);
+
+static ssize_t
+freerunning_clock_show(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", pti->freeclk);
+}
+
+static ssize_t
+freerunning_clock_store(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t size)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	pti->freeclk = !!val;
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(freerunning_clock);
+
+static ssize_t
+clock_divider_show(struct device *dev, struct device_attribute *attr,
+		   char *buf)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", 1u << pti->clkdiv);
+}
+
+static ssize_t
+clock_divider_store(struct device *dev, struct device_attribute *attr,
+		    const char *buf, size_t size)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (!is_power_of_2(val) || val > 8 || !val)
+		return -EINVAL;
+
+	pti->clkdiv = val;
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(clock_divider);
+
+static struct attribute *pti_output_attrs[] = {
+	&dev_attr_mode.attr,
+	&dev_attr_freerunning_clock.attr,
+	&dev_attr_clock_divider.attr,
+	NULL,
+};
+
+static struct attribute_group pti_output_group = {
+	.attrs	= pti_output_attrs,
+};
+
+static int intel_th_pti_activate(struct intel_th_device *thdev)
+{
+	struct pti_device *pti = dev_get_drvdata(&thdev->dev);
+	u32 ctl = PTI_EN;
+
+	if (pti->patgen)
+		ctl |= pti->patgen << __ffs(PTI_PATGENMODE);
+	if (pti->freeclk)
+		ctl |= PTI_FCEN;
+	ctl |= pti->mode << __ffs(PTI_MODE);
+	ctl |= pti->clkdiv << __ffs(PTI_CLKDIV);
+
+	iowrite32(ctl, pti->base + REG_PTI_CTL);
+
+	intel_th_trace_enable(thdev);
+
+	return 0;
+}
+
+static void intel_th_pti_deactivate(struct intel_th_device *thdev)
+{
+	struct pti_device *pti = dev_get_drvdata(&thdev->dev);
+
+	intel_th_trace_disable(thdev);
+
+	iowrite32(0, pti->base + REG_PTI_CTL);
+}
+
+static void read_hw_config(struct pti_device *pti)
+{
+	u32 ctl = ioread32(pti->base + REG_PTI_CTL);
+
+	pti->mode	= (ctl & PTI_MODE) >> __ffs(PTI_MODE);
+	pti->clkdiv	= (ctl & PTI_CLKDIV) >> __ffs(PTI_CLKDIV);
+	pti->freeclk	= !!(ctl & PTI_FCEN);
+
+	if (!pti_mode[pti->mode])
+		pti->mode = pti_width_mode(4);
+	if (!pti->clkdiv)
+		pti->clkdiv = 1;
+}
+
+static int intel_th_pti_probe(struct intel_th_device *thdev)
+{
+	struct device *dev = &thdev->dev;
+	struct resource *res;
+	struct pti_device *pti;
+	void __iomem *base;
+	int ret;
+
+	res = intel_th_device_get_resource(thdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	base = devm_ioremap(dev, res->start, resource_size(res));
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	pti = devm_kzalloc(dev, sizeof(*pti), GFP_KERNEL);
+	if (!pti)
+		return -ENOMEM;
+
+	pti->thdev = thdev;
+	pti->base = base;
+
+	read_hw_config(pti);
+
+	ret = sysfs_create_group(&dev->kobj, &pti_output_group);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(dev, pti);
+
+	return 0;
+}
+
+static void intel_th_pti_remove(struct intel_th_device *thdev)
+{
+}
+
+static struct intel_th_driver intel_th_pti_driver = {
+	.probe	= intel_th_pti_probe,
+	.remove	= intel_th_pti_remove,
+	.activate	= intel_th_pti_activate,
+	.deactivate	= intel_th_pti_deactivate,
+	.driver	= {
+		.name	= "pti",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_driver(intel_th_pti_driver,
+	      intel_th_driver_register,
+	      intel_th_driver_unregister);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Trace Hub PTI output driver");
+MODULE_AUTHOR("Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>");
diff --git a/drivers/intel_th/pti.h b/drivers/intel_th/pti.h
new file mode 100644
index 0000000000..3084064731
--- /dev/null
+++ b/drivers/intel_th/pti.h
@@ -0,0 +1,29 @@
+/*
+ * Intel Trace Hub PTI output data structures
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __INTEL_TH_STH_H__
+#define __INTEL_TH_STH_H__
+
+enum {
+	REG_PTI_CTL	= 0x1c00,
+};
+
+#define PTI_EN		BIT(0)
+#define PTI_FCEN	BIT(1)
+#define PTI_MODE	0xf0
+#define PTI_CLKDIV	0x000f0000
+#define PTI_PATGENMODE	0x00f00000
+
+#endif /* __INTEL_TH_STH_H__ */
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/