[PATCH] iio: pressure: add support for MS5611 pressure and temperature sensor

[Tomasz Duszynski]

Add support for Measurement Specialities MS5611 pressure
and temperature sensor.

Signed-off-by: Tomasz Duszynski <tduszyns@xxxxxxxxx>
---
 drivers/iio/pressure/Kconfig       |  27 +++++
 drivers/iio/pressure/Makefile      |   4 +
 drivers/iio/pressure/ms5611.h      |  44 +++++++
 drivers/iio/pressure/ms5611_core.c | 239 +++++++++++++++++++++++++++++++++++++
 drivers/iio/pressure/ms5611_i2c.c  | 131 ++++++++++++++++++++
 drivers/iio/pressure/ms5611_spi.c  | 137 +++++++++++++++++++++
 6 files changed, 582 insertions(+)
 create mode 100644 drivers/iio/pressure/ms5611.h
 create mode 100644 drivers/iio/pressure/ms5611_core.c
 create mode 100644 drivers/iio/pressure/ms5611_i2c.c
 create mode 100644 drivers/iio/pressure/ms5611_spi.c

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index a3be537..fa62950 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -52,6 +52,33 @@ config MPL3115
           To compile this driver as a module, choose M here: the module
           will be called mpl3115.
 
+config MS5611
+	tristate "Measurement Specialities MS5611 pressure sensor driver"
+	help
+	  Say Y here to build support for the Measurement Specialities
+	  MS5611 pressure and temperature sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ms5611_core.
+
+config MS5611_I2C
+	tristate "support I2C bus connection"
+	depends on I2C && MS5611
+	help
+	  Say Y here to build I2C bus support for MS5611.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ms5611_i2c.
+
+config MS5611_SPI
+	tristate "support SPI bus connection"
+	depends on SPI_MASTER && MS5611
+	help
+	  Say Y here to build SPI bus support for MS5611.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ms5611_spi.
+
 config IIO_ST_PRESS
 	tristate "STMicroelectronics pressure sensor Driver"
 	depends on (I2C || SPI_MASTER) && SYSFS
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 88011f2..82f34f6 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -14,3 +14,7 @@ obj-$(CONFIG_T5403) += t5403.o
 
 obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
 obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
+
+obj-$(CONFIG_MS5611) += ms5611_core.o
+obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
+obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o
diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h
new file mode 100644
index 0000000..f4d44a5
--- /dev/null
+++ b/drivers/iio/pressure/ms5611.h
@@ -0,0 +1,44 @@
+/*
+ * MS5611 pressure and temperature sensor driver
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _MS5611_H
+#define _MS5611_H
+
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+
+#define MS5611_RESET			0x1e
+#define MS5611_READ_ADC			0x00
+#define MS5611_READ_PROM_WORD		0xA0
+#define MS5611_START_TEMP_CONV		0x58
+#define MS5611_START_PRESSURE_CONV	0x48
+
+#define MS5611_CONV_TIME_MIN		9040
+#define MS5611_CONV_TIME_MAX		10000
+
+#define MS5611_PROM_WORDS_NB		8
+
+struct ms5611_state {
+	void *client;
+	struct mutex lock;
+
+	int (*reset)(struct device *dev);
+	int (*read_prom_word)(struct device *dev, int index, u16 *word);
+	int (*read_adc_temp_and_pressure)(struct device *dev,
+					  s32 *temp, s32 *pressure);
+
+	u16 prom[MS5611_PROM_WORDS_NB];
+};
+
+int ms5611_probe(struct iio_dev *indio_dev, struct device *dev);
+int ms5611_remove(struct iio_dev *indio_dev);
+
+#endif /* _MS5611_H */
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
new file mode 100644
index 0000000..e4deda7
--- /dev/null
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -0,0 +1,239 @@
+/*
+ * MS5611 pressure and temperature sensor driver
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Data sheet:
+ *  http://www.meas-spec.com/downloads/MS5611-01BA03.pdf
+ *
+ */
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/delay.h>
+
+#include "ms5611.h"
+
+static bool ms5611_prom_is_valid(u16 *prom, size_t len)
+{
+	int i, j;
+	uint16_t crc = 0, crc_orig = prom[7] & 0x000F;
+
+	prom[7] &= 0xFF00;
+
+	for (i = 0; i < len * 2; i++) {
+		if (i % 2 == 1)
+			crc ^= prom[i >> 1] & 0x00FF;
+		else
+			crc ^= prom[i >> 1] >> 8;
+
+		for (j = 0; j < 8; j++) {
+			if (crc & 0x8000)
+				crc = (crc << 1) ^ 0x3000;
+			else
+				crc <<= 1;
+		}
+	}
+
+	crc = (crc >> 12) & 0x000F;
+	return crc_orig != 0x0000 && crc == crc_orig;
+}
+
+static int ms5611_read_prom(struct iio_dev *indio_dev)
+{
+	int ret, i;
+	struct ms5611_state *st = iio_priv(indio_dev);
+
+	for (i = 0; i < MS5611_PROM_WORDS_NB; i++) {
+		ret = st->read_prom_word(&indio_dev->dev, i, &st->prom[i]);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev,
+				"failed to read prom at %d\n", i);
+			return ret;
+		}
+	}
+
+	if (!ms5611_prom_is_valid(st->prom, MS5611_PROM_WORDS_NB)) {
+		dev_err(&indio_dev->dev, "PROM integrity check failed\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int ms5611_read_temp_and_pressure(struct iio_dev *indio_dev,
+					 s32 *temp, s32 *pressure)
+{
+	int ret;
+	s32 t, p;
+	s64 off, off2, sens, sens2, dt, t2 = 0;
+	struct ms5611_state *st = iio_priv(indio_dev);
+
+	ret = st->read_adc_temp_and_pressure(&indio_dev->dev, &t, &p);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev,
+			"failed to read temperature and pressure\n");
+		return ret;
+	}
+
+	dt = t - (st->prom[5] << 8);
+	off = ((s64)st->prom[2] << 16) + ((st->prom[4] * dt) >> 7);
+	sens = ((s64)st->prom[1] << 15) + ((st->prom[3] * dt) >> 8);
+
+	t = 2000 + ((st->prom[6] * dt) >> 23);
+	if (t < 2000) {
+		t2 = (dt * dt) >> 31;
+		off2 = (5 * (t - 2000) * (t - 2000)) >> 1;
+		sens2 = off2 >> 1;
+
+		if (t < -1500) {
+			s64 tmp = (t + 1500) * (t + 1500);
+
+			off2 += 7 * tmp;
+			sens2 += (11 * tmp) >> 1;
+		}
+
+		off -= off2;
+		sens -= sens2;
+	}
+
+	*temp = t - t2;
+	*pressure = (((p * sens) >> 21) - off) >> 15;
+	return 0;
+}
+
+static int ms5611_reset(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct ms5611_state *st = iio_priv(indio_dev);
+
+	ret = st->reset(&indio_dev->dev);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "failed to reset device\n");
+		return ret;
+	}
+
+	usleep_range(3000, 4000);
+	return 0;
+}
+
+static int ms5611_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	int ret;
+	s32 temp, pressure;
+	struct ms5611_state *st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		mutex_lock(&st->lock);
+		ret = ms5611_read_temp_and_pressure(indio_dev,
+						    &temp, &pressure);
+		mutex_unlock(&st->lock);
+		if (ret < 0)
+			break;
+
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = temp;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_PRESSURE:
+			*val = pressure;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = 0;
+			*val2 = 10000;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		case IIO_PRESSURE:
+			*val = 0;
+			*val2 = 1000;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct iio_chan_spec ms5611_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_SCALE)
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_SCALE)
+	}
+};
+
+static const struct iio_info ms5611_info = {
+	.read_raw = &ms5611_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int ms5611_init(struct iio_dev *indio_dev)
+{
+	int ret;
+
+	ret = ms5611_reset(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	ret = ms5611_read_prom(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int ms5611_probe(struct iio_dev *indio_dev, struct device *dev)
+{
+	int ret;
+	struct ms5611_state *st = iio_priv(indio_dev);
+
+	mutex_init(&st->lock);
+	indio_dev->dev.parent = dev;
+	indio_dev->name = dev->driver->name;
+	indio_dev->info = &ms5611_info;
+	indio_dev->channels = ms5611_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ms5611_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = ms5611_init(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	return iio_device_register(indio_dev);
+}
+EXPORT_SYMBOL(ms5611_probe);
+
+int ms5611_remove(struct iio_dev *indio_dev)
+{
+	iio_device_unregister(indio_dev);
+	return 0;
+}
+EXPORT_SYMBOL(ms5611_remove);
+
+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@xxxxxxxxx>");
+MODULE_DESCRIPTION("MS5611 core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
new file mode 100644
index 0000000..920fa78
--- /dev/null
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -0,0 +1,131 @@
+/*
+ * MS5611 pressure and temperature sensor driver (I2C bus)
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include "ms5611.h"
+
+static int ms5611_reset(struct device *dev)
+{
+	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	return i2c_smbus_write_byte(st->client, MS5611_RESET);
+}
+
+static int ms5611_read_prom_word(struct device *dev, int index, u16 *word)
+{
+	int ret;
+	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	ret = i2c_smbus_read_word_swapped(st->client,
+			MS5611_READ_PROM_WORD + (index << 1));
+	if (ret < 0)
+		return ret;
+
+	*word = ret;
+	return 0;
+}
+
+static int ms5611_read_adc(struct ms5611_state *st, s32 *val)
+{
+	int ret;
+	u8 buf[3];
+
+	ret = i2c_smbus_read_i2c_block_data(st->client, MS5611_READ_ADC,
+					    3, buf);
+	if (ret < 0)
+		return ret;
+
+	*val = (buf[0] << 16) | (buf[1] << 8) | buf[0];
+	return 0;
+}
+
+static int ms5611_read_adc_temp_and_pressure(struct device *dev,
+					     s32 *temp, s32 *pressure)
+{
+	int ret;
+	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	ret = i2c_smbus_write_byte(st->client, MS5611_START_TEMP_CONV);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
+
+	ret = ms5611_read_adc(st, temp);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte(st->client, MS5611_START_PRESSURE_CONV);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
+
+	ret = ms5611_read_adc(st, pressure);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ms5611_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct ms5611_state *st;
+	struct iio_dev *indio_dev;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE |
+				     I2C_FUNC_SMBUS_READ_WORD_DATA |
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+	st = iio_priv(indio_dev);
+	st->reset = ms5611_reset;
+	st->read_prom_word = ms5611_read_prom_word;
+	st->read_adc_temp_and_pressure = ms5611_read_adc_temp_and_pressure;
+	st->client = client;
+
+	return ms5611_probe(indio_dev, &client->dev);
+}
+
+static int ms5611_i2c_remove(struct i2c_client *client)
+{
+	return ms5611_remove(i2c_get_clientdata(client));
+}
+
+static const struct i2c_device_id ms5611_id[] = {
+	{ "ms5611", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ms5611_id);
+
+static struct i2c_driver ms5611_driver = {
+	.driver = {
+		.name = "ms5611",
+		.owner = THIS_MODULE,
+	},
+	.id_table = ms5611_id,
+	.probe = ms5611_i2c_probe,
+	.remove = ms5611_i2c_remove,
+};
+module_i2c_driver(ms5611_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@xxxxxxxxx>");
+MODULE_DESCRIPTION("MS5611 i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
new file mode 100644
index 0000000..eb3fee5
--- /dev/null
+++ b/drivers/iio/pressure/ms5611_spi.c
@@ -0,0 +1,137 @@
+/*
+ * MS5611 pressure and temperature sensor driver (SPI bus)
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "ms5611.h"
+
+static int ms5611_reset(struct device *dev)
+{
+	u8 cmd = MS5611_RESET;
+	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	return spi_write(st->client, &cmd, 1);
+}
+
+static int ms5611_read_prom_word(struct device *dev, int index, u16 *word)
+{
+	int ret;
+	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	ret = spi_w8r16be(st->client, MS5611_READ_PROM_WORD + (index << 1));
+	if (ret < 0)
+		return ret;
+
+	*word = ret;
+	return 0;
+}
+
+static int ms5611_read_adc(struct device *dev, s32 *val)
+{
+	int ret;
+	u8 buf[3];
+	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	buf[0] = MS5611_READ_ADC;
+
+	ret = spi_write_then_read(st->client, buf, 1, buf, 3);
+	if (ret < 0)
+		return ret;
+
+	*val = (buf[0] << 16) | (buf[1] << 8) | buf[0];
+	return 0;
+}
+
+static int ms5611_read_adc_temp_and_pressure(struct device *dev,
+					     s32 *temp, s32 *pressure)
+{
+	u8 cmd;
+	int ret;
+	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	cmd = MS5611_START_TEMP_CONV;
+	ret = spi_write(st->client, &cmd, 1);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
+
+	ret = ms5611_read_adc(dev, temp);
+	if (ret < 0)
+		return ret;
+
+	cmd = MS5611_START_PRESSURE_CONV;
+	ret = spi_write(st->client, &cmd, 1);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
+
+	ret = ms5611_read_adc(dev, pressure);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ms5611_spi_probe(struct spi_device *spi)
+{
+	int ret;
+	struct ms5611_state *st;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	spi->mode = SPI_MODE_0;
+	spi->max_speed_hz = 20000000;
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+	st = iio_priv(indio_dev);
+	st->reset = ms5611_reset;
+	st->read_prom_word = ms5611_read_prom_word;
+	st->read_adc_temp_and_pressure = ms5611_read_adc_temp_and_pressure;
+	st->client = spi;
+
+	return ms5611_probe(indio_dev, &spi->dev);
+}
+
+static int ms5611_spi_remove(struct spi_device *spi)
+{
+	return ms5611_remove(spi_get_drvdata(spi));
+}
+
+static const struct spi_device_id ms5611_id[] = {
+	{ "ms5611", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ms5611_id);
+
+static struct spi_driver ms5611_driver = {
+	.driver = {
+		.name = "ms5611",
+		.owner = THIS_MODULE,
+	},
+	.id_table = ms5611_id,
+	.probe = ms5611_spi_probe,
+	.remove = ms5611_spi_remove,
+};
+module_spi_driver(ms5611_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@xxxxxxxxx>");
+MODULE_DESCRIPTION("MS5611 spi driver");
+MODULE_LICENSE("GPL v2");
-- 
2.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/