[PATCH v5 1/2] power: rt5033_charger: Add RT5033 charger device driver

From: Beomho Seo
Date: Sun Mar 08 2015 - 21:23:36 EST

This patch add device driver of Richtek RT5033 PMIC. The driver support
switching charger. rt5033 charger provide three charging mode.
Three charging mode are pre charge mode, fast cahrge mode and constant voltage
mode. They are have vary charge rate, charge parameters. The charge parameters
can be controlled by i2c interface.

Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
Changes in v5
- none.
Changes in v4
- Change power supply type to POWER_SUPPLY_TYPE_MAINS.
Changes in v3
Changes in v2
- none

drivers/power/Kconfig | 8 +
drivers/power/Makefile | 1 +
drivers/power/rt5033_charger.c | 485 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 494 insertions(+)
create mode 100644 drivers/power/rt5033_charger.c

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 27b751b..67e9af7 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -418,6 +418,14 @@ config BATTERY_RT5033
The fuelgauge calculates and determines the battery state of charge
according to battery open circuit voltage.

+config CHARGER_RT5033
+ tristate "RT5033 battery charger support"
+ depends on MFD_RT5033
+ help
+ This adds support for battery charger in Richtek RT5033 PMIC.
+ The device supports pre-charge mode, fast charge mode and
+ constant voltage mode.
+
source "drivers/power/reset/Kconfig"

endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 36f9e0d..c5d72e0 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
obj-$(CONFIG_POWER_AVS) += avs/
+obj-$(CONFIG_POWER_RT5033) += rt5033_charger.o
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
obj-$(CONFIG_POWER_RESET) += reset/
diff --git a/drivers/power/rt5033_charger.c b/drivers/power/rt5033_charger.c
new file mode 100644
index 0000000..7f8f6c3
--- /dev/null
+++ b/drivers/power/rt5033_charger.c
@@ -0,0 +1,485 @@
+/*
+ * Battery charger driver for RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/mfd/rt5033.h>
+
+static int rt5033_get_charger_state(struct rt5033_charger *charger)
+{
+ struct regmap *regmap = charger->rt5033->regmap;
+ int state = POWER_SUPPLY_STATUS_UNKNOWN;
+ u32 reg_data;
+
+ if (!regmap)
+ return state;
+
+ regmap_read(regmap, RT5033_REG_CHG_STAT, &reg_data);
+
+ switch (reg_data & RT5033_CHG_STAT_MASK) {
+ case RT5033_CHG_STAT_DISCHARGING:
+ state = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case RT5033_CHG_STAT_CHARGING:
+ state = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case RT5033_CHG_STAT_FULL:
+ state = POWER_SUPPLY_STATUS_FULL;
+ break;
+ case RT5033_CHG_STAT_NOT_CHARGING:
+ state = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
+ return state;
+}
+
+static int rt5033_get_charger_type(struct rt5033_charger *charger)
+{
+ struct regmap *regmap = charger->rt5033->regmap;
+ int state = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ u32 reg_data;
+
+ regmap_read(regmap, RT5033_REG_CHG_STAT, &reg_data);
+
+ switch (reg_data & RT5033_CHG_STAT_TYPE_MASK) {
+ case RT5033_CHG_STAT_TYPE_FAST:
+ state = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case RT5033_CHG_STAT_TYPE_PRE:
+ state = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ }
+
+ return state;
+}
+
+static int rt5033_get_charger_current(struct rt5033_charger *charger,
+ enum power_supply_property psp)
+{
+ struct regmap *regmap = charger->rt5033->regmap;
+ unsigned int state, reg_data, data;
+
+ if (psp == POWER_SUPPLY_PROP_CURRENT_MAX)
+ return RT5033_CHG_MAX_CURRENT;
+
+ regmap_read(regmap, RT5033_REG_CHG_CTRL5, &reg_data);
+
+ state = (reg_data >> RT5033_CHGCTRL5_ICHG_SHIFT) & 0xf;
+
+ if (state > RT5033_CHG_MAX_CURRENT)
+ state = RT5033_CHG_MAX_CURRENT;
+
+ data = state * 100 + 700;
+
+ return data;
+}
+
+static int rt5033_get_charge_voltage(struct rt5033_charger *charger,
+ enum power_supply_property psp)
+{
+ struct regmap *regmap = charger->rt5033->regmap;
+ unsigned int state, reg_data, data;
+
+ if (psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX)
+ return RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX;
+
+ regmap_read(regmap, RT5033_REG_CHG_CTRL2, &reg_data);
+
+ state = reg_data >> 2;
+
+ data = RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN +
+ RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM * state;
+
+ if (data > RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX)
+ data = RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX;
+
+ return data;
+}
+
+static inline int rt5033_init_const_charge(struct rt5033_charger *psy)
+{
+ struct rt5033_charger_data *chg = psy->chg;
+ unsigned val;
+ int ret;
+ u8 reg_data;
+
+ /* Set Constant voltage mode */
+ if (chg->const_uvolt < RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN ||
+ chg->const_uvolt > RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX)
+ return -EINVAL;
+
+ if (chg->const_uvolt == RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN)
+ reg_data = 0x0;
+ else if (chg->const_uvolt == RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX)
+ reg_data = 0xfc;
+ else {
+ val = chg->const_uvolt;
+ val -= RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN;
+ val /= RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM;
+ reg_data = val;
+ }
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL2,
+ RT5033_CHGCTRL2_CV_MASK, reg_data << 2);
+ if (ret) {
+ dev_err(psy->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ /* Set end of charge current */
+ if (chg->eoc_uamp < RT5033_CHARGER_EOC_MIN ||
+ chg->eoc_uamp > RT5033_CHARGER_EOC_MAX)
+ return -EINVAL;
+
+ if (chg->eoc_uamp == RT5033_CHARGER_EOC_MIN)
+ reg_data = 0x1;
+ else if (chg->eoc_uamp == RT5033_CHARGER_EOC_MAX)
+ reg_data = 0x7;
+ else {
+ val = chg->eoc_uamp;
+ if (val < RT5033_CHARGER_EOC_REF) {
+ val -= RT5033_CHARGER_EOC_MIN;
+ val /= RT5033_CHARGER_EOC_STEP_NUM1;
+ reg_data = 0x01 + val;
+ } else if (val > RT5033_CHARGER_EOC_REF) {
+ val -= RT5033_CHARGER_EOC_REF;
+ val /= RT5033_CHARGER_EOC_STEP_NUM2;
+ reg_data = 0x04 + val;
+ } else {
+ reg_data = 0x04;
+ }
+ }
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL4,
+ RT5033_CHGCTRL4_EOC_MASK, reg_data);
+ if (ret) {
+ dev_err(psy->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int rt5033_init_fast_charge(struct rt5033_charger *psy)
+{
+ struct rt5033_charger_data *chg = psy->chg;
+ int ret;
+ u8 reg_data;
+
+ /* Set limit input current */
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL1,
+ RT5033_AICR_MODE_MASK, RT5033_AICR_2000_MODE);
+ if (ret) {
+ dev_err(psy->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ /* Set internal timer */
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL3,
+ RT5033_CHGCTRL3_TIMER_MASK | RT5033_CHGCTRL3_TIMER_EN_MASK,
+ RT5033_FAST_CHARGE_TIMER4 | RT5033_INT_TIMER_ENABLE);
+ if (ret) {
+ dev_err(psy->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ /* Set fast-charge mode Carging current */
+ if (chg->fast_uamp < RT5033_CHARGER_FAST_CURRENT_MIN ||
+ chg->fast_uamp > RT5033_CHARGER_FAST_CURRENT_MAX)
+ return -EINVAL;
+
+ if (chg->fast_uamp == RT5033_CHARGER_FAST_CURRENT_MIN)
+ reg_data = 0x0;
+ else if (chg->fast_uamp == RT5033_CHARGER_FAST_CURRENT_MAX)
+ reg_data = 0xd0;
+ else {
+ unsigned int val = chg->fast_uamp;
+
+ val -= RT5033_CHARGER_FAST_CURRENT_MIN;
+ val /= RT5033_CHARGER_FAST_CURRENT_STEP_NUM;
+ reg_data = 0x10 + val;
+ }
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL5,
+ RT5033_CHGCTRL5_ICHG_MASK, reg_data);
+ if (ret) {
+ dev_err(psy->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int rt5033_init_pre_charge(struct rt5033_charger *psy)
+{
+ struct rt5033_charger_data *chg = psy->chg;
+ int ret;
+ u8 reg_data;
+
+ /* Set pre-charge threshold voltage */
+ if (chg->pre_uvolt < RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN ||
+ chg->pre_uvolt > RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX)
+ return -EINVAL;
+
+ if (chg->pre_uvolt == RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN)
+ reg_data = 0x00;
+ else if (chg->pre_uvolt == RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX)
+ reg_data = 0x0f;
+ else {
+ unsigned int val = chg->pre_uvolt;
+
+ val -= RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN;
+ val /= RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM;
+ reg_data = 0x00 + val;
+ }
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL5,
+ RT5033_CHGCTRL5_VPREC_MASK, reg_data);
+ if (ret) {
+ dev_err(psy->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ /* Set pre-charge mode charging current */
+ if (chg->pre_uamp < RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN ||
+ chg->pre_uamp > RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX)
+ return -EINVAL;
+
+ if (chg->pre_uamp == RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN)
+ reg_data = 0x00;
+ else if (chg->pre_uamp == RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX)
+ reg_data = 0x18;
+ else {
+ unsigned int val = chg->pre_uamp;
+
+ val -= RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN;
+ val /= RT5033_CHARGER_PRE_CURRENT_STEP_NUM;
+ reg_data = 0x08 + val;
+ }
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL4,
+ RT5033_CHGCTRL4_IPREC_MASK, reg_data);
+ if (ret) {
+ dev_err(psy->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rt5033_charger_reg_init(struct rt5033_charger *psy)
+{
+ int ret = 0;
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL1,
+ RT5033_CHGCTRL1_MODE_MASK, RT5033_CHARGER_MODE);
+ if (ret) {
+ dev_err(psy->dev, "Failed to update charger mode.\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_RT_CTRL1,
+ RT5033_RT_CTRL1_UUG_MASK, RT5033_CHARGER_UUG_ENABLE);
+ if (ret) {
+ dev_err(psy->dev, "Failed to update rt ctrl register.\n");
+ return -EINVAL;
+ }
+
+ ret = rt5033_init_pre_charge(psy);
+ if (ret)
+ return ret;
+
+ ret = rt5033_init_fast_charge(psy);
+ if (ret)
+ return ret;
+
+ ret = rt5033_init_const_charge(psy);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL3,
+ RT5033_CHGCTRL3_CFO_EN_MASK, RT5033_CFO_ENABLE);
+ if (ret) {
+ dev_err(psy->dev, "Failed to set enable.\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(psy->rt5033->regmap, RT5033_REG_CHG_CTRL1,
+ RT5033_RT_HZ_MASK, RT5033_CHARGER_HZ_DISABLE);
+ if (ret) {
+ dev_err(psy->dev, "Failed to set high impedance mode.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property rt5033_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int rt5033_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rt5033_charger *charger = container_of(psy,
+ struct rt5033_charger, psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = rt5033_get_charger_state(charger);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = rt5033_get_charger_type(charger);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = rt5033_get_charger_current(charger, psp);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ val->intval = rt5033_get_charge_voltage(charger, psp);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = RT5033_CHARGER_MODEL;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = RT5033_MANUFACTURER;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static struct rt5033_charger_data *rt5033_charger_dt_init(
+ struct platform_device *pdev)
+{
+ struct rt5033_charger_data *chg;
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "No charger of_node\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return ERR_PTR(-ENOMEM);
+
+ ret = of_property_read_u32(np, "richtek,pre-uamp", &chg->pre_uamp);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = of_property_read_u32(np, "richtek,pre-threshold-uvolt",
+ &chg->pre_uvolt);
+ if (ret)
+ return ERR_PTR(ret);
+
+ /*
+ * Charging current is decided by external sensing register and
+ * regulated voltage. In this driver, external sensing regster value
+ * is 10 mili ohm
+ */
+ ret = of_property_read_u32(np, "richtek,fast-uamp", &chg->fast_uamp);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = of_property_read_u32(np, "richtek,const-uvolt",
+ &chg->const_uvolt);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = of_property_read_u32(np, "richtek,eoc-uamp", &chg->eoc_uamp);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return chg;
+}
+
+static int rt5033_charger_probe(struct platform_device *pdev)
+{
+ struct rt5033_charger *charger;
+ struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
+ int ret;
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, charger);
+ charger->dev = &pdev->dev;
+ charger->rt5033 = rt5033;
+
+ charger->chg = rt5033_charger_dt_init(pdev);
+ if (IS_ERR_OR_NULL(charger->chg))
+ return -ENODEV;
+
+ ret = rt5033_charger_reg_init(charger);
+ if (ret)
+ return ret;
+
+ charger->psy.name = "rt5033-charger",
+ charger->psy.type = POWER_SUPPLY_TYPE_MAINS,
+ charger->psy.properties = rt5033_charger_props,
+ charger->psy.num_properties = ARRAY_SIZE(rt5033_charger_props),
+ charger->psy.get_property = rt5033_charger_get_property,
+
+ ret = power_supply_register(&pdev->dev, &charger->psy);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register power supply\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rt5033_charger_remove(struct platform_device *pdev)
+{
+ struct rt5033_charger *charger = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&charger->psy);
+
+ return 0;
+}
+
+static const struct platform_device_id rt5033_charger_id[] = {
+ { "rt5033-charger", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, rt5033_charger_id);
+
+static struct platform_driver rt5033_charger_driver = {
+ .driver = {
+ .name = "rt5033-charger",
+ },
+ .probe = rt5033_charger_probe,
+ .remove = rt5033_charger_remove,
+ .id_table = rt5033_charger_id,
+};
+module_platform_driver(rt5033_charger_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 charger driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/