[PATCH] mfd: arizona: Update DT binding documentation for inmode
From: Charles Keepax
Date: Mon Mar 09 2015 - 10:50:40 EST
Update the DT binding documentation for the inmode binding to mention
the new defines and clarify the text slightly.
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/arizona.txt | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 7665aa95..cbcd2d6 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -49,12 +49,11 @@ Optional properties:
a value that is out of range for a 16 bit register then the chip default
will be used. If present exactly five values must be specified.
- - wlf,inmode : A list of INn_MODE register values, where n is the number
- of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
- 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
- If present, values must be specified less than or equal to the number of
- input singals. If values less than the number of input signals, elements
- that has not been specifed are set to 0 by default.
+ - wlf,inmode : A list of the mode for each input. Each input can be set to
+ differential, single-ended or a digital microphone. Defines for all values
+ (ARIZONA_INMODE_xxxx) are located in <dt-bindings/mfd/arizona.txt>. If
+ present, the number of values should be less than or equal to the number
+ of inputs, unspecified inputs will use the chip default.
- wlf,dmic-ref : DMIC reference voltage source for each input, can be
selected from either MICVDD or one of the MICBIAS's, defines
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/