[PATCH 1/2] extcon: Rename extcon core driver

[Chanwoo Choi]

This patch renames the extcon core driver from extcon-class.c
to extcon.c because '-class' postfix is not necessary.

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
 drivers/extcon/Makefile       |    2 +-
 drivers/extcon/extcon-class.c | 1038 -----------------------------------------
 drivers/extcon/extcon.c       | 1038 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1039 insertions(+), 1039 deletions(-)
 delete mode 100644 drivers/extcon/extcon-class.c
 create mode 100644 drivers/extcon/extcon.c

diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index e1eb2d5..9204114 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -2,7 +2,7 @@
 # Makefile for external connector class (extcon) devices
 #
 
-obj-$(CONFIG_EXTCON)		+= extcon-class.o
+obj-$(CONFIG_EXTCON)		+= extcon.o
 obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
 obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
deleted file mode 100644
index 8319f25..0000000
--- a/drivers/extcon/extcon-class.c
+++ /dev/null
@@ -1,1038 +0,0 @@
-/*
- *  drivers/extcon/extcon_class.c
- *
- *  External connector (extcon) class driver
- *
- * Copyright (C) 2012 Samsung Electronics
- * Author: Donggeun Kim <dg77.kim@xxxxxxxxxxx>
- * Author: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
- *
- * based on android/drivers/switch/switch_class.c
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@xxxxxxxxxxx>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include <linux/extcon.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-
-/*
- * extcon_cable_name suggests the standard cable names for commonly used
- * cable types.
- *
- * However, please do not use extcon_cable_name directly for extcon_dev
- * struct's supported_cable pointer unless your device really supports
- * every single port-type of the following cable names. Please choose cable
- * names that are actually used in your extcon device.
- */
-const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
-	[EXTCON_USB]		= "USB",
-	[EXTCON_USB_HOST]	= "USB-Host",
-	[EXTCON_TA]		= "TA",
-	[EXTCON_FAST_CHARGER]	= "Fast-charger",
-	[EXTCON_SLOW_CHARGER]	= "Slow-charger",
-	[EXTCON_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_HDMI]		= "HDMI",
-	[EXTCON_MHL]		= "MHL",
-	[EXTCON_DVI]		= "DVI",
-	[EXTCON_VGA]		= "VGA",
-	[EXTCON_DOCK]		= "Dock",
-	[EXTCON_LINE_IN]	= "Line-in",
-	[EXTCON_LINE_OUT]	= "Line-out",
-	[EXTCON_MIC_IN]		= "Microphone",
-	[EXTCON_HEADPHONE_OUT]	= "Headphone",
-	[EXTCON_SPDIF_IN]	= "SPDIF-in",
-	[EXTCON_SPDIF_OUT]	= "SPDIF-out",
-	[EXTCON_VIDEO_IN]	= "Video-in",
-	[EXTCON_VIDEO_OUT]	= "Video-out",
-	[EXTCON_MECHANICAL]	= "Mechanical",
-};
-
-static struct class *extcon_class;
-#if defined(CONFIG_ANDROID)
-static struct class_compat *switch_class;
-#endif /* CONFIG_ANDROID */
-
-static LIST_HEAD(extcon_dev_list);
-static DEFINE_MUTEX(extcon_dev_list_lock);
-
-/**
- * check_mutually_exclusive - Check if new_state violates mutually_exclusive
- *			      condition.
- * @edev:	the extcon device
- * @new_state:	new cable attach status for @edev
- *
- * Returns 0 if nothing violates. Returns the index + 1 for the first
- * violated condition.
- */
-static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
-{
-	int i = 0;
-
-	if (!edev->mutually_exclusive)
-		return 0;
-
-	for (i = 0; edev->mutually_exclusive[i]; i++) {
-		int weight;
-		u32 correspondants = new_state & edev->mutually_exclusive[i];
-
-		/* calculate the total number of bits set */
-		weight = hweight32(correspondants);
-		if (weight > 1)
-			return i + 1;
-	}
-
-	return 0;
-}
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	int i, count = 0;
-	struct extcon_dev *edev = dev_get_drvdata(dev);
-
-	if (edev->print_state) {
-		int ret = edev->print_state(edev, buf);
-
-		if (ret >= 0)
-			return ret;
-		/* Use default if failed */
-	}
-
-	if (edev->max_supported == 0)
-		return sprintf(buf, "%u\n", edev->state);
-
-	for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
-		if (!edev->supported_cable[i])
-			break;
-		count += sprintf(buf + count, "%s=%d\n",
-				 edev->supported_cable[i],
-				 !!(edev->state & (1 << i)));
-	}
-
-	return count;
-}
-
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	u32 state;
-	ssize_t ret = 0;
-	struct extcon_dev *edev = dev_get_drvdata(dev);
-
-	ret = sscanf(buf, "0x%x", &state);
-	if (ret == 0)
-		ret = -EINVAL;
-	else
-		ret = extcon_set_state(edev, state);
-
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-static DEVICE_ATTR_RW(state);
-
-static ssize_t name_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct extcon_dev *edev = dev_get_drvdata(dev);
-
-	/* Optional callback given by the user */
-	if (edev->print_name) {
-		int ret = edev->print_name(edev, buf);
-		if (ret >= 0)
-			return ret;
-	}
-
-	return sprintf(buf, "%s\n", dev_name(&edev->dev));
-}
-static DEVICE_ATTR_RO(name);
-
-static ssize_t cable_name_show(struct device *dev,
-			       struct device_attribute *attr, char *buf)
-{
-	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
-						  attr_name);
-
-	return sprintf(buf, "%s\n",
-		       cable->edev->supported_cable[cable->cable_index]);
-}
-
-static ssize_t cable_state_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
-						  attr_state);
-
-	return sprintf(buf, "%d\n",
-		       extcon_get_cable_state_(cable->edev,
-					       cable->cable_index));
-}
-
-/**
- * extcon_update_state() - Update the cable attach states of the extcon device
- *			   only for the masked bits.
- * @edev:	the extcon device
- * @mask:	the bit mask to designate updated bits.
- * @state:	new cable attach status for @edev
- *
- * Changing the state sends uevent with environment variable containing
- * the name of extcon device (envp[0]) and the state output (envp[1]).
- * Tizen uses this format for extcon device to get events from ports.
- * Android uses this format as well.
- *
- * Note that the notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
- */
-int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
-{
-	char name_buf[120];
-	char state_buf[120];
-	char *prop_buf;
-	char *envp[3];
-	int env_offset = 0;
-	int length;
-	unsigned long flags;
-
-	spin_lock_irqsave(&edev->lock, flags);
-
-	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
-		u32 old_state = edev->state;
-
-		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
-						   (state & mask))) {
-			spin_unlock_irqrestore(&edev->lock, flags);
-			return -EPERM;
-		}
-
-		edev->state &= ~mask;
-		edev->state |= state & mask;
-
-		raw_notifier_call_chain(&edev->nh, old_state, edev);
-		/* This could be in interrupt handler */
-		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
-		if (prop_buf) {
-			length = name_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(name_buf, sizeof(name_buf),
-					"NAME=%s", prop_buf);
-				envp[env_offset++] = name_buf;
-			}
-			length = state_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(state_buf, sizeof(state_buf),
-					"STATE=%s", prop_buf);
-				envp[env_offset++] = state_buf;
-			}
-			envp[env_offset] = NULL;
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
-
-			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
-			free_page((unsigned long)prop_buf);
-		} else {
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
-
-			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
-			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
-		}
-	} else {
-		/* No changes */
-		spin_unlock_irqrestore(&edev->lock, flags);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(extcon_update_state);
-
-/**
- * extcon_set_state() - Set the cable attach states of the extcon device.
- * @edev:	the extcon device
- * @state:	new cable attach status for @edev
- *
- * Note that notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
- */
-int extcon_set_state(struct extcon_dev *edev, u32 state)
-{
-	return extcon_update_state(edev, 0xffffffff, state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_state);
-
-/**
- * extcon_find_cable_index() - Get the cable index based on the cable name.
- * @edev:	the extcon device that has the cable.
- * @cable_name:	cable name to be searched.
- *
- * Note that accessing a cable state based on cable_index is faster than
- * cable_name because using cable_name induces a loop with strncmp().
- * Thus, when get/set_cable_state is repeatedly used, using cable_index
- * is recommended.
- */
-int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
-{
-	int i;
-
-	if (edev->supported_cable) {
-		for (i = 0; edev->supported_cable[i]; i++) {
-			if (!strncmp(edev->supported_cable[i],
-				cable_name, CABLE_NAME_MAX))
-				return i;
-		}
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(extcon_find_cable_index);
-
-/**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @index:	cable index that can be retrieved by extcon_find_cable_index().
- */
-int extcon_get_cable_state_(struct extcon_dev *edev, int index)
-{
-	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
-		return -EINVAL;
-
-	return !!(edev->state & (1 << index));
-}
-EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
-
-/**
- * extcon_get_cable_state() - Get the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @cable_name:	cable name.
- *
- * Note that this is slower than extcon_get_cable_state_.
- */
-int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
-{
-	return extcon_get_cable_state_(edev, extcon_find_cable_index
-						(edev, cable_name));
-}
-EXPORT_SYMBOL_GPL(extcon_get_cable_state);
-
-/**
- * extcon_set_cable_state_() - Set the status of a specific cable.
- * @edev:		the extcon device that has the cable.
- * @index:		cable index that can be retrieved by
- *			extcon_find_cable_index().
- * @cable_state:	the new cable status. The default semantics is
- *			true: attached / false: detached.
- */
-int extcon_set_cable_state_(struct extcon_dev *edev,
-			int index, bool cable_state)
-{
-	u32 state;
-
-	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
-		return -EINVAL;
-
-	state = cable_state ? (1 << index) : 0;
-	return extcon_update_state(edev, 1 << index, state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
-
-/**
- * extcon_set_cable_state() - Set the status of a specific cable.
- * @edev:		the extcon device that has the cable.
- * @cable_name:		cable name.
- * @cable_state:	the new cable status. The default semantics is
- *			true: attached / false: detached.
- *
- * Note that this is slower than extcon_set_cable_state_.
- */
-int extcon_set_cable_state(struct extcon_dev *edev,
-			const char *cable_name, bool cable_state)
-{
-	return extcon_set_cable_state_(edev, extcon_find_cable_index
-					(edev, cable_name), cable_state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_cable_state);
-
-/**
- * extcon_get_extcon_dev() - Get the extcon device instance from the name
- * @extcon_name:	The extcon name provided with extcon_dev_register()
- */
-struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
-{
-	struct extcon_dev *sd;
-
-	mutex_lock(&extcon_dev_list_lock);
-	list_for_each_entry(sd, &extcon_dev_list, entry) {
-		if (!strcmp(sd->name, extcon_name))
-			goto out;
-	}
-	sd = NULL;
-out:
-	mutex_unlock(&extcon_dev_list_lock);
-	return sd;
-}
-EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
-
-static int _call_per_cable(struct notifier_block *nb, unsigned long val,
-			   void *ptr)
-{
-	struct extcon_specific_cable_nb *obj = container_of(nb,
-			struct extcon_specific_cable_nb, internal_nb);
-	struct extcon_dev *edev = ptr;
-
-	if ((val & (1 << obj->cable_index)) !=
-	    (edev->state & (1 << obj->cable_index))) {
-		bool cable_state = true;
-
-		obj->previous_value = val;
-
-		if (val & (1 << obj->cable_index))
-			cable_state = false;
-
-		return obj->user_nb->notifier_call(obj->user_nb,
-				cable_state, ptr);
-	}
-
-	return NOTIFY_OK;
-}
-
-/**
- * extcon_register_interest() - Register a notifier for a state change of a
- *				specific cable, not an entier set of cables of a
- *				extcon device.
- * @obj:		an empty extcon_specific_cable_nb object to be returned.
- * @extcon_name:	the name of extcon device.
- *			if NULL, extcon_register_interest will register
- *			every cable with the target cable_name given.
- * @cable_name:		the target cable name.
- * @nb:			the notifier block to get notified.
- *
- * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
- * the struct for you.
- *
- * extcon_register_interest is a helper function for those who want to get
- * notification for a single specific cable's status change. If a user wants
- * to get notification for any changes of all cables of a extcon device,
- * he/she should use the general extcon_register_notifier().
- *
- * Note that the second parameter given to the callback of nb (val) is
- * "old_state", not the current state. The current state can be retrieved
- * by looking at the third pameter (edev pointer)'s state value.
- */
-int extcon_register_interest(struct extcon_specific_cable_nb *obj,
-			     const char *extcon_name, const char *cable_name,
-			     struct notifier_block *nb)
-{
-	if (!obj || !cable_name || !nb)
-		return -EINVAL;
-
-	if (extcon_name) {
-		obj->edev = extcon_get_extcon_dev(extcon_name);
-		if (!obj->edev)
-			return -ENODEV;
-
-		obj->cable_index = extcon_find_cable_index(obj->edev,
-							  cable_name);
-		if (obj->cable_index < 0)
-			return obj->cable_index;
-
-		obj->user_nb = nb;
-
-		obj->internal_nb.notifier_call = _call_per_cable;
-
-		return raw_notifier_chain_register(&obj->edev->nh,
-						  &obj->internal_nb);
-	} else {
-		struct class_dev_iter iter;
-		struct extcon_dev *extd;
-		struct device *dev;
-
-		if (!extcon_class)
-			return -ENODEV;
-		class_dev_iter_init(&iter, extcon_class, NULL, NULL);
-		while ((dev = class_dev_iter_next(&iter))) {
-			extd = dev_get_drvdata(dev);
-
-			if (extcon_find_cable_index(extd, cable_name) < 0)
-				continue;
-
-			class_dev_iter_exit(&iter);
-			return extcon_register_interest(obj, extd->name,
-						cable_name, nb);
-		}
-
-		return -ENODEV;
-	}
-}
-EXPORT_SYMBOL_GPL(extcon_register_interest);
-
-/**
- * extcon_unregister_interest() - Unregister the notifier registered by
- *				  extcon_register_interest().
- * @obj:	the extcon_specific_cable_nb object returned by
- *		extcon_register_interest().
- */
-int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
-{
-	if (!obj)
-		return -EINVAL;
-
-	return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
-}
-EXPORT_SYMBOL_GPL(extcon_unregister_interest);
-
-/**
- * extcon_register_notifier() - Register a notifiee to get notified by
- *				any attach status changes from the extcon.
- * @edev:	the extcon device.
- * @nb:		a notifier block to be registered.
- *
- * Note that the second parameter given to the callback of nb (val) is
- * "old_state", not the current state. The current state can be retrieved
- * by looking at the third pameter (edev pointer)'s state value.
- */
-int extcon_register_notifier(struct extcon_dev *edev,
-			struct notifier_block *nb)
-{
-	return raw_notifier_chain_register(&edev->nh, nb);
-}
-EXPORT_SYMBOL_GPL(extcon_register_notifier);
-
-/**
- * extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
- * @edev:	the extcon device.
- * @nb:		a registered notifier block to be unregistered.
- */
-int extcon_unregister_notifier(struct extcon_dev *edev,
-			struct notifier_block *nb)
-{
-	return raw_notifier_chain_unregister(&edev->nh, nb);
-}
-EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
-
-static struct attribute *extcon_attrs[] = {
-	&dev_attr_state.attr,
-	&dev_attr_name.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(extcon);
-
-static int create_extcon_class(void)
-{
-	if (!extcon_class) {
-		extcon_class = class_create(THIS_MODULE, "extcon");
-		if (IS_ERR(extcon_class))
-			return PTR_ERR(extcon_class);
-		extcon_class->dev_groups = extcon_groups;
-
-#if defined(CONFIG_ANDROID)
-		switch_class = class_compat_register("switch");
-		if (WARN(!switch_class, "cannot allocate"))
-			return -ENOMEM;
-#endif /* CONFIG_ANDROID */
-	}
-
-	return 0;
-}
-
-static void extcon_dev_release(struct device *dev)
-{
-}
-
-static const char *muex_name = "mutually_exclusive";
-static void dummy_sysfs_dev_release(struct device *dev)
-{
-}
-
-/*
- * extcon_dev_allocate() - Allocate the memory of extcon device.
- * @supported_cable:	Array of supported cable names ending with NULL.
- *			If supported_cable is NULL, cable name related APIs
- *			are disabled.
- *
- * This function allocates the memory for extcon device without allocating
- * memory in each extcon provider driver and initialize default setting for
- * extcon device.
- *
- * Return the pointer of extcon device if success or ERR_PTR(err) if fail
- */
-struct extcon_dev *extcon_dev_allocate(const char **supported_cable)
-{
-	struct extcon_dev *edev;
-
-	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
-	if (!edev)
-		return ERR_PTR(-ENOMEM);
-
-	edev->max_supported = 0;
-	edev->supported_cable = supported_cable;
-
-	return edev;
-}
-
-/*
- * extcon_dev_free() - Free the memory of extcon device.
- * @edev:	the extcon device to free
- */
-void extcon_dev_free(struct extcon_dev *edev)
-{
-	kfree(edev);
-}
-EXPORT_SYMBOL_GPL(extcon_dev_free);
-
-static int devm_extcon_dev_match(struct device *dev, void *res, void *data)
-{
-	struct extcon_dev **r = res;
-
-	if (WARN_ON(!r || !*r))
-		return 0;
-
-	return *r == data;
-}
-
-static void devm_extcon_dev_release(struct device *dev, void *res)
-{
-	extcon_dev_free(*(struct extcon_dev **)res);
-}
-
-/**
- * devm_extcon_dev_allocate - Allocate managed extcon device
- * @dev:		device owning the extcon device being created
- * @supported_cable:	Array of supported cable names ending with NULL.
- *			If supported_cable is NULL, cable name related APIs
- *			are disabled.
- *
- * This function manages automatically the memory of extcon device using device
- * resource management and simplify the control of freeing the memory of extcon
- * device.
- *
- * Returns the pointer memory of allocated extcon_dev if success
- * or ERR_PTR(err) if fail
- */
-struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
-					    const char **supported_cable)
-{
-	struct extcon_dev **ptr, *edev;
-
-	ptr = devres_alloc(devm_extcon_dev_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return ERR_PTR(-ENOMEM);
-
-	edev = extcon_dev_allocate(supported_cable);
-	if (IS_ERR(edev)) {
-		devres_free(ptr);
-		return edev;
-	}
-
-	edev->dev.parent = dev;
-
-	*ptr = edev;
-	devres_add(dev, ptr);
-
-	return edev;
-}
-EXPORT_SYMBOL_GPL(devm_extcon_dev_allocate);
-
-void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev)
-{
-	WARN_ON(devres_release(dev, devm_extcon_dev_release,
-			       devm_extcon_dev_match, edev));
-}
-EXPORT_SYMBOL_GPL(devm_extcon_dev_free);
-
-/**
- * extcon_dev_register() - Register a new extcon device
- * @edev	: the new extcon device (should be allocated before calling)
- *
- * Among the members of edev struct, please set the "user initializing data"
- * in any case and set the "optional callbacks" if required. However, please
- * do not set the values of "internal data", which are initialized by
- * this function.
- */
-int extcon_dev_register(struct extcon_dev *edev)
-{
-	int ret, index = 0;
-
-	if (!extcon_class) {
-		ret = create_extcon_class();
-		if (ret < 0)
-			return ret;
-	}
-
-	if (edev->supported_cable) {
-		/* Get size of array */
-		for (index = 0; edev->supported_cable[index]; index++)
-			;
-		edev->max_supported = index;
-	} else {
-		edev->max_supported = 0;
-	}
-
-	if (index > SUPPORTED_CABLE_MAX) {
-		dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n");
-		return -EINVAL;
-	}
-
-	edev->dev.class = extcon_class;
-	edev->dev.release = extcon_dev_release;
-
-	edev->name = edev->name ? edev->name : dev_name(edev->dev.parent);
-	if (IS_ERR_OR_NULL(edev->name)) {
-		dev_err(&edev->dev,
-			"extcon device name is null\n");
-		return -EINVAL;
-	}
-	dev_set_name(&edev->dev, "%s", edev->name);
-
-	if (edev->max_supported) {
-		char buf[10];
-		char *str;
-		struct extcon_cable *cable;
-
-		edev->cables = kzalloc(sizeof(struct extcon_cable) *
-				       edev->max_supported, GFP_KERNEL);
-		if (!edev->cables) {
-			ret = -ENOMEM;
-			goto err_sysfs_alloc;
-		}
-		for (index = 0; index < edev->max_supported; index++) {
-			cable = &edev->cables[index];
-
-			snprintf(buf, 10, "cable.%d", index);
-			str = kzalloc(sizeof(char) * (strlen(buf) + 1),
-				      GFP_KERNEL);
-			if (!str) {
-				for (index--; index >= 0; index--) {
-					cable = &edev->cables[index];
-					kfree(cable->attr_g.name);
-				}
-				ret = -ENOMEM;
-
-				goto err_alloc_cables;
-			}
-			strcpy(str, buf);
-
-			cable->edev = edev;
-			cable->cable_index = index;
-			cable->attrs[0] = &cable->attr_name.attr;
-			cable->attrs[1] = &cable->attr_state.attr;
-			cable->attrs[2] = NULL;
-			cable->attr_g.name = str;
-			cable->attr_g.attrs = cable->attrs;
-
-			sysfs_attr_init(&cable->attr_name.attr);
-			cable->attr_name.attr.name = "name";
-			cable->attr_name.attr.mode = 0444;
-			cable->attr_name.show = cable_name_show;
-
-			sysfs_attr_init(&cable->attr_state.attr);
-			cable->attr_state.attr.name = "state";
-			cable->attr_state.attr.mode = 0444;
-			cable->attr_state.show = cable_state_show;
-		}
-	}
-
-	if (edev->max_supported && edev->mutually_exclusive) {
-		char buf[80];
-		char *name;
-
-		/* Count the size of mutually_exclusive array */
-		for (index = 0; edev->mutually_exclusive[index]; index++)
-			;
-
-		edev->attrs_muex = kzalloc(sizeof(struct attribute *) *
-					   (index + 1), GFP_KERNEL);
-		if (!edev->attrs_muex) {
-			ret = -ENOMEM;
-			goto err_muex;
-		}
-
-		edev->d_attrs_muex = kzalloc(sizeof(struct device_attribute) *
-					     index, GFP_KERNEL);
-		if (!edev->d_attrs_muex) {
-			ret = -ENOMEM;
-			kfree(edev->attrs_muex);
-			goto err_muex;
-		}
-
-		for (index = 0; edev->mutually_exclusive[index]; index++) {
-			sprintf(buf, "0x%x", edev->mutually_exclusive[index]);
-			name = kzalloc(sizeof(char) * (strlen(buf) + 1),
-				       GFP_KERNEL);
-			if (!name) {
-				for (index--; index >= 0; index--) {
-					kfree(edev->d_attrs_muex[index].attr.
-					      name);
-				}
-				kfree(edev->d_attrs_muex);
-				kfree(edev->attrs_muex);
-				ret = -ENOMEM;
-				goto err_muex;
-			}
-			strcpy(name, buf);
-			sysfs_attr_init(&edev->d_attrs_muex[index].attr);
-			edev->d_attrs_muex[index].attr.name = name;
-			edev->d_attrs_muex[index].attr.mode = 0000;
-			edev->attrs_muex[index] = &edev->d_attrs_muex[index]
-							.attr;
-		}
-		edev->attr_g_muex.name = muex_name;
-		edev->attr_g_muex.attrs = edev->attrs_muex;
-
-	}
-
-	if (edev->max_supported) {
-		edev->extcon_dev_type.groups =
-			kzalloc(sizeof(struct attribute_group *) *
-				(edev->max_supported + 2), GFP_KERNEL);
-		if (!edev->extcon_dev_type.groups) {
-			ret = -ENOMEM;
-			goto err_alloc_groups;
-		}
-
-		edev->extcon_dev_type.name = dev_name(&edev->dev);
-		edev->extcon_dev_type.release = dummy_sysfs_dev_release;
-
-		for (index = 0; index < edev->max_supported; index++)
-			edev->extcon_dev_type.groups[index] =
-				&edev->cables[index].attr_g;
-		if (edev->mutually_exclusive)
-			edev->extcon_dev_type.groups[index] =
-				&edev->attr_g_muex;
-
-		edev->dev.type = &edev->extcon_dev_type;
-	}
-
-	ret = device_register(&edev->dev);
-	if (ret) {
-		put_device(&edev->dev);
-		goto err_dev;
-	}
-#if defined(CONFIG_ANDROID)
-	if (switch_class)
-		ret = class_compat_create_link(switch_class, &edev->dev, NULL);
-#endif /* CONFIG_ANDROID */
-
-	spin_lock_init(&edev->lock);
-
-	RAW_INIT_NOTIFIER_HEAD(&edev->nh);
-
-	dev_set_drvdata(&edev->dev, edev);
-	edev->state = 0;
-
-	mutex_lock(&extcon_dev_list_lock);
-	list_add(&edev->entry, &extcon_dev_list);
-	mutex_unlock(&extcon_dev_list_lock);
-
-	return 0;
-
-err_dev:
-	if (edev->max_supported)
-		kfree(edev->extcon_dev_type.groups);
-err_alloc_groups:
-	if (edev->max_supported && edev->mutually_exclusive) {
-		for (index = 0; edev->mutually_exclusive[index]; index++)
-			kfree(edev->d_attrs_muex[index].attr.name);
-		kfree(edev->d_attrs_muex);
-		kfree(edev->attrs_muex);
-	}
-err_muex:
-	for (index = 0; index < edev->max_supported; index++)
-		kfree(edev->cables[index].attr_g.name);
-err_alloc_cables:
-	if (edev->max_supported)
-		kfree(edev->cables);
-err_sysfs_alloc:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(extcon_dev_register);
-
-/**
- * extcon_dev_unregister() - Unregister the extcon device.
- * @edev:	the extcon device instance to be unregistered.
- *
- * Note that this does not call kfree(edev) because edev was not allocated
- * by this class.
- */
-void extcon_dev_unregister(struct extcon_dev *edev)
-{
-	int index;
-
-	mutex_lock(&extcon_dev_list_lock);
-	list_del(&edev->entry);
-	mutex_unlock(&extcon_dev_list_lock);
-
-	if (IS_ERR_OR_NULL(get_device(&edev->dev))) {
-		dev_err(&edev->dev, "Failed to unregister extcon_dev (%s)\n",
-				dev_name(&edev->dev));
-		return;
-	}
-
-	device_unregister(&edev->dev);
-
-	if (edev->mutually_exclusive && edev->max_supported) {
-		for (index = 0; edev->mutually_exclusive[index];
-				index++)
-			kfree(edev->d_attrs_muex[index].attr.name);
-		kfree(edev->d_attrs_muex);
-		kfree(edev->attrs_muex);
-	}
-
-	for (index = 0; index < edev->max_supported; index++)
-		kfree(edev->cables[index].attr_g.name);
-
-	if (edev->max_supported) {
-		kfree(edev->extcon_dev_type.groups);
-		kfree(edev->cables);
-	}
-
-#if defined(CONFIG_ANDROID)
-	if (switch_class)
-		class_compat_remove_link(switch_class, &edev->dev, NULL);
-#endif
-	put_device(&edev->dev);
-}
-EXPORT_SYMBOL_GPL(extcon_dev_unregister);
-
-static void devm_extcon_dev_unreg(struct device *dev, void *res)
-{
-	extcon_dev_unregister(*(struct extcon_dev **)res);
-}
-
-/**
- * devm_extcon_dev_register() - Resource-managed extcon_dev_register()
- * @dev:	device to allocate extcon device
- * @edev:	the new extcon device to register
- *
- * Managed extcon_dev_register() function. If extcon device is attached with
- * this function, that extcon device is automatically unregistered on driver
- * detach. Internally this function calls extcon_dev_register() function.
- * To get more information, refer that function.
- *
- * If extcon device is registered with this function and the device needs to be
- * unregistered separately, devm_extcon_dev_unregister() should be used.
- *
- * Returns 0 if success or negaive error number if failure.
- */
-int devm_extcon_dev_register(struct device *dev, struct extcon_dev *edev)
-{
-	struct extcon_dev **ptr;
-	int ret;
-
-	ptr = devres_alloc(devm_extcon_dev_unreg, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return -ENOMEM;
-
-	ret = extcon_dev_register(edev);
-	if (ret) {
-		devres_free(ptr);
-		return ret;
-	}
-
-	*ptr = edev;
-	devres_add(dev, ptr);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(devm_extcon_dev_register);
-
-/**
- * devm_extcon_dev_unregister() - Resource-managed extcon_dev_unregister()
- * @dev:	device the extcon belongs to
- * @edev:	the extcon device to unregister
- *
- * Unregister extcon device that is registered with devm_extcon_dev_register()
- * function.
- */
-void devm_extcon_dev_unregister(struct device *dev, struct extcon_dev *edev)
-{
-	WARN_ON(devres_release(dev, devm_extcon_dev_unreg,
-			       devm_extcon_dev_match, edev));
-}
-EXPORT_SYMBOL_GPL(devm_extcon_dev_unregister);
-
-#ifdef CONFIG_OF
-/*
- * extcon_get_edev_by_phandle - Get the extcon device from devicetree
- * @dev - instance to the given device
- * @index - index into list of extcon_dev
- *
- * return the instance of extcon device
- */
-struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
-{
-	struct device_node *node;
-	struct extcon_dev *edev;
-
-	if (!dev->of_node) {
-		dev_err(dev, "device does not have a device node entry\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	node = of_parse_phandle(dev->of_node, "extcon", index);
-	if (!node) {
-		dev_err(dev, "failed to get phandle in %s node\n",
-			dev->of_node->full_name);
-		return ERR_PTR(-ENODEV);
-	}
-
-	mutex_lock(&extcon_dev_list_lock);
-	list_for_each_entry(edev, &extcon_dev_list, entry) {
-		if (edev->dev.parent && edev->dev.parent->of_node == node) {
-			mutex_unlock(&extcon_dev_list_lock);
-			return edev;
-		}
-	}
-	mutex_unlock(&extcon_dev_list_lock);
-
-	return ERR_PTR(-EPROBE_DEFER);
-}
-#else
-struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
-{
-	return ERR_PTR(-ENOSYS);
-}
-#endif /* CONFIG_OF */
-EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle);
-
-static int __init extcon_class_init(void)
-{
-	return create_extcon_class();
-}
-module_init(extcon_class_init);
-
-static void __exit extcon_class_exit(void)
-{
-#if defined(CONFIG_ANDROID)
-	class_compat_unregister(switch_class);
-#endif
-	class_destroy(extcon_class);
-}
-module_exit(extcon_class_exit);
-
-MODULE_AUTHOR("Mike Lockwood <lockwood@xxxxxxxxxxx>");
-MODULE_AUTHOR("Donggeun Kim <dg77.kim@xxxxxxxxxxx>");
-MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("External connector (extcon) class driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
new file mode 100644
index 0000000..8319f25
--- /dev/null
+++ b/drivers/extcon/extcon.c
@@ -0,0 +1,1038 @@
+/*
+ *  drivers/extcon/extcon_class.c
+ *
+ *  External connector (extcon) class driver
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Author: Donggeun Kim <dg77.kim@xxxxxxxxxxx>
+ * Author: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
+ *
+ * based on android/drivers/switch/switch_class.c
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@xxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+/*
+ * extcon_cable_name suggests the standard cable names for commonly used
+ * cable types.
+ *
+ * However, please do not use extcon_cable_name directly for extcon_dev
+ * struct's supported_cable pointer unless your device really supports
+ * every single port-type of the following cable names. Please choose cable
+ * names that are actually used in your extcon device.
+ */
+const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
+	[EXTCON_USB]		= "USB",
+	[EXTCON_USB_HOST]	= "USB-Host",
+	[EXTCON_TA]		= "TA",
+	[EXTCON_FAST_CHARGER]	= "Fast-charger",
+	[EXTCON_SLOW_CHARGER]	= "Slow-charger",
+	[EXTCON_CHARGE_DOWNSTREAM]	= "Charge-downstream",
+	[EXTCON_HDMI]		= "HDMI",
+	[EXTCON_MHL]		= "MHL",
+	[EXTCON_DVI]		= "DVI",
+	[EXTCON_VGA]		= "VGA",
+	[EXTCON_DOCK]		= "Dock",
+	[EXTCON_LINE_IN]	= "Line-in",
+	[EXTCON_LINE_OUT]	= "Line-out",
+	[EXTCON_MIC_IN]		= "Microphone",
+	[EXTCON_HEADPHONE_OUT]	= "Headphone",
+	[EXTCON_SPDIF_IN]	= "SPDIF-in",
+	[EXTCON_SPDIF_OUT]	= "SPDIF-out",
+	[EXTCON_VIDEO_IN]	= "Video-in",
+	[EXTCON_VIDEO_OUT]	= "Video-out",
+	[EXTCON_MECHANICAL]	= "Mechanical",
+};
+
+static struct class *extcon_class;
+#if defined(CONFIG_ANDROID)
+static struct class_compat *switch_class;
+#endif /* CONFIG_ANDROID */
+
+static LIST_HEAD(extcon_dev_list);
+static DEFINE_MUTEX(extcon_dev_list_lock);
+
+/**
+ * check_mutually_exclusive - Check if new_state violates mutually_exclusive
+ *			      condition.
+ * @edev:	the extcon device
+ * @new_state:	new cable attach status for @edev
+ *
+ * Returns 0 if nothing violates. Returns the index + 1 for the first
+ * violated condition.
+ */
+static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
+{
+	int i = 0;
+
+	if (!edev->mutually_exclusive)
+		return 0;
+
+	for (i = 0; edev->mutually_exclusive[i]; i++) {
+		int weight;
+		u32 correspondants = new_state & edev->mutually_exclusive[i];
+
+		/* calculate the total number of bits set */
+		weight = hweight32(correspondants);
+		if (weight > 1)
+			return i + 1;
+	}
+
+	return 0;
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int i, count = 0;
+	struct extcon_dev *edev = dev_get_drvdata(dev);
+
+	if (edev->print_state) {
+		int ret = edev->print_state(edev, buf);
+
+		if (ret >= 0)
+			return ret;
+		/* Use default if failed */
+	}
+
+	if (edev->max_supported == 0)
+		return sprintf(buf, "%u\n", edev->state);
+
+	for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
+		if (!edev->supported_cable[i])
+			break;
+		count += sprintf(buf + count, "%s=%d\n",
+				 edev->supported_cable[i],
+				 !!(edev->state & (1 << i)));
+	}
+
+	return count;
+}
+
+static ssize_t state_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	u32 state;
+	ssize_t ret = 0;
+	struct extcon_dev *edev = dev_get_drvdata(dev);
+
+	ret = sscanf(buf, "0x%x", &state);
+	if (ret == 0)
+		ret = -EINVAL;
+	else
+		ret = extcon_set_state(edev, state);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_RW(state);
+
+static ssize_t name_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct extcon_dev *edev = dev_get_drvdata(dev);
+
+	/* Optional callback given by the user */
+	if (edev->print_name) {
+		int ret = edev->print_name(edev, buf);
+		if (ret >= 0)
+			return ret;
+	}
+
+	return sprintf(buf, "%s\n", dev_name(&edev->dev));
+}
+static DEVICE_ATTR_RO(name);
+
+static ssize_t cable_name_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_name);
+
+	return sprintf(buf, "%s\n",
+		       cable->edev->supported_cable[cable->cable_index]);
+}
+
+static ssize_t cable_state_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_state);
+
+	return sprintf(buf, "%d\n",
+		       extcon_get_cable_state_(cable->edev,
+					       cable->cable_index));
+}
+
+/**
+ * extcon_update_state() - Update the cable attach states of the extcon device
+ *			   only for the masked bits.
+ * @edev:	the extcon device
+ * @mask:	the bit mask to designate updated bits.
+ * @state:	new cable attach status for @edev
+ *
+ * Changing the state sends uevent with environment variable containing
+ * the name of extcon device (envp[0]) and the state output (envp[1]).
+ * Tizen uses this format for extcon device to get events from ports.
+ * Android uses this format as well.
+ *
+ * Note that the notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+{
+	char name_buf[120];
+	char state_buf[120];
+	char *prop_buf;
+	char *envp[3];
+	int env_offset = 0;
+	int length;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
+		u32 old_state = edev->state;
+
+		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
+						   (state & mask))) {
+			spin_unlock_irqrestore(&edev->lock, flags);
+			return -EPERM;
+		}
+
+		edev->state &= ~mask;
+		edev->state |= state & mask;
+
+		raw_notifier_call_chain(&edev->nh, old_state, edev);
+		/* This could be in interrupt handler */
+		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+		if (prop_buf) {
+			length = name_show(&edev->dev, NULL, prop_buf);
+			if (length > 0) {
+				if (prop_buf[length - 1] == '\n')
+					prop_buf[length - 1] = 0;
+				snprintf(name_buf, sizeof(name_buf),
+					"NAME=%s", prop_buf);
+				envp[env_offset++] = name_buf;
+			}
+			length = state_show(&edev->dev, NULL, prop_buf);
+			if (length > 0) {
+				if (prop_buf[length - 1] == '\n')
+					prop_buf[length - 1] = 0;
+				snprintf(state_buf, sizeof(state_buf),
+					"STATE=%s", prop_buf);
+				envp[env_offset++] = state_buf;
+			}
+			envp[env_offset] = NULL;
+			/* Unlock early before uevent */
+			spin_unlock_irqrestore(&edev->lock, flags);
+
+			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
+			free_page((unsigned long)prop_buf);
+		} else {
+			/* Unlock early before uevent */
+			spin_unlock_irqrestore(&edev->lock, flags);
+
+			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
+		}
+	} else {
+		/* No changes */
+		spin_unlock_irqrestore(&edev->lock, flags);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(extcon_update_state);
+
+/**
+ * extcon_set_state() - Set the cable attach states of the extcon device.
+ * @edev:	the extcon device
+ * @state:	new cable attach status for @edev
+ *
+ * Note that notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_set_state(struct extcon_dev *edev, u32 state)
+{
+	return extcon_update_state(edev, 0xffffffff, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state);
+
+/**
+ * extcon_find_cable_index() - Get the cable index based on the cable name.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name to be searched.
+ *
+ * Note that accessing a cable state based on cable_index is faster than
+ * cable_name because using cable_name induces a loop with strncmp().
+ * Thus, when get/set_cable_state is repeatedly used, using cable_index
+ * is recommended.
+ */
+int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
+{
+	int i;
+
+	if (edev->supported_cable) {
+		for (i = 0; edev->supported_cable[i]; i++) {
+			if (!strncmp(edev->supported_cable[i],
+				cable_name, CABLE_NAME_MAX))
+				return i;
+		}
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(extcon_find_cable_index);
+
+/**
+ * extcon_get_cable_state_() - Get the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @index:	cable index that can be retrieved by extcon_find_cable_index().
+ */
+int extcon_get_cable_state_(struct extcon_dev *edev, int index)
+{
+	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+		return -EINVAL;
+
+	return !!(edev->state & (1 << index));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+
+/**
+ * extcon_get_cable_state() - Get the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name.
+ *
+ * Note that this is slower than extcon_get_cable_state_.
+ */
+int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
+{
+	return extcon_get_cable_state_(edev, extcon_find_cable_index
+						(edev, cable_name));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state);
+
+/**
+ * extcon_set_cable_state_() - Set the status of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @index:		cable index that can be retrieved by
+ *			extcon_find_cable_index().
+ * @cable_state:	the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ */
+int extcon_set_cable_state_(struct extcon_dev *edev,
+			int index, bool cable_state)
+{
+	u32 state;
+
+	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+		return -EINVAL;
+
+	state = cable_state ? (1 << index) : 0;
+	return extcon_update_state(edev, 1 << index, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+
+/**
+ * extcon_set_cable_state() - Set the status of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @cable_name:		cable name.
+ * @cable_state:	the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ *
+ * Note that this is slower than extcon_set_cable_state_.
+ */
+int extcon_set_cable_state(struct extcon_dev *edev,
+			const char *cable_name, bool cable_state)
+{
+	return extcon_set_cable_state_(edev, extcon_find_cable_index
+					(edev, cable_name), cable_state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state);
+
+/**
+ * extcon_get_extcon_dev() - Get the extcon device instance from the name
+ * @extcon_name:	The extcon name provided with extcon_dev_register()
+ */
+struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
+{
+	struct extcon_dev *sd;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_for_each_entry(sd, &extcon_dev_list, entry) {
+		if (!strcmp(sd->name, extcon_name))
+			goto out;
+	}
+	sd = NULL;
+out:
+	mutex_unlock(&extcon_dev_list_lock);
+	return sd;
+}
+EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
+
+static int _call_per_cable(struct notifier_block *nb, unsigned long val,
+			   void *ptr)
+{
+	struct extcon_specific_cable_nb *obj = container_of(nb,
+			struct extcon_specific_cable_nb, internal_nb);
+	struct extcon_dev *edev = ptr;
+
+	if ((val & (1 << obj->cable_index)) !=
+	    (edev->state & (1 << obj->cable_index))) {
+		bool cable_state = true;
+
+		obj->previous_value = val;
+
+		if (val & (1 << obj->cable_index))
+			cable_state = false;
+
+		return obj->user_nb->notifier_call(obj->user_nb,
+				cable_state, ptr);
+	}
+
+	return NOTIFY_OK;
+}
+
+/**
+ * extcon_register_interest() - Register a notifier for a state change of a
+ *				specific cable, not an entier set of cables of a
+ *				extcon device.
+ * @obj:		an empty extcon_specific_cable_nb object to be returned.
+ * @extcon_name:	the name of extcon device.
+ *			if NULL, extcon_register_interest will register
+ *			every cable with the target cable_name given.
+ * @cable_name:		the target cable name.
+ * @nb:			the notifier block to get notified.
+ *
+ * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
+ * the struct for you.
+ *
+ * extcon_register_interest is a helper function for those who want to get
+ * notification for a single specific cable's status change. If a user wants
+ * to get notification for any changes of all cables of a extcon device,
+ * he/she should use the general extcon_register_notifier().
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_interest(struct extcon_specific_cable_nb *obj,
+			     const char *extcon_name, const char *cable_name,
+			     struct notifier_block *nb)
+{
+	if (!obj || !cable_name || !nb)
+		return -EINVAL;
+
+	if (extcon_name) {
+		obj->edev = extcon_get_extcon_dev(extcon_name);
+		if (!obj->edev)
+			return -ENODEV;
+
+		obj->cable_index = extcon_find_cable_index(obj->edev,
+							  cable_name);
+		if (obj->cable_index < 0)
+			return obj->cable_index;
+
+		obj->user_nb = nb;
+
+		obj->internal_nb.notifier_call = _call_per_cable;
+
+		return raw_notifier_chain_register(&obj->edev->nh,
+						  &obj->internal_nb);
+	} else {
+		struct class_dev_iter iter;
+		struct extcon_dev *extd;
+		struct device *dev;
+
+		if (!extcon_class)
+			return -ENODEV;
+		class_dev_iter_init(&iter, extcon_class, NULL, NULL);
+		while ((dev = class_dev_iter_next(&iter))) {
+			extd = dev_get_drvdata(dev);
+
+			if (extcon_find_cable_index(extd, cable_name) < 0)
+				continue;
+
+			class_dev_iter_exit(&iter);
+			return extcon_register_interest(obj, extd->name,
+						cable_name, nb);
+		}
+
+		return -ENODEV;
+	}
+}
+EXPORT_SYMBOL_GPL(extcon_register_interest);
+
+/**
+ * extcon_unregister_interest() - Unregister the notifier registered by
+ *				  extcon_register_interest().
+ * @obj:	the extcon_specific_cable_nb object returned by
+ *		extcon_register_interest().
+ */
+int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
+{
+	if (!obj)
+		return -EINVAL;
+
+	return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+}
+EXPORT_SYMBOL_GPL(extcon_unregister_interest);
+
+/**
+ * extcon_register_notifier() - Register a notifiee to get notified by
+ *				any attach status changes from the extcon.
+ * @edev:	the extcon device.
+ * @nb:		a notifier block to be registered.
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_notifier(struct extcon_dev *edev,
+			struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_register_notifier);
+
+/**
+ * extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
+ * @edev:	the extcon device.
+ * @nb:		a registered notifier block to be unregistered.
+ */
+int extcon_unregister_notifier(struct extcon_dev *edev,
+			struct notifier_block *nb)
+{
+	return raw_notifier_chain_unregister(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
+
+static struct attribute *extcon_attrs[] = {
+	&dev_attr_state.attr,
+	&dev_attr_name.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(extcon);
+
+static int create_extcon_class(void)
+{
+	if (!extcon_class) {
+		extcon_class = class_create(THIS_MODULE, "extcon");
+		if (IS_ERR(extcon_class))
+			return PTR_ERR(extcon_class);
+		extcon_class->dev_groups = extcon_groups;
+
+#if defined(CONFIG_ANDROID)
+		switch_class = class_compat_register("switch");
+		if (WARN(!switch_class, "cannot allocate"))
+			return -ENOMEM;
+#endif /* CONFIG_ANDROID */
+	}
+
+	return 0;
+}
+
+static void extcon_dev_release(struct device *dev)
+{
+}
+
+static const char *muex_name = "mutually_exclusive";
+static void dummy_sysfs_dev_release(struct device *dev)
+{
+}
+
+/*
+ * extcon_dev_allocate() - Allocate the memory of extcon device.
+ * @supported_cable:	Array of supported cable names ending with NULL.
+ *			If supported_cable is NULL, cable name related APIs
+ *			are disabled.
+ *
+ * This function allocates the memory for extcon device without allocating
+ * memory in each extcon provider driver and initialize default setting for
+ * extcon device.
+ *
+ * Return the pointer of extcon device if success or ERR_PTR(err) if fail
+ */
+struct extcon_dev *extcon_dev_allocate(const char **supported_cable)
+{
+	struct extcon_dev *edev;
+
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return ERR_PTR(-ENOMEM);
+
+	edev->max_supported = 0;
+	edev->supported_cable = supported_cable;
+
+	return edev;
+}
+
+/*
+ * extcon_dev_free() - Free the memory of extcon device.
+ * @edev:	the extcon device to free
+ */
+void extcon_dev_free(struct extcon_dev *edev)
+{
+	kfree(edev);
+}
+EXPORT_SYMBOL_GPL(extcon_dev_free);
+
+static int devm_extcon_dev_match(struct device *dev, void *res, void *data)
+{
+	struct extcon_dev **r = res;
+
+	if (WARN_ON(!r || !*r))
+		return 0;
+
+	return *r == data;
+}
+
+static void devm_extcon_dev_release(struct device *dev, void *res)
+{
+	extcon_dev_free(*(struct extcon_dev **)res);
+}
+
+/**
+ * devm_extcon_dev_allocate - Allocate managed extcon device
+ * @dev:		device owning the extcon device being created
+ * @supported_cable:	Array of supported cable names ending with NULL.
+ *			If supported_cable is NULL, cable name related APIs
+ *			are disabled.
+ *
+ * This function manages automatically the memory of extcon device using device
+ * resource management and simplify the control of freeing the memory of extcon
+ * device.
+ *
+ * Returns the pointer memory of allocated extcon_dev if success
+ * or ERR_PTR(err) if fail
+ */
+struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
+					    const char **supported_cable)
+{
+	struct extcon_dev **ptr, *edev;
+
+	ptr = devres_alloc(devm_extcon_dev_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	edev = extcon_dev_allocate(supported_cable);
+	if (IS_ERR(edev)) {
+		devres_free(ptr);
+		return edev;
+	}
+
+	edev->dev.parent = dev;
+
+	*ptr = edev;
+	devres_add(dev, ptr);
+
+	return edev;
+}
+EXPORT_SYMBOL_GPL(devm_extcon_dev_allocate);
+
+void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev)
+{
+	WARN_ON(devres_release(dev, devm_extcon_dev_release,
+			       devm_extcon_dev_match, edev));
+}
+EXPORT_SYMBOL_GPL(devm_extcon_dev_free);
+
+/**
+ * extcon_dev_register() - Register a new extcon device
+ * @edev	: the new extcon device (should be allocated before calling)
+ *
+ * Among the members of edev struct, please set the "user initializing data"
+ * in any case and set the "optional callbacks" if required. However, please
+ * do not set the values of "internal data", which are initialized by
+ * this function.
+ */
+int extcon_dev_register(struct extcon_dev *edev)
+{
+	int ret, index = 0;
+
+	if (!extcon_class) {
+		ret = create_extcon_class();
+		if (ret < 0)
+			return ret;
+	}
+
+	if (edev->supported_cable) {
+		/* Get size of array */
+		for (index = 0; edev->supported_cable[index]; index++)
+			;
+		edev->max_supported = index;
+	} else {
+		edev->max_supported = 0;
+	}
+
+	if (index > SUPPORTED_CABLE_MAX) {
+		dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+		return -EINVAL;
+	}
+
+	edev->dev.class = extcon_class;
+	edev->dev.release = extcon_dev_release;
+
+	edev->name = edev->name ? edev->name : dev_name(edev->dev.parent);
+	if (IS_ERR_OR_NULL(edev->name)) {
+		dev_err(&edev->dev,
+			"extcon device name is null\n");
+		return -EINVAL;
+	}
+	dev_set_name(&edev->dev, "%s", edev->name);
+
+	if (edev->max_supported) {
+		char buf[10];
+		char *str;
+		struct extcon_cable *cable;
+
+		edev->cables = kzalloc(sizeof(struct extcon_cable) *
+				       edev->max_supported, GFP_KERNEL);
+		if (!edev->cables) {
+			ret = -ENOMEM;
+			goto err_sysfs_alloc;
+		}
+		for (index = 0; index < edev->max_supported; index++) {
+			cable = &edev->cables[index];
+
+			snprintf(buf, 10, "cable.%d", index);
+			str = kzalloc(sizeof(char) * (strlen(buf) + 1),
+				      GFP_KERNEL);
+			if (!str) {
+				for (index--; index >= 0; index--) {
+					cable = &edev->cables[index];
+					kfree(cable->attr_g.name);
+				}
+				ret = -ENOMEM;
+
+				goto err_alloc_cables;
+			}
+			strcpy(str, buf);
+
+			cable->edev = edev;
+			cable->cable_index = index;
+			cable->attrs[0] = &cable->attr_name.attr;
+			cable->attrs[1] = &cable->attr_state.attr;
+			cable->attrs[2] = NULL;
+			cable->attr_g.name = str;
+			cable->attr_g.attrs = cable->attrs;
+
+			sysfs_attr_init(&cable->attr_name.attr);
+			cable->attr_name.attr.name = "name";
+			cable->attr_name.attr.mode = 0444;
+			cable->attr_name.show = cable_name_show;
+
+			sysfs_attr_init(&cable->attr_state.attr);
+			cable->attr_state.attr.name = "state";
+			cable->attr_state.attr.mode = 0444;
+			cable->attr_state.show = cable_state_show;
+		}
+	}
+
+	if (edev->max_supported && edev->mutually_exclusive) {
+		char buf[80];
+		char *name;
+
+		/* Count the size of mutually_exclusive array */
+		for (index = 0; edev->mutually_exclusive[index]; index++)
+			;
+
+		edev->attrs_muex = kzalloc(sizeof(struct attribute *) *
+					   (index + 1), GFP_KERNEL);
+		if (!edev->attrs_muex) {
+			ret = -ENOMEM;
+			goto err_muex;
+		}
+
+		edev->d_attrs_muex = kzalloc(sizeof(struct device_attribute) *
+					     index, GFP_KERNEL);
+		if (!edev->d_attrs_muex) {
+			ret = -ENOMEM;
+			kfree(edev->attrs_muex);
+			goto err_muex;
+		}
+
+		for (index = 0; edev->mutually_exclusive[index]; index++) {
+			sprintf(buf, "0x%x", edev->mutually_exclusive[index]);
+			name = kzalloc(sizeof(char) * (strlen(buf) + 1),
+				       GFP_KERNEL);
+			if (!name) {
+				for (index--; index >= 0; index--) {
+					kfree(edev->d_attrs_muex[index].attr.
+					      name);
+				}
+				kfree(edev->d_attrs_muex);
+				kfree(edev->attrs_muex);
+				ret = -ENOMEM;
+				goto err_muex;
+			}
+			strcpy(name, buf);
+			sysfs_attr_init(&edev->d_attrs_muex[index].attr);
+			edev->d_attrs_muex[index].attr.name = name;
+			edev->d_attrs_muex[index].attr.mode = 0000;
+			edev->attrs_muex[index] = &edev->d_attrs_muex[index]
+							.attr;
+		}
+		edev->attr_g_muex.name = muex_name;
+		edev->attr_g_muex.attrs = edev->attrs_muex;
+
+	}
+
+	if (edev->max_supported) {
+		edev->extcon_dev_type.groups =
+			kzalloc(sizeof(struct attribute_group *) *
+				(edev->max_supported + 2), GFP_KERNEL);
+		if (!edev->extcon_dev_type.groups) {
+			ret = -ENOMEM;
+			goto err_alloc_groups;
+		}
+
+		edev->extcon_dev_type.name = dev_name(&edev->dev);
+		edev->extcon_dev_type.release = dummy_sysfs_dev_release;
+
+		for (index = 0; index < edev->max_supported; index++)
+			edev->extcon_dev_type.groups[index] =
+				&edev->cables[index].attr_g;
+		if (edev->mutually_exclusive)
+			edev->extcon_dev_type.groups[index] =
+				&edev->attr_g_muex;
+
+		edev->dev.type = &edev->extcon_dev_type;
+	}
+
+	ret = device_register(&edev->dev);
+	if (ret) {
+		put_device(&edev->dev);
+		goto err_dev;
+	}
+#if defined(CONFIG_ANDROID)
+	if (switch_class)
+		ret = class_compat_create_link(switch_class, &edev->dev, NULL);
+#endif /* CONFIG_ANDROID */
+
+	spin_lock_init(&edev->lock);
+
+	RAW_INIT_NOTIFIER_HEAD(&edev->nh);
+
+	dev_set_drvdata(&edev->dev, edev);
+	edev->state = 0;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_add(&edev->entry, &extcon_dev_list);
+	mutex_unlock(&extcon_dev_list_lock);
+
+	return 0;
+
+err_dev:
+	if (edev->max_supported)
+		kfree(edev->extcon_dev_type.groups);
+err_alloc_groups:
+	if (edev->max_supported && edev->mutually_exclusive) {
+		for (index = 0; edev->mutually_exclusive[index]; index++)
+			kfree(edev->d_attrs_muex[index].attr.name);
+		kfree(edev->d_attrs_muex);
+		kfree(edev->attrs_muex);
+	}
+err_muex:
+	for (index = 0; index < edev->max_supported; index++)
+		kfree(edev->cables[index].attr_g.name);
+err_alloc_cables:
+	if (edev->max_supported)
+		kfree(edev->cables);
+err_sysfs_alloc:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_dev_register);
+
+/**
+ * extcon_dev_unregister() - Unregister the extcon device.
+ * @edev:	the extcon device instance to be unregistered.
+ *
+ * Note that this does not call kfree(edev) because edev was not allocated
+ * by this class.
+ */
+void extcon_dev_unregister(struct extcon_dev *edev)
+{
+	int index;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_del(&edev->entry);
+	mutex_unlock(&extcon_dev_list_lock);
+
+	if (IS_ERR_OR_NULL(get_device(&edev->dev))) {
+		dev_err(&edev->dev, "Failed to unregister extcon_dev (%s)\n",
+				dev_name(&edev->dev));
+		return;
+	}
+
+	device_unregister(&edev->dev);
+
+	if (edev->mutually_exclusive && edev->max_supported) {
+		for (index = 0; edev->mutually_exclusive[index];
+				index++)
+			kfree(edev->d_attrs_muex[index].attr.name);
+		kfree(edev->d_attrs_muex);
+		kfree(edev->attrs_muex);
+	}
+
+	for (index = 0; index < edev->max_supported; index++)
+		kfree(edev->cables[index].attr_g.name);
+
+	if (edev->max_supported) {
+		kfree(edev->extcon_dev_type.groups);
+		kfree(edev->cables);
+	}
+
+#if defined(CONFIG_ANDROID)
+	if (switch_class)
+		class_compat_remove_link(switch_class, &edev->dev, NULL);
+#endif
+	put_device(&edev->dev);
+}
+EXPORT_SYMBOL_GPL(extcon_dev_unregister);
+
+static void devm_extcon_dev_unreg(struct device *dev, void *res)
+{
+	extcon_dev_unregister(*(struct extcon_dev **)res);
+}
+
+/**
+ * devm_extcon_dev_register() - Resource-managed extcon_dev_register()
+ * @dev:	device to allocate extcon device
+ * @edev:	the new extcon device to register
+ *
+ * Managed extcon_dev_register() function. If extcon device is attached with
+ * this function, that extcon device is automatically unregistered on driver
+ * detach. Internally this function calls extcon_dev_register() function.
+ * To get more information, refer that function.
+ *
+ * If extcon device is registered with this function and the device needs to be
+ * unregistered separately, devm_extcon_dev_unregister() should be used.
+ *
+ * Returns 0 if success or negaive error number if failure.
+ */
+int devm_extcon_dev_register(struct device *dev, struct extcon_dev *edev)
+{
+	struct extcon_dev **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_extcon_dev_unreg, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = extcon_dev_register(edev);
+	if (ret) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = edev;
+	devres_add(dev, ptr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_extcon_dev_register);
+
+/**
+ * devm_extcon_dev_unregister() - Resource-managed extcon_dev_unregister()
+ * @dev:	device the extcon belongs to
+ * @edev:	the extcon device to unregister
+ *
+ * Unregister extcon device that is registered with devm_extcon_dev_register()
+ * function.
+ */
+void devm_extcon_dev_unregister(struct device *dev, struct extcon_dev *edev)
+{
+	WARN_ON(devres_release(dev, devm_extcon_dev_unreg,
+			       devm_extcon_dev_match, edev));
+}
+EXPORT_SYMBOL_GPL(devm_extcon_dev_unregister);
+
+#ifdef CONFIG_OF
+/*
+ * extcon_get_edev_by_phandle - Get the extcon device from devicetree
+ * @dev - instance to the given device
+ * @index - index into list of extcon_dev
+ *
+ * return the instance of extcon device
+ */
+struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
+{
+	struct device_node *node;
+	struct extcon_dev *edev;
+
+	if (!dev->of_node) {
+		dev_err(dev, "device does not have a device node entry\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	node = of_parse_phandle(dev->of_node, "extcon", index);
+	if (!node) {
+		dev_err(dev, "failed to get phandle in %s node\n",
+			dev->of_node->full_name);
+		return ERR_PTR(-ENODEV);
+	}
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_for_each_entry(edev, &extcon_dev_list, entry) {
+		if (edev->dev.parent && edev->dev.parent->of_node == node) {
+			mutex_unlock(&extcon_dev_list_lock);
+			return edev;
+		}
+	}
+	mutex_unlock(&extcon_dev_list_lock);
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+#else
+struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
+{
+	return ERR_PTR(-ENOSYS);
+}
+#endif /* CONFIG_OF */
+EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle);
+
+static int __init extcon_class_init(void)
+{
+	return create_extcon_class();
+}
+module_init(extcon_class_init);
+
+static void __exit extcon_class_exit(void)
+{
+#if defined(CONFIG_ANDROID)
+	class_compat_unregister(switch_class);
+#endif
+	class_destroy(extcon_class);
+}
+module_exit(extcon_class_exit);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@xxxxxxxxxxx>");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@xxxxxxxxxxx>");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("External connector (extcon) class driver");
+MODULE_LICENSE("GPL");
-- 
1.8.5.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/