Re: [PATCH v3 7/7] x86, kaslr, 64bit: Set new or extra ident_mapping

[Yinghai Lu]

On Mon, Mar 9, 2015 at 6:09 PM, Kees Cook <keescook@xxxxxxxxxxxx> wrote:
> On Sat, Mar 7, 2015 at 2:07 PM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
>> First, aslr will support to put random VO above 4G, so we must set ident
>> mapping for the range even we come from startup_32 path.
>>
>> Second, when boot from 64bit bootloader, bootloader set ident mapping,
>> and boot via ZO (arch/x86/boot/compressed/vmlinux) startup_64.
>> Those pages for pagetable need to be avoided when we select new random
>> VO (vmlinux) base. Otherwise decompressor would overwrite them during
>> decompressing.
>>
>> One solution: go through pagetable and find out every page is used by
>> pagetable for every mem_aovid checking but we will need extra code.
>>
>> Other solution: create new ident mapping instead, and pages for pagetable
>> will sit in _pagetable section of ZO, and they are in mem_avoid array already.
>> In this way, we can reuse the code for setting ident mapping.
>>
>> The _pgtable will be shared 32bit and 64bit path to reduce init_size,
>> as now ZO _rodata to _end will contribute init_size.
>>
>> Need to increase pgt buffer size.
>> When boot via startup_64, as we need to cover old VO, params, cmdline
>> and new VO, in extreme case we could have them all cross 512G boundary,
>> will need (2+2)*4 pages with 2M mapping. And need 2 for first 2M for vga ram.
>> Plus one for level4. Total will be 19 pages.
>> When boot via startup_32, aslr would move new VO above 4G, we need set extra
>> ident mapping for new VO, pgt buffer come from _pgtable offset 6 pages.
>> should only need (2+2) pages at most when it cross 512G boundary.
>> So 19 pages could make both pathes happy.
>>
>>
>> -v3: add mapping for first 2M with video ram when X86_VERBOSE_BOOTUP is set.
>>      Don't need to set mapping for setup_data, as it is already late
>>      in boot/ZO stage, will not access it until VO stage, and VO stage
>>      will use early_memmap or kernel address to access them.
>>
>> Cc: Kees Cook <keescook@xxxxxxxxxxxx>
>> Cc: Jiri Kosina <jkosina@xxxxxxx>
>> Cc: Borislav Petkov <bp@xxxxxxx>
>> Cc: Matt Fleming <matt.fleming@xxxxxxxxx>
>> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
>> ---
>>  arch/x86/boot/compressed/aslr.c     | 21 ++++++++
>>  arch/x86/boot/compressed/head_64.S  |  4 +-
>>  arch/x86/boot/compressed/misc_pgt.c | 98 +++++++++++++++++++++++++++++++++++++
>>  arch/x86/include/asm/boot.h         | 19 +++++++
>>  4 files changed, 140 insertions(+), 2 deletions(-)
>>  create mode 100644 arch/x86/boot/compressed/misc_pgt.c
>>
>> diff --git a/arch/x86/boot/compressed/aslr.c b/arch/x86/boot/compressed/aslr.c
>> index a279514..34eb652 100644
>> --- a/arch/x86/boot/compressed/aslr.c
>> +++ b/arch/x86/boot/compressed/aslr.c
>> @@ -1,3 +1,8 @@
>> +#ifdef CONFIG_X86_64
>> +#define __pa(x)  ((unsigned long)(x))
>> +#define __va(x)  ((void *)((unsigned long)(x)))
>> +#endif
>> +
>>  #include "misc.h"
>>
>>  #include <asm/msr.h>
>> @@ -21,6 +26,8 @@ struct kaslr_setup_data {
>>         __u8 data[1];
>>  } kaslr_setup_data;
>>
>> +#include "misc_pgt.c"
>
> Shouldn't this just be a normal built .o file that is linked together
> in the Makefile, specifically tracking CONFIG_RANDOMIZE_BASE as aslr.o
> already is?

Yes, we could go that way.

Thanks

Yinghai
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/