Re: [PATCHv3 0/5] arm-cci400: PMU monitoring support on ARM64

[Punit Agrawal]

"Suzuki K. Poulose" <suzuki.poulose@xxxxxxx> writes:

> From: "Suzuki K. Poulose" <suzuki.poulose@xxxxxxx>
>
> This series enables the PMU monitoring support for CCI400 on ARM64.
> The existing CCI400 driver code is a mix of PMU driver and the MCPM
> driver code. The MCPM driver is only used on ARM(32) and contains
> arm32 assembly and hence can't be built on ARM64. This patch splits
> the code to
>
>  - ARM_CCI400_PORT_CTRL driver - depends on ARM && V7
>  - ARM_CCI400_PMU driver
>
> Accessing the Peripheral ID2 register(PID2) on CCI-400, to detect
> the revision of the chipset, is a secure operation. Hence, it prevents
> us from running this on non-secure platforms. The issue is overcome by
> explicitly mentioning the revision number of the CCI PMU in the device tree
> binding. The device-tree binding has been updated with the new bindings.
>
> i.e,	arm-cci-400-pmu,r0 => revision 0
> 	arm-cci-400-pmu,r1 => revision 1
> 	arm-cci-400-pmu => (old) DEPRECATED
>
> The old binding has been DEPRECATED and must be used only on ARM32
> system with secure access. We don't have a reliable dynamic way to detect
> if the system is running secure. This series tries to use the best safe
> method by relying on the availability of MCPM(as it was prior to the series).
> It is upto the MCPM platform driver to decide, if the system is secure before
> it goes ahead and registers its drivers and pokes the CCI. This series doesn't
> address/solve the problem of MCPM. I will be happy to use a better approach,
> if there is any.
>
> Tested on (non-secure)TC2 and A53x2.
>

For the series,

Acked-by: Punit Agrawal <punit.agrawal@xxxxxxx>

Cheers,
Punit

[...]

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/