Re: [PATCH v5 12/12] ARM: dts: sun6i: hummingbird: Enable the onboard WiFi module

[Maxime Ripard]

On Wed, Mar 11, 2015 at 05:08:08PM +0800, Chen-Yu Tsai wrote:
> On Wed, Mar 11, 2015 at 4:52 PM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > On Wed, Mar 11, 2015 at 11:11:49AM +0800, Chen-Yu Tsai wrote:
> >> On Wed, Mar 11, 2015 at 5:32 AM, Maxime Ripard
> >> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> >> > On Tue, Mar 10, 2015 at 07:59:24PM +0800, Chen-Yu Tsai wrote:
> >> >> The Hummingbird A31 has an AMPAK AP6210 WiFi+Bluetooth module. The
> >> >> WiFi part is a BCM43362 IC connected to MMC1 in the A31 SoC via SDIO.
> >> >> The IC also takes a power enable signal via GPIO. This is supported
> >> >> with the new power sequencing bindings.
> >> >>
> >> >> The WiFi module supports out-of-band interrupt signaling via GPIO,
> >> >> but this is buggy and not enabled yet.
> >> >>
> >> >> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> >> >
> >> > There's two almost identical patches 12/12. Which one am I suppose to
> >> > apply?
> >>
> >> This one is the right one. I forgot to clear the patches after changing
> >> the description. The "buggy" part in the description is probably not
> >> needed. Hans explained that the SD resets have nothing to do with
> >> interrupt handling.
> >
> > Just to be clear, you want the last sentence to be:
> >
> > The WiFi module supports out-of-band interrupt signaling via GPIO, but
> > this is not enabled yet.
> >
> > Right?
> 
> That's right. Thanks.

Ack. I just applied it without the buggy mention.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature