[PATCH] ath10k: match wait_for_completion_timeout return type

From: Nicholas Mc Guire
Date: Wed Mar 11 2015 - 13:19:38 EST


Return type of wait_for_completion_timeout is unsigned long not int.
An appropriately named unsigned long is added and the assignments fixed up.

Signed-off-by: Nicholas Mc Guire <hofrat@xxxxxxxxx>
---

While at it the missing spaces 3*HZ -> 3 * HZ were added as well (should
this be in a separate patch ?)

Patch was only compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m,
CONFIG_ATH10K=m

Patch is against 4.0-rc3 (localversion-next is -next-20150311)

drivers/net/wireless/ath/ath10k/mac.c | 35 +++++++++++++++++++--------------
1 file changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e8cc19f..7db8b81 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -98,6 +98,7 @@ static int ath10k_install_key(struct ath10k_vif *arvif,
const u8 *macaddr, bool def_idx)
{
struct ath10k *ar = arvif->ar;
+ unsigned long time_left;
int ret;

lockdep_assert_held(&ar->conf_mutex);
@@ -108,8 +109,8 @@ static int ath10k_install_key(struct ath10k_vif *arvif,
if (ret)
return ret;

- ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ);
- if (ret == 0)
+ time_left = wait_for_completion_timeout(&ar->install_key_done, 3 * HZ);
+ if (!time_left)
return -ETIMEDOUT;

return 0;
@@ -561,16 +562,16 @@ static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)

static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
{
- int ret;
+ unsigned long time_left;

lockdep_assert_held(&ar->conf_mutex);

if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
return -ESHUTDOWN;

- ret = wait_for_completion_timeout(&ar->vdev_setup_done,
+ time_left = wait_for_completion_timeout(&ar->vdev_setup_done,
ATH10K_VDEV_SETUP_TIMEOUT_HZ);
- if (ret == 0)
+ if (!time_left)
return -ETIMEDOUT;

return 0;
@@ -2432,6 +2433,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
const u8 *peer_addr;
int vdev_id;
int ret;
+ unsigned long time_left;

/* FW requirement: We must create a peer before FW will send out
* an offchannel frame. Otherwise the frame will be stuck and
@@ -2477,9 +2479,9 @@ void ath10k_offchan_tx_work(struct work_struct *work)

ath10k_tx_htt(ar, skb);

- ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
- 3 * HZ);
- if (ret == 0)
+ time_left = wait_for_completion_timeout(
+ &ar->offchan_tx_completed, 3 * HZ);
+ if (!time_left)
ath10k_warn(ar, "timed out waiting for offchannel skb %p\n",
skb);

@@ -2573,6 +2575,7 @@ static int ath10k_scan_stop(struct ath10k *ar)
.u.scan_id = ATH10K_SCAN_ID,
};
int ret;
+ unsigned long time_left;

lockdep_assert_held(&ar->conf_mutex);

@@ -2582,11 +2585,11 @@ static int ath10k_scan_stop(struct ath10k *ar)
goto out;
}

- ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
- if (ret == 0) {
+ time_left = wait_for_completion_timeout(&ar->scan.completed, 3 * HZ);
+ if (!time_left) {
ath10k_warn(ar, "failed to receive scan abortion completion: timed out\n");
ret = -ETIMEDOUT;
- } else if (ret > 0) {
+ } else if (time_left > 0) {
ret = 0;
}

@@ -2655,6 +2658,7 @@ static int ath10k_start_scan(struct ath10k *ar,
const struct wmi_start_scan_arg *arg)
{
int ret;
+ unsigned long time_left;

lockdep_assert_held(&ar->conf_mutex);

@@ -2662,8 +2666,8 @@ static int ath10k_start_scan(struct ath10k *ar,
if (ret)
return ret;

- ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
- if (ret == 0) {
+ time_left = wait_for_completion_timeout(&ar->scan.started, 1 * HZ);
+ if (!time_left) {
ret = ath10k_scan_stop(ar);
if (ret)
ath10k_warn(ar, "failed to stop scan: %d\n", ret);
@@ -4355,6 +4359,7 @@ static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
struct wmi_start_scan_arg arg;
int ret = 0;
+ unsigned long time_left;

mutex_lock(&ar->conf_mutex);

@@ -4404,8 +4409,8 @@ static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
goto exit;
}

- ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ);
- if (ret == 0) {
+ time_left = wait_for_completion_timeout(&ar->scan.on_channel, 3 * HZ);
+ if (!time_left) {
ath10k_warn(ar, "failed to switch to channel for roc scan\n");

ret = ath10k_scan_stop(ar);
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/