[tip:timers/core] clocksource: Mostly kill clocksource_register()

[tip-bot for John Stultz]

Commit-ID:  f8935983f110505daa38e8d36ee406807f83a069
Gitweb:     http://git.kernel.org/tip/f8935983f110505daa38e8d36ee406807f83a069
Author:     John Stultz <john.stultz@xxxxxxxxxx>
AuthorDate: Wed, 11 Mar 2015 21:16:37 -0700
Committer:  Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Fri, 13 Mar 2015 08:07:06 +0100

clocksource: Mostly kill clocksource_register()

A long running project has been to clean up remaining uses
of clocksource_register(), replacing it with the simpler
clocksource_register_khz/hz() functions.

However, there are a few cases where we need to self-define
our mult/shift values, so switch the function to a more
obviously internal __clocksource_register() name, and
consolidate much of the internal logic so we don't have
duplication.

Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
Cc: Dave Jones <davej@xxxxxxxxxxxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Prarit Bhargava <prarit@xxxxxxxxxx>
Cc: Richard Cochran <richardcochran@xxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Link: http://lkml.kernel.org/r/1426133800-29329-10-git-send-email-john.stultz@xxxxxxxxxx
[ Minor cleanups. ]
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
 arch/s390/kernel/time.c     |  2 +-
 arch/sparc/kernel/time_32.c |  2 +-
 include/linux/clocksource.h | 10 +++++-
 kernel/time/clocksource.c   | 81 +++++++++++++++++++--------------------------
 kernel/time/jiffies.c       |  4 +--
 5 files changed, 47 insertions(+), 52 deletions(-)

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 20660dd..6c273cd 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -283,7 +283,7 @@ void __init time_init(void)
 	if (register_external_irq(EXT_IRQ_TIMING_ALERT, timing_alert_interrupt))
 		panic("Couldn't request external interrupt 0x1406");
 
-	if (clocksource_register(&clocksource_tod) != 0)
+	if (__clocksource_register(&clocksource_tod) != 0)
 		panic("Could not register TOD clock source");
 
 	/* Enable TOD clock interrupts on the boot cpu. */
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 2f80d23..a31c0c8 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -191,7 +191,7 @@ static __init int setup_timer_cs(void)
 	timer_cs.mult = clocksource_hz2mult(sparc_config.clock_rate,
 	                                    timer_cs.shift);
 
-	return clocksource_register(&timer_cs);
+	return __clocksource_register(&timer_cs);
 }
 
 #ifdef CONFIG_SMP
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 16d048c..bd98eaa 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -179,7 +179,6 @@ static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
 }
 
 
-extern int clocksource_register(struct clocksource*);
 extern int clocksource_unregister(struct clocksource*);
 extern void clocksource_touch_watchdog(void);
 extern struct clocksource* clocksource_get_next(void);
@@ -203,6 +202,15 @@ __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
 extern void
 __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
 
+/*
+ * Don't call this unless you are a default clocksource
+ * (AKA: jiffies) and absolutely have to.
+ */
+static inline int __clocksource_register(struct clocksource *cs)
+{
+	return __clocksource_register_scale(cs, 1, 0);
+}
+
 static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
 {
 	return __clocksource_register_scale(cs, 1, hz);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index c4cc04b..5cdf17e 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -656,38 +656,52 @@ static void clocksource_enqueue(struct clocksource *cs)
 void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
 {
 	u64 sec;
+
 	/*
-	 * Calc the maximum number of seconds which we can run before
-	 * wrapping around. For clocksources which have a mask > 32bit
-	 * we need to limit the max sleep time to have a good
-	 * conversion precision. 10 minutes is still a reasonable
-	 * amount. That results in a shift value of 24 for a
-	 * clocksource with mask >= 40bit and f >= 4GHz. That maps to
-	 * ~ 0.06ppm granularity for NTP.
+	 * Default clocksources are *special* and self-define their mult/shift.
+	 * But, you're not special, so you should specify a freq value.
 	 */
-	sec = cs->mask;
-	do_div(sec, freq);
-	do_div(sec, scale);
-	if (!sec)
-		sec = 1;
-	else if (sec > 600 && cs->mask > UINT_MAX)
-		sec = 600;
-
-	clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
-			       NSEC_PER_SEC / scale, sec * scale);
-
+	if (freq) {
+		/*
+		 * Calc the maximum number of seconds which we can run before
+		 * wrapping around. For clocksources which have a mask > 32-bit
+		 * we need to limit the max sleep time to have a good
+		 * conversion precision. 10 minutes is still a reasonable
+		 * amount. That results in a shift value of 24 for a
+		 * clocksource with mask >= 40-bit and f >= 4GHz. That maps to
+		 * ~ 0.06ppm granularity for NTP.
+		 */
+		sec = cs->mask;
+		do_div(sec, freq);
+		do_div(sec, scale);
+		if (!sec)
+			sec = 1;
+		else if (sec > 600 && cs->mask > UINT_MAX)
+			sec = 600;
+
+		clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
+				       NSEC_PER_SEC / scale, sec * scale);
+	}
 	/*
 	 * Ensure clocksources that have large 'mult' values don't overflow
 	 * when adjusted.
 	 */
 	cs->maxadj = clocksource_max_adjustment(cs);
-	while ((cs->mult + cs->maxadj < cs->mult)
-		|| (cs->mult - cs->maxadj > cs->mult)) {
+	while (freq && ((cs->mult + cs->maxadj < cs->mult)
+		|| (cs->mult - cs->maxadj > cs->mult))) {
 		cs->mult >>= 1;
 		cs->shift--;
 		cs->maxadj = clocksource_max_adjustment(cs);
 	}
 
+	/*
+	 * Only warn for *special* clocksources that self-define
+	 * their mult/shift values and don't specify a freq.
+	 */
+	WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
+		"timekeeping: Clocksource %s might overflow on 11%% adjustment\n",
+		cs->name);
+
 	clocksource_update_max_deferment(cs);
 }
 EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
@@ -719,33 +733,6 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
 }
 EXPORT_SYMBOL_GPL(__clocksource_register_scale);
 
-
-/**
- * clocksource_register - Used to install new clocksources
- * @cs:		clocksource to be registered
- *
- * Returns -EBUSY if registration fails, zero otherwise.
- */
-int clocksource_register(struct clocksource *cs)
-{
-	/* calculate max adjustment for given mult/shift */
-	cs->maxadj = clocksource_max_adjustment(cs);
-	WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
-		"Clocksource %s might overflow on 11%% adjustment\n",
-		cs->name);
-
-	/* Update max idle time permitted for this clocksource */
-	clocksource_update_max_deferment(cs);
-
-	mutex_lock(&clocksource_mutex);
-	clocksource_enqueue(cs);
-	clocksource_enqueue_watchdog(cs);
-	clocksource_select();
-	mutex_unlock(&clocksource_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(clocksource_register);
-
 static void __clocksource_change_rating(struct clocksource *cs, int rating)
 {
 	list_del(&cs->list);
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 7e41390..c4bb518 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(jiffies);
 
 static int __init init_jiffies_clocksource(void)
 {
-	return clocksource_register(&clocksource_jiffies);
+	return __clocksource_register(&clocksource_jiffies);
 }
 
 core_initcall(init_jiffies_clocksource);
@@ -131,6 +131,6 @@ int register_refined_jiffies(long cycles_per_second)
 
 	refined_jiffies.mult = ((u32)nsec_per_tick) << JIFFIES_SHIFT;
 
-	clocksource_register(&refined_jiffies);
+	__clocksource_register(&refined_jiffies);
 	return 0;
 }
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/