Re: [PATCH v2] HID: wacom: ask for a in-prox report when it was missed
From: Jason Gerecke
Date: Mon Mar 16 2015 - 18:36:44 EST
On 3/16/2015 2:04 PM, Benjamin Tissoires wrote:
On Mar 16 2015 or thereabouts, Jason Gerecke wrote:
On 3/16/2015 12:27 PM, Benjamin Tissoires wrote:
On Mar 16 2015 or thereabouts, Jason Gerecke wrote:
On 3/16/2015 7:50 AM, Jiri Kosina wrote:
On Thu, 5 Mar 2015, Benjamin Tissoires wrote:
If noone listens to the input device when a tool comes in proximity,
the tablet does not send the in-prox event when a client becomes available.
That means that no events will be sent until the tool is taken out of
proximity.
In this situation, ask for the report WACOM_REPORT_INTUOSREAD which will
read the corresponding feature and generate an in-prox event.
To make some generation of hardware working, we need to unset the
quirk NO_GET set by hid-core because the interfaces are seen as "boot
mouse".
We don't schedule this read in a worker while we are in an IO interrupt.
We know that usbhid will do it asynchronously. If this is triggered by
uhid, then this is obviously a client side bug :)
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Ping, Jason, I'd like to get your Ack on this before pushing this through
if possible.
Thanks.
This update seems to have solved the issue I was having earlier. I do
still see some weird behavior with the Intuos3 though. For whatever
reason, if a tool is in prox and no client is connected, the device
will repeatedly connect and disconnect from the bus. For example,
while sitting at a VT after connecting the device:
[ 209.890431] usb 2-1.5.4: new full-speed USB device number 10 using ehci-pci
[ 209.992189] input: Wacom Intuos3 6x8 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.4/2-1.5.4:1.0/0003:056A:00B1.0009/input/input26
[ 209.992475] input: Wacom Intuos3 6x8 Pad as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.4/2-1.5.4:1.0/0003:056A:00B1.0009/input/input27
[ 209.992846] wacom 0003:056A:00B1.0009: hidraw4: USB HID v1.00 Mouse
[Tablet PTZ-630] on usb-0000:00:1d.0-1.5.4/input0
[ 213.022545] usb 2-1.5.4: USB disconnect, device number 10
[ 213.344055] usb 2-1.5.4: new full-speed USB device number 11 using ehci-pci
[ 213.445779] input: Wacom Intuos3 6x8 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.4/2-1.5.4:1.0/0003:056A:00B1.000A/input/input28
[ 213.446185] input: Wacom Intuos3 6x8 Pad as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.4/2-1.5.4:1.0/0003:056A:00B1.000A/input/input29
[ 213.446703] wacom 0003:056A:00B1.000A: hidraw4: USB HID v1.00 Mouse
[Tablet PTZ-630] on usb-0000:00:1d.0-1.5.4/input0
[ 214.815925] usb 2-1.5.4: USB disconnect, device number 11
[ 215.246142] usb 2-1.5.4: new full-speed USB device number 12 using ehci-pci
[ ... and so on ...]
It makes using the device from a VT difficult (e.g. for debugging),
but in the typical case where X is started shortly after boot and
hotplugs devices as soon as they're available it shouldn't pose a
problem. If Benjamin has any ideas I'd like to hear them, but in the
meantime I'm comfortable seeing this go upstream:
HID_QUIRK_ALWAYS_POLL :)
Some usb devices do not like to not be polled and keep
disconnecting/reconnecting. Looks like the Intuos 3 is one of them.
The only cons are that the device won't save power when no one is reading
the inputs. Not sure if that is a requirement for Wacom tablets though.
Note that HID_QUIRK_ALWAYS_POLL should make this patch useless in these
cases, the kernel will keep track of the current device because it will
receive the events.
Acked-by: Jason Gerecke <killertofu@xxxxxxxxx>
Thanks!
Cheers,
Benjamin
That does indeed seem to solve the Intuos3 weirdness :)
Saving power is a big deal for ISDv4/5 sensors where it has a direct impact
on runtime. If setting HID_QURIK_ALWAYS_POLL e.g. disables USB selective
suspend then that'd be an issue. However, if it simply causes the kernel to
respond to events even if nobody is listening then it'd probably be similar
to the situation when we were under drivers/input.
I'm inclined to say we should target that quirk at only those devices that
need it since I know tablet PC manufacturers go to quite some lengths to
minimize every mA of unnecessary current draw from the batteries.
Just a thought, but it looks like the problematic generation have the
QUIRK_NO_GET set by hid-core (boot interface). If you are on it, could I
ask you to test to set HID_QUIRK_ALWAYS_POLL and unset HID_QUIRK_NO_GET
only if HID_QUIRK_NO_GET was set?
IIRC, there was no problems on the Intuos 4+ with the USB suspend, so
maybe that trick would be enough.
Cheers,
Benjamin
I'm not sure that'll be enough. Most of our devices use a boot mouse
interface, even some that work fine using the default quirks (e.g.
Cintiq 24HDT). On the tablet PC side of the world, it looks like its a
crapshoot whether the sensor will have a boot mouse collection or
something else (though I haven't yet checked to see how they react to
having a pen in prox without a client).
--
Jason
---
Now instead of four in the eights place /
youâve got three, âCause you added one /
(That is to say, eight) to the two, /
But you canât take seven from three, /
So you look at the sixty-fours....
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/