Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
From: Dr. H. Nikolaus Schaller
Date: Tue Mar 17 2015 - 05:08:04 EST
Am 17.03.2015 um 09:47 schrieb Pavel Machek <pavel@xxxxxx>:
> Hi!
>
>>>> diff --git a/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
>>>> new file mode 100644
>>>> index 0000000..bb3580c
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
>>>> @@ -0,0 +1,43 @@
>>>> +twl4030_madc_battery
>>>> +
>>>> +Required properties:
>>>> + - compatible : "ti,twl4030-madc-battery"
>>>> + - capacity-uah : battery capacity in uAh
>>>
>>> Could we make it capacity-uAh ?
>> This name was suggested by Mark Rutland [1] and naming convention
>> should be all lowercase. There exists already bindings
>> without uppercase (e.g. ti,bb-uamp) so I would keep it consistent.
>
> Messing up SI units due to "convention" is _stupid_. Don't do it.
>
>>> to introduce coefficients for temperature and discharge rate?
>> What do you mean? Nothing like that is used in current driver why do
>> we need to add it?
>
> Well, conversion between Li-ion's voltage and state of charge at 0
> current is well known:
>
> def percent(m, v):
> u = 0.0387-(1.4523*(3.7835-v))
> if u < 0:
> return 0
> return (0.1966+math.sqrt(u))*100
I forgot to ask: does the kernel have a sqrt() function?
>
> And there's not much to calibrate there, and it should become library
> helper function; there's no need to write it to every single dts.
>
> The charge/discharge difference is due to internal battery resistance,
> and Ohm's law. (Then, you should not need different values for
> charging/discharging case.)
>
> With your aproach, you'll get lower percentage when phone is under
> load vs. idle. Taking internal resistance into account would give you
> more precise readings. (Attached, old patch for zaurus shows the
> needed computation).
>
> And if you wanted even more precise readings... internal resistance
> depends on temperature.
>
> I guess this should go into library somewhere, because many machines
> need similar code.
>
> Pavel
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
> <zbattery.10.diff>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/