Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings

[Pavel Machek]

Hi!

> >>>>> to introduce coefficients for temperature and discharge rate?
> >>>> What do you mean? Nothing like that is used in current driver why do
> >>>> we need to add it?
> >>> 
> >>> Well, conversion between Li-ion's voltage and state of charge at 0
> >>> current is well known:
> >> 
> >> We canât measure at 0 current since the OMAP is driven from battery
> >> and charger and may also draw some mAâ
> > 
> > Yes, but you know how many mA you are taking just now. So if you knew
> > the internal resistance, you could compute the voltage at 0
> > current. (And it should also work during charging, as long as you know
> > how much current is going in.)
> 
> As far as I understand the twl4030 charger and MADC it is not possible to
> separate these values. It is only reporting the inflow from charger to
> battery + system. So you donât know how many mA are supplying the system
> and how many mA are left over for charging.
> 
> You can only assume how much the system is drawing while running (something
> between 50 and 600 mA but this depends on system activities, power state
> of peripherald and e.g. backlight being switched on).
> 
> I think your basic assumption that we know any time how many mA the system
> is taking is not given.

So.. you won't be able to get exact value while charging, but you
get one while discharging, which is what really matters...?

> > Yes, and that coefficient should be internal battery resistance ;-).
> 
> But where do you know this value from to write it into a DT file?
> Usually you canât measure it easily and for some batteries you donât have
> a data sheet.
> 
> Contrary, the calibration curves can easily be measured on the device
> (assuming that the charge level decreases/increases linearly over time
> between Full and Empty).

If you can copy it from the data sheet, that's the easiest option. If
not, you should be able to easily compute it from the charge/discharge
curves or from measured voltage at different loads.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/