[PATCHv4 0/5] arm-cci400: PMU monitoring support on ARM64

[Suzuki K. Poulose]

From: "Suzuki K. Poulose" <suzuki.poulose@xxxxxxx>

This series enables the PMU monitoring support for CCI400 on ARM64.
The existing CCI400 driver code is a mix of PMU driver and the MCPM
driver code. The MCPM driver is only used on ARM(32) and contains
arm32 assembly and hence can't be built on ARM64. This patch splits
the code to

 - ARM_CCI400_PORT_CTRL driver - depends on ARM && V7
 - ARM_CCI400_PMU driver

Accessing the Peripheral ID2 register(PID2) on CCI-400, to detect
the revision of the chipset, is a secure operation. Hence, it prevents
us from running this on non-secure platforms. The issue is overcome by
explicitly mentioning the revision number of the CCI PMU in the device tree
binding. The device-tree binding has been updated with the new bindings.

i.e,	arm-cci-400-pmu,r0 => revision 0
	arm-cci-400-pmu,r1 => revision 1
	arm-cci-400-pmu => (old) DEPRECATED

The old binding has been DEPRECATED and must be used only on ARM32
system with secure access. We don't have a reliable dynamic way to detect
if the system is running secure. This series tries to use the best safe
method by relying on the availability of MCPM(as it was prior to the series).
It is upto the MCPM platform driver to decide, if the system is secure before
it goes ahead and registers its drivers and pokes the CCI. This series doesn't
address/solve the problem of MCPM. I will be happy to use a better approach,
if there is any.

Tested on (non-secure)TC2 and A53x2.

Changes since V3
 - Patch 5 : Use unsigned long for CCI_PMU_EVENT_MASK (Suggested-by: Will Deacon)
 - Patch 3 : Fix misspelled 'DEPRECATED' in dev_warn().
 - Added the ACKs and Reviews.

Changes since V2

 - Include suggestions from Sudeep Holla.
 - Cleanup event validation checks.

Changes since V1 (Suggestions from Nicolas Pitre):

 - Split Patch 2 to separate the 'PMU' abstraction(now Patch 2/5)
   from the introduction of a new device-tree binding(now Patch 3/5)
 - Rename
	ARM_CCI400_MCPM => ARM_CCI400_PORT_CTRL
	CCI400_MCPM_PORTS_DATA => CCI400_PORTS_DATA
 - Select ARM_CCI400_COMMON for ARM_CCI400_PORT_CTRL
 - Better documentation in the git commit log about the ARM_CCI config.
 - Move the 'pr_info' to its apporpriate patch.


Suzuki K. Poulose (5):
  arm-cci: Rearrange code for splitting PMU vs driver code
  arm-cci: Abstract the CCI400 PMU speicific definitions
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Fix CCI PMU event validation

 Documentation/devicetree/bindings/arm/cci.txt |    7 +-
 arch/arm/include/asm/arm-cci.h                |   42 +++
 arch/arm/mach-exynos/Kconfig                  |    2 +-
 arch/arm/mach-vexpress/Kconfig                |    4 +-
 arch/arm64/include/asm/arm-cci.h              |   27 ++
 drivers/bus/Kconfig                           |   28 +-
 drivers/bus/arm-cci.c                         |  498 ++++++++++++++-----------
 include/linux/arm-cci.h                       |    9 +-
 8 files changed, 385 insertions(+), 232 deletions(-)
 create mode 100644 arch/arm/include/asm/arm-cci.h
 create mode 100644 arch/arm64/include/asm/arm-cci.h

-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/