Re: [PATCH 2/3] mfd: qcom_rpm: add support for IPQ8064

[Stephen Boyd]

On 11/24/14 02:38, Lee Jones wrote:
> On Thu, 20 Nov 2014, Josh Cartwright wrote:
>
>> The IPQ8064 also includes an RPM following the same message structure as
>> other chips.  In addition, it supports a few new resource types to
>> support the NSS fabric clocks and the SMB208/SMB209 regulators found on
>> the reference boards.
>>
>> Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
>> ---
>>  drivers/mfd/qcom_rpm.c | 41 +++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 41 insertions(+)
> For my own reference:
>
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
>

Lee, can you pick this patch up please?

>> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
>> index 0dd7a6fe..5ead23b 100644
>> --- a/drivers/mfd/qcom_rpm.c
>> +++ b/drivers/mfd/qcom_rpm.c
>> @@ -324,10 +324,51 @@ static const struct qcom_rpm_data msm8960_template = {
>>  	.n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
>>  };
>>  
>> +static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
>> +	[QCOM_RPM_CXO_CLK] =			{ 25, 9, 5, 1 },
>> +	[QCOM_RPM_PXO_CLK] =			{ 26, 10, 6, 1 },
>> +	[QCOM_RPM_APPS_FABRIC_CLK] =		{ 27, 11, 8, 1 },
>> +	[QCOM_RPM_SYS_FABRIC_CLK] =		{ 28, 12, 9, 1 },
>> +	[QCOM_RPM_NSS_FABRIC_0_CLK] =		{ 29, 13, 10, 1 },
>> +	[QCOM_RPM_DAYTONA_FABRIC_CLK] =		{ 30, 14, 11, 1 },
>> +	[QCOM_RPM_SFPB_CLK] =			{ 31, 15, 12, 1 },
>> +	[QCOM_RPM_CFPB_CLK] =			{ 32, 16, 13, 1 },
>> +	[QCOM_RPM_NSS_FABRIC_1_CLK] =		{ 33, 17, 14, 1 },
>> +	[QCOM_RPM_EBI1_CLK] =			{ 34, 18, 16, 1 },
>> +	[QCOM_RPM_APPS_FABRIC_HALT] =		{ 35, 19, 18, 2 },
>> +	[QCOM_RPM_APPS_FABRIC_MODE] =		{ 37, 20, 19, 3 },
>> +	[QCOM_RPM_APPS_FABRIC_IOCTL] =		{ 40, 21, 20, 1 },
>> +	[QCOM_RPM_APPS_FABRIC_ARB] =		{ 41, 22, 21, 12 },
>> +	[QCOM_RPM_SYS_FABRIC_HALT] =		{ 53, 23, 22, 2 },
>> +	[QCOM_RPM_SYS_FABRIC_MODE] =		{ 55, 24, 23, 3 },
>> +	[QCOM_RPM_SYS_FABRIC_IOCTL] =		{ 58, 25, 24, 1 },
>> +	[QCOM_RPM_SYS_FABRIC_ARB] =		{ 59, 26, 25, 30 },
>> +	[QCOM_RPM_MM_FABRIC_HALT] =		{ 89, 27, 26, 2 },
>> +	[QCOM_RPM_MM_FABRIC_MODE] =		{ 91, 28, 27, 3 },
>> +	[QCOM_RPM_MM_FABRIC_IOCTL] =		{ 94, 29, 28, 1 },
>> +	[QCOM_RPM_MM_FABRIC_ARB] =		{ 95, 30, 29, 2 },
>> +	[QCOM_RPM_CXO_BUFFERS] =		{ 209, 33, 31, 1 },
>> +	[QCOM_RPM_USB_OTG_SWITCH] =		{ 210, 34, 32, 1 },
>> +	[QCOM_RPM_HDMI_SWITCH] =		{ 211, 35, 33, 1 },
>> +	[QCOM_RPM_DDR_DMM] =			{ 212, 36, 34, 2 },
>> +	[QCOM_RPM_VDDMIN_GPIO] =		{ 215, 40, 39, 1 },
>> +	[QCOM_RPM_SMB208_S1a] =			{ 216, 41, 90, 2 },
>> +	[QCOM_RPM_SMB208_S1b] =			{ 218, 43, 91, 2 },
>> +	[QCOM_RPM_SMB208_S2a] =			{ 220, 45, 92, 2 },
>> +	[QCOM_RPM_SMB208_S2b] =			{ 222, 47, 93, 2 },
>> +};
>> +
>> +static const struct qcom_rpm_data ipq806x_template = {
>> +	.version = 3,
>> +	.resource_table = ipq806x_rpm_resource_table,
>> +	.n_resources = ARRAY_SIZE(ipq806x_rpm_resource_table),
>> +};
>> +
>>  static const struct of_device_id qcom_rpm_of_match[] = {
>>  	{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
>>  	{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
>>  	{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
>> +	{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
>>  	{ }
>>  };
>>  MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/