[PATCH 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips

From: Brian Norris
Date: Wed Mar 18 2015 - 21:24:35 EST


Pretty straightforward driver, using the nice library-ization of the
generic ahci_platform driver.

Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
---
drivers/ata/Kconfig | 9 +++
drivers/ata/Makefile | 1 +
drivers/ata/sata_brcmstb.c | 148 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 158 insertions(+)
create mode 100644 drivers/ata/sata_brcmstb.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f601553b9b0..33d4b3031705 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -98,6 +98,15 @@ config SATA_AHCI_PLATFORM

If unsure, say N.

+config SATA_BRCMSTB
+ tristate "Broadcom STB AHCI SATA support"
+ depends on ARCH_BRCMSTB
+ help
+ This option enables support for the AHCI SATA3 controller found on
+ STB SoC's.
+
+ If unsure, say N.
+
config AHCI_DA850
tristate "DaVinci DA850 AHCI SATA support"
depends on ARCH_DAVINCI_DA850
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index ae41107afc1f..5d1e6a96bc93 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_ATA) += libata.o
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
+obj-$(CONFIG_SATA_BRCMSTB) += sata_brcmstb.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
diff --git a/drivers/ata/sata_brcmstb.c b/drivers/ata/sata_brcmstb.c
new file mode 100644
index 000000000000..2a3aff419332
--- /dev/null
+++ b/drivers/ata/sata_brcmstb.c
@@ -0,0 +1,148 @@
+/*
+ * Broadcom SATA3 AHCI Controller Driver
+ *
+ * Copyright  2009-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+#include "ahci.h"
+
+#define DRV_NAME "brcm-ahci"
+
+#define SATA_TOP_CTRL_VERSION 0x0
+#define SATA_TOP_CTRL_BUS_CTRL 0x4
+
+#ifdef __BIG_ENDIAN
+#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
+#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
+#else
+#define DATA_ENDIAN 0
+#define MMIO_ENDIAN 0
+#endif
+
+struct brcm_ahci_priv {
+ struct device *dev;
+ struct ahci_host_priv *hpriv;
+
+ void __iomem *top_ctrl;
+};
+
+static const struct ata_port_info ahci_brcm_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static void brcm_sata3_init_config(struct brcm_ahci_priv *priv)
+{
+ /* Configure endianness */
+ writel((DATA_ENDIAN << 4) | (DATA_ENDIAN << 2) | (MMIO_ENDIAN << 0),
+ priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+}
+
+static int brcm_ahci_suspend(struct device *dev)
+{
+ return ahci_platform_suspend(dev);
+}
+
+static int brcm_ahci_resume(struct device *dev)
+{
+ struct brcm_ahci_priv *priv = dev_get_drvdata(dev);
+
+ brcm_sata3_init_config(priv);
+ return ahci_platform_resume(dev);
+}
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
+static int brcm_ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct brcm_ahci_priv *priv;
+ struct ahci_host_priv *hpriv;
+ struct resource *res;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ dev_set_drvdata(dev, priv);
+ priv->dev = dev;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ priv->hpriv = hpriv;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
+ priv->top_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->top_ctrl))
+ return PTR_ERR(priv->top_ctrl);
+
+ brcm_sata3_init_config(priv);
+
+ ret = ahci_platform_enable_resources(hpriv);
+ if (ret)
+ return ret;
+
+ hpriv->plat_data = priv;
+
+ ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
+ &ahci_platform_sht);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "Broadcom AHCI SATA3 registered\n");
+
+ return 0;
+}
+
+static const struct of_device_id ahci_of_match[] = {
+ {.compatible = "brcm,sata3-ahci"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
+
+static struct platform_driver brcm_ahci_driver = {
+ .probe = brcm_ahci_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = ahci_of_match,
+ .pm = &ahci_brcm_pm_ops,
+ },
+};
+module_platform_driver(brcm_ahci_driver);
+
+MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
+MODULE_AUTHOR("Brian Norris");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sata-brcmstb");
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/